Jump to content
SAU Community

Recommended Posts

iLL BE PURCHASING AQUIET A FEW BITS AND BOBS FROM AN AUSSIE DISTRIBUTOR AND IF YOU LIKE, I CAN GIVE YOU A BIT OF A REVIEW ON THIER PRODUCT, SUPPORT AND QUALITY. I HAVE A PRETTY EXTENSIVE KNOWLEDGE OF AUTOMOTIVE THINGS, BUT NOT AS EXTENSIVE AS SOME ;) IF YOU LIKE NISMOID, PM ME AND WE CAN DISCUSS IT FURTHER.

CHEERS, ALLAN

  • Replies 54
  • Created
  • Last Reply

Top Posters In This Topic

Thought after last nights meeting and mentioned to Luke, both of us are interested. Between us, he is a qualified mechanic with access to workshop/hoist and I should be able to do the admin stuff and put a decent review together from his dot points. :)

  • 2 weeks later...

Ok I'll have some spare time the next week so I will be creating a new section of the forum.

Anyone that has expressed interest thus far will be given access to this section (it will be private).

Then we can start discussions with the aim to launch sometime in Q1 2012 :)

Oh, and you guys will all get a cute like "Review Team" bar under your names :thumbsup:

Ash,

I'm keen.

Happy to do some reviews.

Unfortunately I can only comment on 'upgrades' to an M35 Stagea and a Datsun 1600 which I am about to upgrade a few engine components.

I can comment on generic oil/intercooers/seat belts/ Race seats/ engine air-fuel meters etc. and generic components which can be used on either etc.

Let me know if you want some engineering input.

I can comment on reviews and if the component/modification may affect whether the car requires an engineering cert (to remain legal in Victoria. Other states I have NFI!)

I can also comment if the review requires more testing/ statistical data, or more appropriate information to justify certain claims.

I bought some off the shelf chassis stiffening to play and test with during this summer break. I also have some other simple "modifications" to do which aren't so much products but really things to do with your car.

I am a Experimental Physics student so understand high quality quantifiable data - my R33 GTS-T is my experiment. I was planning measure quantifiable data when doing all my modifications over the summer anyway and I would very much enjoy being able share that knowledge with the public.

Will you enable LaTeX support in this section of the forum? :thumbsup:

:cheers:

  • 2 weeks later...

The entirely new Review Section (it's a new forum) is live for those who've shot some interest in area's of this etc.

I'll let you boys work out where it is... If you can't work it out then I am deeply worried haha :nyaanyaa:

Of course - could always do with more people. If you want in, let us know :thumbsup:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...