Jump to content
SAU Community

Recommended Posts

OK, after many dissapointing ventures into spray can "gloss" laquers for minor body repairs, I though I'd try the 3M Clear laquer, very impressed with it once you giveit a healthy polish. But then I started pondering it's use on my tyres....wowee....permanent new tyre shine with minminal dirt pickup and easy to clean (no polishing required....Vote #1 3M clear laquer!!!!

Edited by 666DAN
Link to comment
https://www.sau.com.au/forums/topic/380754-permanent-tyre-shine/
Share on other sites

the only long lasting tyre shine ive ever used was the meguiars gel one that you have to rub on - which is just time consuming ..

all the cans one last ****all for me .. but i have to keep trying new ones

in the meantime i just use the aussie export stuff lol $10 for 4 cans!

I may give what dan said a try :)

Lateral thought:- Spray it on the treads > No need to replace tyres :P > Steppin' out with skids :P

LOL made a massive effort to avoid traction reduction haha, will grab a pic. The stuff has been on a while and the tyres still look new. Even dust doesn't love them anymore.

You just need to give the tyres a good clean, applying some of that plastic primer doesn't hurt either. Scrubbing the tyres will wear it off though, so touchups are required if you're a bit curb happy haha

^ it only advertises 2 weeks on the site

but i guess its better if lasts longer than they say, rather than a false claim for months

I called up and had a chat with antonio - i might order a small bottle of poorboys gel and the normal poorboys just to see the difference in application and which i prefer more - their good for the price, carpro PERL by your recommendation is also usable on tyres apparently! ill have to see which i prefer. Keen to try out PERL though, seems like a really good product.

Im using the meguiars gel stuff at the moment but thats a nightmare to apply, and the foam applicator pads keep breaking apart - the yellow/black bits dont stay together

but also as a note applying Xenit to tyres definitely makes tyre shine stick on for longer :)

btw anybody still use that $2 aussie export stuff?

back in the day it used to last decently but the last few cans ive bought last all of .. 10 minutes ..

Xenit :)

its great stuff

also useful for any tough stains on fabric etc

I use this for the more difficult stuff, but i try to use something like FI's GPC where I can, its just alot cheaper - not too sure what alternatives there are to this though

but grab xenit, works wonders on stained tyres

As Jonno said, the Aussie export stuff lasts SFA time. What ive found to work best is, put down a layer or two of the meguires endurance tyre gel (which in itself works awesome + it smells like sexy grape lol) let it dry off for 5 to 10 minutes. Then after its dryish spray it with the aussie export spray on shine, stuff works briliantly and cause the endurance gel stays on the tire even when the export stuff wears off (albeit after about 1 or 2 days) your still left with the relatively shinny Meguires layer.

This is what i use on my car anyway :) (i just cant bring myself to spray a clear coat onto my tires lol)

Edited by Nikk_666

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So..... it's going to be a heater hose or other coolant hose at the rear of the head/plenum. Or it's going to be one of the welch plugs on the back of the motor, which is a motor out thing to fix.
    • The oil pressure sensor for logging, does it happen to be the one that was slowly breaking out of the oil block? If it is,I would be ignoring your logs. You had a leak at the sensor which would mean it can't read accurately. It's a small hole at the sensor, and you had a small hole just before it, meaning you could have lost significant pressure reading.   As for brakes, if it's just fluid getting old, you won't necessarily end up with air sitting in the line. Bleed a shit tonne of fluid through so you effectively replace it and go again. Oh and, pay close attention to the pressure gauge while on track!
    • I don't know it is due to that. It could just be due to load on track being more than a dyno. But it would be nice to rule it out. We're talking a fraction of a second of pulling ~1 degree of timing. So it's not a lot, but I'd rather it be 0... Thicker oil isn't really a "bandaid" if it's oil that is going to run at 125C, is it? It will be thicker at 100 and thus at 125, where the 40 weight may not be as thick as one may like for that use. I already have a big pump that has been ported. They (They in this instance being the guy that built my heads) port them so they flow more at lower RPM but have a bypass spring that I believe is ~70psi. I have seen 70psi of oil pressure up top in the past, before I knew I had this leak. I have a 25 row oil cooler that takes up all the space in the driver side guard. It is interesting that GM themselves recommend 0-30 oil for their Vette applications. Unless you take it to the track where the official word is to put 20-50w oil in there, then take that back out after your track day is done and return to 0-30.
    • Nice, looks great. Nice work getting the factory parts also. Never know when you'll need them.
    • Thanks @jtha7 I will have a look around tomorrow but it is a prick of a spot. These are some photos i tried taking 
×
×
  • Create New...