Jump to content
SAU Community

Recommended Posts

  • 3 weeks later...

Hey guys, what's the most affordable option to get onto EC for a track day? I had a look on the ARDC site and all I could find were Track days (which start at 12.30pm so it's not even a full day) and they cost $340! Last time I looked the L2S days were about $190, but I can't seem to find them. I'm considering supersprints, but my car isn't rego'd or have a cams logbook. Any other ideas?

Cheers!

Hey guys, what's the most affordable option to get onto EC for a track day? I had a look on the ARDC site and all I could find were Track days (which start at 12.30pm so it's not even a full day) and they cost $340! Last time I looked the L2S days were about $190, but I can't seem to find them. I'm considering supersprints, but my car isn't rego'd or have a cams logbook. Any other ideas?

Cheers!

I went to http://www.skylinesaustralia.com/forums/topic/400359-eastern-creek-north-track-day-sat-02-june-invite-to-sau/ and had a great time - recommend any day Brett (WalkyHR31) puts on. It was raining and 5 cars ended up bent... I cut up the others in my session - Fed RSRs are great in the wet :yes:

Turns out that Eastern Creek still runs the L2S days! Here's the calendar:

7 September - Cars / Bikes / L2S (South Circuit)

21 September – NSWMRC COMPETITORS ONLY (North Circuit)

12 October - Cars / Bikes / L2S (South Circuit)

20 October – Cars - COMPETITORS ONLY (Full Circuit)

7 December - Cars / Bikes / L2S (Full Circuit)

And pricing:

A.R.D.C. Members – $105 (including GST)

Non-members – $135 (including GST)

Garage (optional) – $25 (including GST)

Which is damn cheap. They also accept AASA licences which I wasn't aware of. Hooray :banana:

EDIT: Does anyone know what they mean by 'COMPETITORS ONLY"?

link: http://www.ardc.com.au/articles/General/Sydney-Motorsport-Park-Private-Practice-Days-2012/68

  • 3 weeks later...

Watchin that video, the category they r in doesnt seem very even. Those 2 commos fired past half a dozen cars before turn 1, then continued to pull away. I can believe the guy is allowed to race, hes rubbish.

its the production car category that I race in, there are 5 classes, he is in class A but didn't do qaulifying so had to start at rear of grid (40 cars back). Plenty of cars finished in front of him, mostly 4wd turbos eg emo Xs.

the driving standards of course have been a point of frequent discussions....who needs repair bills.

  • 2 weeks later...

Repair bills indeed!

Interesting class. with such a slow field, you'd need to carve it up as fast as possible. Cant clearly see the first shunt but the second certainly should have him before the stewards.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...