Jump to content
SAU Community

Recommended Posts

Hi all, picked up our 01 m35 last weekend.While we love the car for its size(have kids) and looks, have had a few issues stopping me from seeing what the car is really like(if you know what i mean).

Firstly the exhaust had a blockage and a leak so had the 4 tonne boat anchor taken out and replaced. But the turbo would appear to be having issues,it whistles quite loudly(i am comparing this to my subaru i just got out of)but also sounds like it has a slight leak.My mechanic checked it out and it has no leaks so this week he is going to check the turbo,seems to think that the compressor is rubbing on the housing (i think thats what he said lol) has anyone had to deal with this before any help would be appreciated.

Anyway great forum with heaps of info

this is her, i will give it a good clean and polish this weekend

P1020214.jpg

Link to comment
https://www.sau.com.au/forums/topic/382920-new-to-the-stag/
Share on other sites

Mine is the same with the whistle. I was told it was a sign the turbo was out of balance, but all of them seem to be like that.

I think it's just inevitable that you'll have to replace the turbo, but the whistle isn't automatically the sign.

Oh and exhaust out is great, just make sure you do the dump pipe too! There are a few options now depending where you are. Scotty on here does them, and AM Performance in Adelaide do them. These seem to be the proven options.

Link to comment
https://www.sau.com.au/forums/topic/382920-new-to-the-stag/#findComment-6107958
Share on other sites

Congrats on the new purchase, looks good.:thumbsup:

The turbo on these is quite noisy anyway, so you may not necesssarily have an issue, but it might be worth getting your mechanic to check out the oil feed banjo bolt to the turbo, while he's poking around; to check for blockage. If you've freed up a blocked exhaust; you're probably getting proper boost now, hence the extra noise.

My turbo has been noisy since I bought it, and 45000km later still going strong; not any noisier, but I did pull the banjo out and drill it to 2mm.

Best of luck, and enjoy the new toy.

Cheers, Dale

Link to comment
https://www.sau.com.au/forums/topic/382920-new-to-the-stag/#findComment-6107986
Share on other sites

I have a stock turbo here thats nearly silent so the noise could be either the front wheel rubbing (turbo is flogged) or usually its the rear bearing on its way out (like Dale said, drill the banjo restrictor out) Dont stress, it could last years like that if it has a good oil supply.

Changeing the T3 manifold gasket with a new oem one could be a good idea too, its a pain to get in to though.

Link to comment
https://www.sau.com.au/forums/topic/382920-new-to-the-stag/#findComment-6108149
Share on other sites

These all have a loud whistle, mine does and i have test driven loads of them with all the same load whistle, a turbo upgrade would be the way to go if you need it but these ones run fine on factory 14psi. I ripped out my factory exhust and replaced with 3'' big bore but had change the rear muff as it was just too loud for us on long trips.

Link to comment
https://www.sau.com.au/forums/topic/382920-new-to-the-stag/#findComment-6109118
Share on other sites

As I have stated before, this is probably the main reason for the original Japanese owners got rid of their cars at auction. The repair bill for a replacement turbo fitted from nissan would cost more than the car is worth over there.

My turbo had a fairly loud whistle when I got it. I highflowed that one before it blew but the stock one I have here is nearly silent. After dissasembly all I could find wrong with my original was the rear bearing was contaminated with dirty burnt oil and exhaust particles. All you can do in this case is increase the oil supply and hope it doesn't fail soon.

Link to comment
https://www.sau.com.au/forums/topic/382920-new-to-the-stag/#findComment-6109155
Share on other sites

Well I will pick it up from the mechanics soon an apparently the turbo is perfect and everything seems fine so I just have a noisy turbo. Just not used to it being loud after having the quiet turbo in the Subaru.So it now needs a service for new plugs and an injector clean so I'm of to a great start with the car but at least there is nothing major stuffed on it fingers crossed

Edited by fishola
Link to comment
https://www.sau.com.au/forums/topic/382920-new-to-the-stag/#findComment-6112319
Share on other sites

When you put the foot down it boosts up then stutters like its missing,not all the time only when you give it a bit and fuel consumption is crap its used half a tank and done 170ks and that's driving like a granny. I generally get all our cars serviced not long after buying them any way plus our mechanic has only charged me for a air filter and he has had the car twice in the first week since we have had it.

Not sure how he checked it but he said its fine and I trust him he has been our mechanic for years and dealt with plenty of turbos with the rally cars he has had over the years

Edited by fishola
Link to comment
https://www.sau.com.au/forums/topic/382920-new-to-the-stag/#findComment-6112643
Share on other sites

When you put the foot down it boosts up then stutters like its missing,not all the time only when you give it a bit and fuel consumption is crap its used half a tank and done 170ks and that's driving like a granny. I generally get all our cars serviced not long after buying them any way plus our mechanic has only charged me for a air filter and he has had the car twice in the first week since we have had it.

Not sure how he checked it but he said its fine and I trust him he has been our mechanic for years and dealt with plenty of turbos with the rally cars he has had over the years

I'd also be looking at the O2 sensor.:thumbsup:

Link to comment
https://www.sau.com.au/forums/topic/382920-new-to-the-stag/#findComment-6112885
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
×
×
  • Create New...