Jump to content
SAU Community

Recommended Posts

Nope. But your answer is very random, like you just rolled a dice and it said 'timing'.

You're going I need to fault find and give us more information if you even want a slight guess from anyone here.

You didn't even have the decency to list any mods.

Is he running a t88, rb34 stroker, NOS and twin rear mounted secondary turbos?

Edited by The Mafia
Link to comment
https://www.sau.com.au/forums/topic/384728-r34-gtt-issue/#findComment-6137116
Share on other sites

Will do, bsa. Mafia if he had all them mods dont u think i would have told him to get the service done were all the other work was done? Its a stocker with a front mount cooler and full exhaust, happy trolling?

Link to comment
https://www.sau.com.au/forums/topic/384728-r34-gtt-issue/#findComment-6137121
Share on other sites

Pull the plugs out re gap to .8 or .9 is he running stock boost? Also check all loom plugs are connected properly. If that still don't work check piping for rags most unlikely but never trust some one unless you know they are capable on rb engines they can be sensitive

Link to comment
https://www.sau.com.au/forums/topic/384728-r34-gtt-issue/#findComment-6137128
Share on other sites

did your mate change ignition coils as a part of his 100kkm service? R34 RB25 Neo coils are known to start dying at just about this milage. And they don't usually cease working completely, they may work okay under very light loads, at idle etc, but start causing missfires under heavier loads, i.e. on boost. It usually feels like soft rev limiter has been hit, it also sounds funny. And vibrates.

Link to comment
https://www.sau.com.au/forums/topic/384728-r34-gtt-issue/#findComment-6137181
Share on other sites

Even the small mods youve listed can cause issues. Plus, you haven't said why the car was at the mechanical shop, and what the intentions where of the mehanic.

Keep calling me a troll, I'll start calling you an uninformative dickead with an attitude, that expects us to look into a crystal ball and just magically come up with an answer, with very little to almost no information.

When you post an issue on skylines Australia, you post your mods, and the most obvious thing - what was changed before and after the issue.

We can't just guess.

Link to comment
https://www.sau.com.au/forums/topic/384728-r34-gtt-issue/#findComment-6137183
Share on other sites

Troll, well ye that seems something to look at legion ill let him know, mafia honestly its hard enough trying to get simple answers but u take it to the next level people are hesitating to ask questions coz assholes like u embaress them im not really switched on about this topic hence my questions no need to scream out loud that im uninformed ur an asshole full stop troll

Link to comment
https://www.sau.com.au/forums/topic/384728-r34-gtt-issue/#findComment-6137397
Share on other sites

Troll, well ye that seems something to look at legion ill let him know, mafia honestly its hard enough trying to get simple answers but u take it to the next level people are hesitating to ask questions coz assholes like u embaress them im not really switched on about this topic hence my questions no need to scream out loud that im uninformed ur an asshole full stop troll

lol you can forget about getting help on this forum with that attitude

Link to comment
https://www.sau.com.au/forums/topic/384728-r34-gtt-issue/#findComment-6137495
Share on other sites

My second post was perfectly valid. Wasn't smart, I was just making a simple point.

But you want to be an uninformative dickhead and blame your ignorance and arrogance someone else - me.

I wasn't trolling, as I said I was making a point. We need to know what has been done to the car, who, how, when, why, etc or we are just wasting our time guessing.

Anyway I say it again, you're an arrogant uninformative dickhead and gave us scraps to work with and then proceeded to call me a troll when I pointed out your lack of info.

Wanker - eat a dick, and go to ns.com

Link to comment
https://www.sau.com.au/forums/topic/384728-r34-gtt-issue/#findComment-6137778
Share on other sites

My second post was perfectly valid. Wasn't smart, I was just making a simple point.

But you want to be an uninformative dickhead and blame your ignorance and arrogance someone else - me.

I wasn't trolling, as I said I was making a point. We need to know what has been done to the car, who, how, when, why, etc or we are just wasting our time guessing.

Anyway I say it again, you're an arrogant uninformative dickhead and gave us scraps to work with and then proceeded to call me a troll when I pointed out your lack of info.

Wanker - eat a dick, and go to ns.com

no worse then this forum mate lol

Link to comment
https://www.sau.com.au/forums/topic/384728-r34-gtt-issue/#findComment-6138065
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I’m here solo don’t have any hands to help so haven’t hit it with a timing light 
    • When you crank your car, and hit it with a timing light, can you see a steady crank timing?
    • Oh, forgot to add, A few months ago I was getting mixture codes and the car was using crap loads of fuel. You could smell the unburned fuel in the exhaust, it was crazy strong. Economy was over 17.5 l/100 and usually around 19. I smoked the engine and found a leaky CCV hose which I replaced and then I replaced my two pre cat O2 sensors, I also replaced the MAF. This fixed my mixture codes and improved my exonomy but I'm still 14 - 15 l/100 when pottering about town so something is still amiss. Throttle response is much better and it has more pep but I'd like to know why it's still so thirsty (and I'm hoping that whatever it is gives me a bit more poke).    
    • Car is on factory injectors/z32 maf/ q45 throttle body/ z32 ecu with nistune 
    • Hello all, currently finishing up a rb25 swap into my s14. Having issues with starting, car has spark (confirmed by pulling a plug and watching it spark), has fuel(confirmed by checking pulse/voltage at injectors all spark plugs are soaked in fuel). Car cranks over and pops into the exhaust with a heavy fuel smell but no attempt to start or run, I have torn the timing cover off and triple confirmed timing, turned the CAS in multiple spots both directions, attempted to start with coolant temp and maf unplugged, checked my fuel lines and made sure they weren’t backwards, checked voltage at cas/injectors/coilpacks, made sure all the grounds in the harness are connected and added a few grounding straps (1 from chassis to block, 1 from chassis to head, and 1 from chassis to igniter chip) I am getting stumped here. As a last ditch effort I made a full grounding harness tonight that’s going to run from the battery and add an extra ground from the battery onto the coil pack harness/igniter chip/ intake manifold/ Wiring specialties harness ground/ and alternator. I’m hoping maybe the grounding harness will fix it here but posting here to see if anyone has any other ideas on what else I can check. My fuel pressure is unknown right gauge will be here tomorrow.  IMG_3206.mov
×
×
  • Create New...