Jump to content
SAU Community

Recommended Posts

My company is currently looking to hire some young people who want to get into the I.T. industry. Both for Sydney and for Melbourne.

Why young? Because the starting pay is pretty low, but jumps quickly as you progress in your career ;)

Must be reliable, fast learner, have good work ethics, and a drivers license+car.

The company deals with enterprise hardware (servers, big storage, etc.), so once you get settled into this part of the industry, you can make some big $$$.

Ideally you would be finishing TAFE or some sort of I.T. uni degree and want to start working. Training is provided by the company. If you have messed with computer hardware then you'll pick up the work very quickly.

PM me for more info.

Note: If this is against forum rules, I apologise. Feel free to delete this thread if so.

Link to comment
https://www.sau.com.au/forums/topic/379060-want-to-get-into-the-it-industry/
Share on other sites

Support Engineer (Field services, i.e. go out and fix stuff).

Deal mainly with servers, but also deal with storage (disks, tapes) and other enterprise equipment.

If you have a certification/qualification in an OS or device (e.g. CCNA, AIX/Solaris admin), feel free to contact me.

P.S. I'm not a recruiting person, I work for this company lol. I'm trying to get locals into our technical team.

Sent Today, 08:51 PM

Hey mate,

Really interested In this I.T job.. I have 5 Years customer service Training, Cert 2/3 Retail supervision/management.

I have worked In a Computer LAN Cafe for A year, And I Am clever when It comes to computer software and hardware.

I have My Licence and Just turned 18! And am ready to start as soon as possible.

Regards,

Justin

Hey Mate,

Interested in this I.T. job but, if it has an part time position. I am still studying my I.T. degree.

Got a Diploma of Information Technology Networking from TAFE

Current Experience is Computer sales at the Good Guys and doing tech support when customer comes back with a computer.

I have my License and have a car.

From: Albert

I would be very Interested in this job if mine falls through atm.

i have been working 3 days for the past 2 months at Prfessional IT in Taren Point and they do the same thing. i love the job and if i dont get my trainee ship there i would definately look for somewhere that does the same thing.

i will be completing my hsc exams soon, i have qworked at maccas for 4 years so im good qwith customers and im a very quick learner.

So if my traineeship falls through ill be in contact

Hey sorry for going a bit off topic but do you have any advice for someone trying to get into the I.T industry?

Im 24 and have spent most my time in construction but i can't stand it anymore and want to get into something that i enjoy and that has some career prospects.

For Nissan nutter do a certificate and diploma at tafe would be a good start I knew plenty of student similar to u now either in university with me or work in the information technology full time now

As above, look at doing a TAFE course, then you'll have to find an entry level job with a low pay. After you get some experience, you can get more certs/get a better paying job and start specialising in an area (networking, hardware, operating system, applications).

Hey Nizmo_man if they do decide on opening up a part time position let me know i would be keen.

Also Christmas break is approaching so full time is okay until next year when university starts.

Plus I can work everyday except Monday

Hey sorry for going a bit off topic but do you have any advice for someone trying to get into the I.T industry?

Im 24 and have spent most my time in construction but i can't stand it anymore and want to get into something that i enjoy and that has some career prospects.

Depends what you want to do, for instance I am in programming, and if that was your field of interest, I would say pick a language and build something/do some open source software, if your interest is hardware I would suggest tafe or something as it's not as easy to "just do something" in hardware.

Sounds ineteresting. I don't have any of the CCNA stuff but I do have a Bachelor in computer science. Also located in Sydney and currently working night shifts. If you think I may be suited PM me man ill send you a resume. My strongest points in IT are hardware support, software support and software development(my course was oriented around software development but Ive also got a cert 4 in programming and a advanced dimploma in software development which did cover hardware shit).

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
×
×
  • Create New...