Jump to content
SAU Community

Z32 Aftermarket Air Mass Meters On Ebay. Anyone Used/uses Them?

livewire

By livewire,
in Engines & Forced Induction

 Share

Recommended Posts

livewire Experienced

livewire

Posted
Posted

Hi people. Need new air flow meters for R33 gtr motor as mine have started playing up so figure I'll upgrade to z32's while I'm at it as I already have aftermarket turbos, Power fc etc. I've noticed a lot of them on ebay that are not Bosch or jecs ones but some still come with a Good 2 year warrenty but a lot cheaper to buy. Anyone used or uses them? If so, have you had ANy issues? are they just as good reliability and performance wise? And are they just as tuneable as the Bosch ones etc?

GTScotT Grand Master

GTScotT

Posted
Posted

I doubt anyone has used these on this forum yet. I would still recommend using a used set.

If you want to be the test mule for them Im sure plenty of people would want to see.. Up to you.

livewire Experienced

livewire

Posted
  • Author
Posted

Well apparently they are designed to meet or exceed oem meters which I think are jecs? Some come with 2 years warranty which is probably the same if not more than Bosch items. And the replacement 300zx meters range from $75-$150 as opposed to the $340 pricetag of Bosch meters. Might be worth a try. I'm willing to be a guinea pig if you guys are willing to not laugh if I waste my money lol.

The Mafia Grand Master

The Mafia

Posted
Posted

I wouldn't laugh, I'll help you where ever I can, I'm pretty good with power fc's.

There are heaps of others here that would help also. This is a genuine curiosity thing.

livewire Experienced

livewire

Posted
  • Author
Posted

Haha, maybe not so much laugh but more the 'I told you so' by the people who only believe in more expensive is always better. I'm happy to be the guinea pig anyway. Thanks for the offer on the power fc help but will get it put on the dyno cause it was only tuned last weekend but we think it was tuned with a faulty air flow meter because after removing the factory ones to do the whole clean and re-solder the car hi actually driveable now and doesn't want to stall but idles up and down constantly as though it has huge cams in it lol. Just to be clear though...if its a direct replacement for 300zx/infinity its the one I want? And will just need the z32 conversion plugs to suit rb26?

KiwiRS4T Grand Master

KiwiRS4T

Posted
Posted

I would buy a new one from an SAU retailer (I did) . If you are going to buy an Ebay knock-off there are two issues - reliabilty as in accuracy... and length of life. The second factor only time will tell but the first you really need to do back to back tests with a known good one.The rumour is that they are not accurate but I am sure everyone will be gratefull if you are willing to do the testing.

kitto Mentor

kitto

Posted
Posted

Be careful, the ones that go for $150 ARE copies!

They work, but require hours of voltage re-scaling as they are nothing like the bosch/jecs unit.

Theres an article on garage 7s website about them.

livewire Experienced

livewire

Posted
  • Author
Posted

Because the R34 costs $45-50000 and twice as much to insure. Was driving it once in two weeks if that. It was an awesome car but Thought I'd go for something a lot cheaper but still with the rb26 in it till my house is finished off :-)

benl1981 Grand Master

benl1981

Posted
Posted

Don't go the copy.

If you look hard enough you can get a new genuine one delivered for under $300. Much better option. Even second hand genuine would be better.

The copy will cost more in tuning and if it goes bung you will need to retune, The genuine items are closely controlled in terms of airflow vs voltage. I doubt the copies are.

GTRsean Grand Master

GTRsean

Posted
Posted

Lol, looks like you need to fix your profile bar under: cars!!!

A good read to tell real from fakies here:

http://forum.nistune.com/viewtopic.php?f=12&t=1431

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • brillo
      Leak from Tokico BM50 Brake Master Cylinder

      By brillo · Posted

      Hi GTSBoy, Excuse my ignorance but what does a "Bad" Knee point mean ? 
    • GTSBoy
      Leak from Tokico BM50 Brake Master Cylinder

      By GTSBoy · Posted

      HFM BM57 has a "bad" knee point, IIRC. It's not the same thing as the later R chassis MC.
    • Duncan
      Who has a Infiniti Q60, Q50 (V37)?

      By Duncan · Posted

      The ATTESSA is functionally identical to R34; there were a bunch of JDM models that continued ATTESSA including Fuga/Q70, Skyline/Q50, Cima etc as an option. All with Auto only and I think mostly for snow regions. AFAIK there were no AWD VR30DDTT sold in Australia - it is on my to do list to check regs for racing a LHD car in Targa/ATR/AASA/CAMS events because if I can get the auto to work it would be interesting to run a 4wd car The Ecuteck TCM tuning is the same model as their ECU tuning, they already have it for R35 and Dose's favourite, BMW. You buy "points" to allow your computer to be tuned, buy either a bluetooth (phone app) or bluetooth+USB+Key (phone and PC) dongle, and pay for a tune that will be locked to your tuner ( ). You can also access the tuning software yourself but 1. it is mega expensive and 2. these computers have a billion parameters that intersect, so how could you ever spend enough time on it to get a decent result.
    • MBS206
      Who has a Infiniti Q60, Q50 (V37)?

      By MBS206 · Posted

      Or, is it a case of what it is like owning an R series Skyline? NFI what the previous owner has done or fiddled with... Ha ha ha After reading through this thread, I went on a bit of a research about the Q50/Q60. Now I'm quite intrigued by them! Is the AWD in them more like a WRX where it's always AWD, or is it more like the ATTESSA in the GTRs? By the sound of this TCU tuning, this sounds like a case of someone has made some real software for it, and you just need the right piece of hardware, and then you license that specific vehicle/TCU. Or is this a case of the software will be really expensive so only a few tuners have it, and you still have to pay a license per vehicle?
    • CF.Panda
      R34 25GT Engine Light 21

      By CF.Panda · Posted

      By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
×
×
  • Create New...