Jump to content
SAU Community

Recommended Posts

If you have plans for more power in the future get some 1000 IDs

or http://www.trademe.co.nz/motors/car-parts-accessories/performance/fuel-systems/auction-426544512.htm

that's NZ dollars so less for you.

simon uses siemen deka injectors, the 3/4 length 60lb injectors are a direct fit but will just need to rewire new plugs. you can get this from the states the cheapest.

im runing 600cc high flows and havent had any fuel or tune issues. currently making 245rwkw and soon to be 300.

speak to PJ on this forum, i got them down thru him.

I was going to get the 80lb Siemen deka they're like $380 for the set.... Are they actually any good ??

You will be hard pressed to find injectors that don't require spacers to fit. Spacers are not really an issue, although mine came a little close to hitting the plenum. But I believe the Siemens injectors require different plugs to be fitted as the stock ones are oval and the Siemens are square. Or something along those lines, either way it didn't sound like a big issue either. My tuner simply told me to stay away from them so I did, but there's plenty of people on here who seem to be using them successfully with no issues.

Deatchwerks plug in with no mods, no rewiring needed.

and there cheap too!

More info to use.......Currently making 250rwkw with a GCG highflow on 17.5psi on stock injectors + all supp. mods and according the my greddy informeter I hooked up there maxing out and reach 100% duty cycle at about 6500rpm just before redline . But I never take it all the way so i'm fine with it :P

Siemens Deka 60lb high impedance short EV1 injectors on ebay usa for $279.95 - seller lpfdistributors. Doesnt say its top feed but looks like it is- cant post link here from iphone. Looks short enough not to require spacer kit so i assume just plug connectors required.

Is this the best deal around for R34 GTT injectors????

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...