Jump to content
SAU Community

Recommended Posts

We've got a few staff changes, comings and goings... so just had finger food lunch in the sunshine with a few bottles of champagne... Think I'll avoid doing any work on Production Servers for the rest of the afternoon, just in case.

Always test on the production servers

Hipsterman, Gold Standard vanilla ice cream flavor. Get on it!

It's sad I'm replying to this name...

However yes, that's the one I used to have brah! I thought it tasted pretty terrible with water tbh, but amazing with milk!

so for lunch some mexican with margaritas...cos 10 hours later it means I get some privacy.

Sitting in the qantas International lounge now having a glass of Coldstreams hills Pinot noir with some papadams.

30 hours ahead of free booze and food for me..then couple hours sleep and stream bathurst..

your new.

don't leave till 15 min after expected to, well if you want to make a good opinion.

they will be less stressed about quality of work ATM more how enthusiastic you are.

show them you will put in an effort even it it means waiting till after knock off time on fri with no work.

basiclly we don't keep anyone on who bails early after 2 weeks.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Its also worth mentioning that 30 years after it left the factory and god knows how many missed oil changes since, there is every possibility that one or more lifters are ticking because they are sticky/gummed up. To resolve that you need to pull the cams then pull each lifter, disassemble, clean, reassemble, soak in oil and re-install, and they should come up good as new.
    • What air filter are you running? Is it a panel filter in the stock air box, or a pod filter? Is the air filter the type that is oiled?   If you unplug the IACV, what rpm does the engine idle at?
    • Reading through the engine service manual their advice is do a cylinder balance test. Unplug one injector at a time and see if the idle drops a consistent RPM. You can also do this using a Consult cable which is easier. They also call for unplugging the power transistor, then with the engine off and the fuel rail unhooked from the manifold verifying that you have good fuel flow (even injection, no dripping/leaks, etc) when you twist the CAS by hand. Also verify the spark by pulling the spark plugs and allowing the plugs to ground and turning the CAS by hand. I would also start doing the sensor checks and idle valve checks in service manual. Make sure the MAF tests reasonably, the intake air regulator is sane, etc. You may have to get new spark plugs.
    • This sounds very old of me, however since buying the Tiguan shit box, my view on shit boxes have changed.
    • I've looked up the parts number (41011AL501). It's around $700 OEM. Usually our Infiniti G35 here in Canada have interchangeable parts with my Stagea but the parts number are not the same. I have looked around and it seems the JDM 2005 V35 Skyline (which is the same as our G35) has the same caliper but I cannot confirm. And I can't find a repair kit. The inner brake pads drags on the rotor, seems to be rusty piston. Thanks for the info by the way
×
×
  • Create New...