Jump to content
SAU Community

Recommended Posts

I just bought a netgear wifi extender that acts like a repeater. main reason i got it was so that i could plug my tv, ps3 etc over Ethernet (into the extender) and get better connections on them. working a treat so far

Previously had the d-link powerline AV kit (Ethernet over power) hooked up to a 5 port router which worked fine for ages then all of a sudden had a mass of connection problems between the two EoP units.

Link to comment
https://www.sau.com.au/forums/topic/383311-wifi-range/#findComment-6119352
Share on other sites

if you're talking point to point, a couple of guys from work have set up Ubiquiti Nanostations between their homes from the TV aerial, with ~500m distance LOS of course.

I can get signal from our Cisco WAPs at work up to 100m away (as in a usable signal)

Link to comment
https://www.sau.com.au/forums/topic/383311-wifi-range/#findComment-6120315
Share on other sites

I could borrow a 'friends' internet from across the apartment block, must have gone through at least 2-3 slabs of concrete and was on the opposite side as i had to build a "dish" to increase the signal :D

So roughly at least 150m with the little enhancement, worked well. Got a increase of around 25% (up from 25%) so it was usable for its purpose.

Link to comment
https://www.sau.com.au/forums/topic/383311-wifi-range/#findComment-6120413
Share on other sites

ubiquiti? yeah, we're looking at creating a private wireless network to all the guys who actually live in Mildura for teamed internets, and therefore awesome torrenting potential

Yep, one of the point-to-point setups, it was ~$700 I think.

Pretty sure I have used those, seemed to be all good then a car pulled in and the link died. Was about 30M with two glass doors between the two points, I suspect one had metalic tint though. Ended up running a cable.

Link to comment
https://www.sau.com.au/forums/topic/383311-wifi-range/#findComment-6122419
Share on other sites

ubiquiti? yeah, we're looking at creating a private wireless network to all the guys who actually live in Mildura for teamed internets, and therefore awesome torrenting potential

The ubiquti stuff is supposed to be really good from what i have heard.

Longest range i have seen is about 150m. We run all cisco stuff at our school, and had this older couple come in one day asking about there laptop, it was obvious they weren't students or parents either. They lived in a house that was about 150m away from the school, and since we moved fron netgear to cisco their laptop started auto-connecting to our schools open wireless network! They were running wireless B in their house from memory, and our wireless N that was more than 150m away was giving a stronger signal and they had somehow set it up so it autoconnects to our network! We had a laugh and had to set the laptop up for them and haven't had another problem since.

Link to comment
https://www.sau.com.au/forums/topic/383311-wifi-range/#findComment-6126103
Share on other sites

  • 4 weeks later...

just installed a setup on a farm

wrt54gl with dd-wrt on 150mw

used a 10dbi omni antenna mounted on a mast 15 metres AGL.

picked up a solid link up on a hill 11km away using a flat panel directional antenna. Did not do thoroughput test though :(

Was able to make a quality skype video call.

Link to comment
https://www.sau.com.au/forums/topic/383311-wifi-range/#findComment-6163526
Share on other sites

  • 1 month later...

I work for an ISP. We use the Ubiquity stuff daily. The M5 nanostations and bridges are great. Require a clear view to each other however. The Rocket M5's and M2's are also good. Havnt had much luck with the Loco 900s though. Tend to just call them junk lol.

Link to comment
https://www.sau.com.au/forums/topic/383311-wifi-range/#findComment-6224654
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That's not a transistor --- it's marked ZD1 which makes it a zener diode. As to what the breakdown voltage is, not enough there to divine.
    • Hi all, Long time since I've posted here. Looking for some advice on what I can remove to further identify the cause of my issues.  I can move the passenger seat forward and back but the knob used to adjust the seat angle is pretty much free spinning, there's very little resistance.  Removing the side cover I can see that the chain is intact but the shaft for the adjustment spins without the gear attached to it moving.  What's my next step for disassembly here? Is this a common fault? Just being a little cautious as I didn't want to start removing bolts for a spring to fly out or something equally as stupid.  Cheers
    • The incentives are mostly the same, yes. Ethanol is cheap compared to the cost of doing 98-100 RON with crude oil alone. 87 to 93-94 AKI all with E10. In 2020 Canada mandated E10 as a part of their "renewable fuel standard" and is supposedly going to go to E15 in 2030. In California where there are only 8 refineries with two threatening to shut down next year it's been over 20 years now of E10 and 91 AKI maximum because there's just not enough refinery capacity or crude oil supply relative to the demand for premium unleaded fuel. And CARB's low carbon fuel standard means functionally none of the diesel available at the pump is made from crude oil anymore. It's almost all entirely 20% biodiesel blended with 80% renewable diesel (hydrotreated vegetable oil) now. The number of gasoline vehicles that support E15 or higher ethanol concentrations is surprisingly low, I can't imagine it being wise to play tricks like this without flex fuel sensors in most of the fleet.
    • It's almost certainly the same as the one next to it. Have a fish around amongst these hits https://www.google.com/search?q=surface+mount+transistor+m33&sca_esv=9cb49794e0b2005d&source=hp&ei=2vJ5aNjTB7Kw0PEPldnS8QM&iflsig=AOw8s4IAAAAAaHoA6qkfmF6XcygtrZ4Vu9f92NXF_RFd&ved=0ahUKEwjYqIPP7MWOAxUyGDQIHZWsND4Q4dUDCA8&uact=5&oq=surface+mount+transistor+m33&gs_lp=Egdnd3Mtd2l6IhxzdXJmYWNlIG1vdW50IHRyYW5zaXN0b3IgbTMzMgUQIRigATIFECEYoAEyBRAhGKABMgUQIRigAUjKCFAAWABwAHgAkAEAmAHfAaAB3wGqAQMyLTG4AQPIAQD4AQL4AQGYAgGgAuYBmAMAkgcDMi0xoAfMBLIHAzItMbgH5gHCBwMyLTHIBwU&sclient=gws-wiz
    • South Australia, which is hardly as far behind as the rest pf Oz makes out, and who is also not a paragon of progressiveness (read that as over-legislation) in the area of vehicle standards, has this to say on the subject: Adjustable coil-over suspension Aftermarket adjustable coil-over suspension components are suspension units that incorporate an external thread on the main body and corresponding threaded spring saddle that allows the vehicle's suspension height to be varied. If fitting aftermarket or coil-over suspension components you must submit an Application to modify a light motor vehicle form and a report from a light vehicle engineering signatory (LVES).
×
×
  • Create New...