Jump to content
SAU Community

Recommended Posts

  • Replies 57
  • Created
  • Last Reply

Top Posters In This Topic

The last 304 3 inch 90's I bought were $25 each.

I usually lobster my bends but the Brobo I have wont cut bigger than 3.5 inch. I have a couple of big power systems to make soon and would have to get mandrels for it but how the hell do people clear speed humps with over 100mm of pipe hanging under the car? I think I will instead make oval tubing, say 3 x 6 inch, hopefully the owners will agree...

Hey guys

got the GTR goin into the exhuast within the next couple of days and trying to get a figure on how much i should be paying...

the set up is a single high mount borg warner on a twinscroll manifold

Basically the work i need done is a

4 inch v-band dump pipe to the cat

plumb the two wastegates into the exhuast

setting up the plumbing from compressor side of the turbo to the intercooler

im guessin stainless will be the way to go?

any input is welcome

cheers

The guy they use is really good, so dont stress over that.

I'd go stainless, it's more costly but when it comes to GTR's the phrase "Do it once, do it right" always springs to mind

You didnt do very well in maths at school right? Double? Lol

For example a 90 3" mandrel in ss is 3 times the price of ms.

Please post pics of the completed job so we can all drool.

Yeah they cost about $35-$40 if you buy them at a wholesaler

Retail somewhere about $60 ofr a 90 bend

The last 304 3 inch 90's I bought were $25 each.

I usually lobster my bends but the Brobo I have wont cut bigger than 3.5 inch. I have a couple of big power systems to make soon and would have to get mandrels for it but how the hell do people clear speed humps with over 100mm of pipe hanging under the car? I think I will instead make oval tubing, say 3 x 6 inch, hopefully the owners will agree...

If you can provide me details of your stainless pipe supplier I would greatly appreciate it. I'm clearly paying too much from Tubesales. I only buy small quantities but if you can get them at half the price then it would be worth my while getting them freighted up here. I do a fair bit of custom exhaust work here.

Just finished a 4inch full system on a 34GTR. He supplied the manifold and gate etc and it uses that flexible stuff you guys are talking about. Looks like rows hooked into each other. Seems to work pretty well and the heat coating we had done didn't affect it negatively and its strength is good too. Makes wastegate plumbing very easy.

For other options, we use a 2inch flexible bellows - they are like a braid outer with a spring inside to bend. Makes aligning Vbands a sexual experience

wow when i get the stainless bends of my mate ( not sure of the supplier it was only 10-20 dollars dearer then MS ?) 304 grade ? anyway my friend has the flexi tubing on the end of his wastegate pipe so he can plumb it in or leave it vent to the atmosphere works great and excellent idea!!

Well thats it isnt it.. definatly dont want the job to look like sh!t and i dont wanna have to come back and do it again

Do u know the name exhaust shop they use Steve? have u delt with them before?

Ill go the stainless cause i will be happier with the look no doubt

will be asking about this flexible hose as well Dan

Yavuz is booked out for a while yet.... whats another 3 weeks after already having the car off the road for 15 months :thumbsup:

fairly certain ive already got Brads number.. hes doin up a custom catch can for me when im ready

Edited by GTR_JOEY
  • 3 months later...

Righto, has been a while since i posted this thread

car is now at the exhaust shop and is close to being finnished,

Hack from performance exhnaust in Northmead is doing the work and from what i can see so far he has done a great job

Ive got some pics of the dump and cat, with wastegate pics to follow soon

cheers mate,

Do have plans on going to a few events, (somthing coming up on the 19th of Feb?)

anyway Paul and Steve-O have my event calander planned lol

will probably just tag along to what ever they do :thumbsup:

righto exhaust job is nearly done... here's some more pics, not everything is bolted up yet so gives a good idea of what the pipes look like

For those interested in how much its costing all up PM me and ill let you know

cheers

post-47556-0-88580600-1328167488_thumb.jpg

post-47556-0-84498300-1328167566_thumb.jpg

post-47556-0-95952100-1328167631_thumb.jpg

post-47556-0-02071900-1328167759_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I drive the Tiguan much harder than the Skyline in all conditions, because it just grips and hooks, unlike the R33 shit box
    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
×
×
  • Create New...