Jump to content
SAU Community

Recommended Posts

g'day all, i'm just testing the interest at the moment for a potential part out, car is a massaged R32 GTR, 100% complete car with the following mods (looking at possibly selling EVERYTHING)

built RB26DETT with eagle H beam rods, CP forged pistons and possibly other part's, GT2860RS turbo's (-5's?) front mount intercooler, oil cooler, powerFC, boost controller, engine and turbo's has 14'000 KM on it, not 100% on all of the engine mods, yokohama advan RS 18*10 rims, brembo brakes, carbonetic twin palte carbon clutch, blitz BOV.

how much interested would i get in the car basic's, eg drive shaft's, box, diff's, control arm's, panels, shell, sound system ect.

body is black, in fair but not great condtion, most of interior is in poor condition.

if i get enough interest i will start pulling the car apart for part out, cheer's.

Edited by ttoks
Link to comment
https://www.sau.com.au/forums/topic/380739-eoi-complete-r32-gtr-part-out/
Share on other sites

I'm interested in a complete head/wiring loom?

also the front right axle and front tail shaft.

hot33r will take the bottom end so theres the motor!:thumbsup:

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
×
×
  • Create New...