Jump to content
SAU Community

Recommended Posts

Hi all,

Long story short I have a coolant leak from my OEM cooling setup.

Turned out to be one of the end tanks leaking - where from I dont know at this time - could be end tank cracked (worst case) or could be just that the seal is gone. Will know more later.

My question is:

What is an advisable replacement item for my OEM setup which will achieve the following

  • Provide a higher level of cooling than the OEM setup
  • Look as OEM as possible (I dont mind going to a full Aluminium setup- just keeping it looking OEM is preferable)
  • Price can't be outrageous
  • Be able to cope with 35 deg / 40 deg days in SA in traffic ( I understand that this has more to do with the fan setup than anything else)
  • Fit must suit OEM cooling setup i.e. OEM clutch fan etc.

Cheers,

David

Link to comment
https://www.sau.com.au/forums/topic/383436-what-radiator-to-get-to-replace-oem/
Share on other sites

Not having massive cooling issues atm in normal weather upto about 27 odd degrees. After that the "Hot Fan" at the front of the car switches on.

All of this being said, I dont want to replace the std radiator with something that will only EQUAL the cooling capacity of the stock setup.

Considering the car is making probably twice the amount of power than the original motor made in that car; the cooling is probably a little underdone if anything.

1 such person here. A koyo radiator nor resides where my cooling pro used to be (lasted just over a year I think)

Yeh I was looking at getting a Koyo, but they are decently expensive compared to some of the other options on the market.

However, a wise man once said, you get what you pay for - and here is no different IMO. Heard a few bad stories about the 52mm thick after market items and them being no better than the OEM setup.

I have had a triple core China spec alloy radiator in my car for something like 5 years now. Much more cooling ability than the std radiator. So much so that I had to replace the thermostat imediately after I did the radiator, because the old thermostat must have been stuck open, which was working alright on the original rad, but made the engine run totally cold and use 100% more petrol on the new radiator. Fits well, never given me a moment's grief. Would not put an original plastic tanked radiator into the car in the face of that.

Yeh I was looking at getting a Koyo, but they are decently expensive compared to some of the other options on the market.

However, a wise man once said, you get what you pay for - and here is no different IMO. Heard a few bad stories about the 52mm thick after market items and them being no better than the OEM setup.

$220 delivered for mine, I think its a little thicker than what the stock one was but otherwise exactly the same as stock

Thermo fans are shit!

can't believe you said that

I could...

Anyway stick with the stock clutch fan/shroud set-up.

And do NOT buy a $300 radiator of ebay. If you want it to do the job properly you'll be spending upwards of $500 for a double/triple pass item. Most will still retain factory mount/shroud & fan without a problem.

Agreed I do not want a ebay POS

However, any recommendations on specific brands?

PWR make an awesome 3 pass I hear, however the price is a little out of what I want to spend and overkill to boot.

Agreed I do not want a ebay POS

However, any recommendations on specific brands?

PWR make an awesome 3 pass I hear, however the price is a little out of what I want to spend and overkill to boot.

Ye the PWR one is north of 800 IIRC.

Race Radiators in Melb make one, I've got one in my GTS-R. Works very well.

Eeeeerrrrrr .....no....

In traffic, at the lights, yes you will. They spin and push more air than the clutch fan at idle. Some cars will rise in temp at the lights. If you had the fan spinning faster it will cool the car, at idle, in traffic. My op was about this situation, not driving.

get an electric water pump, you will gain power by freeing up the engine from spinning one more pully.

Oh and in my GTR - on a 26 degree day, 5 laps flat chat of the Thunderdome (so around 5:30 @ full noise), hottest I saw was 95 degrees using a triple pass core.

Oil temp was certainly getting up there however, but that is unavoidable.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes I can see how that would put you off HFM, especially with the price of good quality brake fluid. From what I understand it as you say the BM50 is the standard BMC for a R32 GTR, I must admit I would like to go far a Genuine Nissan BM57, but lack of cash prevents that at present. With the price being so close between the genuine BM50 and BM57 a BM57 New it seems a better choice as you gain that 1/16 bore size with the BM57, I would be interested in how much difference you feel with the BM57 fitted. I am going to take SteveL's advice in the short term and see how much actually comes out of that proportioning valve vent and save up for the Genuine Nissan part. Thanks for clarifying the HFM failure
    • Thanks mate. I just got the post inspection 1/2 done from state roads when the starter motor packed up, either that or the car alarm system is having trouble.  OEM part number 23300-AA112.
    • Hi, I though I was coming to an end in finding a replacement starter motor for a rb25de neo. I came across a starter motor from Taarks and a message below stating: Direct fit. 11 Tooth count. All below part numbers have been superseded to 11 teeth. Can some body shed some light on going from 8 teeth to 11 teeth apart from 36-month / 25,000 km warranty for passenger vehicles to 12 Month Warranty. Compatible with the following Nissan part numbers: 23300-20P00 23300-20P01 23300-20P05 23300-20P10 23300-20P11 23300-AA111 23300-AA112 23300-AA300 23300-08U10 23300-08U11 23300-08U15  
    • Low battery? Maybe check capacity? I know first-hand, on BMWs if your battery drops below 80% capacity, it starts causing strange issues.
    • 8.5 +37 = should fit rear, but I think it'll hit on front. What you want is low 30s/high 20's front, mid 30's rear. That 17" screenshot you posted looks good, I'd run it on my R32 (but that's long dead now). For tyre sizes, my rule of thumb is: 8': 235, 9": 255. But that's just my opinion. Nismo sizes: 18x8.5+35/18x9.5+38 is a good starting point.
×
×
  • Create New...