Jump to content
SAU Community

Recommended Posts

Always a fun and rewarding experience fixing up a car to get it just the way you like. And nice number plates Bob what colour and type did you end up going with ? I recently got new plates for my 32 as well i find they look fantastic with the overall colour of the car.post-90874-0-27178800-1332072130_thumb.jpg

Thanks Guys,

Here are the plates... I wanted 5 digit plates so I could trim them down to fit inside the JDM holders. Old style Black with white lettering. One off fee plus $90.00 per year.

As we all know, the normal plates are 7 mm too wide but if you trim too far you start going close to touching one of the digits.

In the old days, 5 digit plates were narrower than 6. That's not the case today. All plates are 372mm wide, they just space out the digits further. You can see how much extra room is available for trimming at the ends.......

I have some NOS Altrex (old Style) 5 digit plate holders which I'll use and just trim down the plates to fit. This way, the plates and holders will fit perfectly into the number plate fixing cavity.

Should be a good fit. I'll post them up once done.

Cheers,

Bob.

post-78207-0-82879800-1332099819_thumb.jpg

  • Replies 115
  • Created
  • Last Reply

Top Posters In This Topic

Really nice looking plates Bob. With mine I only had to use a rubber mallet to slightly smack in the sides of the plate and they just barely fit in the rear. For the front I just made up a bracket to bring them forward a little. I wanted to avoid having to cut them so I can refit them to a Honda civic one day :P

I don't understand getting plates that just re-iterate what's already written on the car in three or four other places ie the badges.

You would get a fine if the boys from the chaser saw it..

Thanks Guys,

Here are the plates... I wanted 5 digit plates so I could trim them down to fit inside the JDM holders. Old style Black with white lettering. One off fee plus $90.00 per year.

As we all know, the normal plates are 7 mm too wide but if you trim too far you start going close to touching one of the digits.

In the old days, 5 digit plates were narrower than 6. That's not the case today. All plates are 372mm wide, they just space out the digits further. You can see how much extra room is available for trimming at the ends.......

I have some NOS Altrex (old Style) 5 digit plate holders which I'll use and just trim down the plates to fit. This way, the plates and holders will fit perfectly into the number plate fixing cavity.

Should be a good fit. I'll post them up once done.

Cheers,

Bob.

Update.........

My plates arrived and I collected them yesterday.

The RTA website is wrong......... 5 digit plates are still the narrower version so no trimming is required. I think they look the best on a 20 year old car.

Cheers,

Bob.

post-78207-0-57746700-1332671396_thumb.jpg

Nice one Bob. Obviously even for the hundreds we pay to MyPlates every year they still can't render the preview properly to give you an accurate representation of what you're getting.

My plates arrived looking more like a mustard colour but were supposed to be "gold". Fortunately I don't mind the look.

Nice one Bob. Obviously even for the hundreds we pay to MyPlates every year they still can't render the preview properly to give you an accurate representation of what you're getting.

My plates arrived looking more like a mustard colour but were supposed to be "gold". Fortunately I don't mind the look.

Funny you say that...... My black and white plates look Dark Grey and White on some angles. :blink: :blink:

Bob.

Yeah but without any competition my plates can do whatever the puck they want and still make money for old rope, I'm not saying badge plates are wanker plates, that would be ironic seeing how wanky mine must look to some people but I just dont get it.'

To each his own is correct but just curious about the thought process behind it as its different from mine.':)

  • 5 weeks later...

You little boys and your toys. If you don't have any mechanical knowledge at all or have only driven a hyundai before you'll never know what to look for in a high"ish" performance machine when purchasing. There are so many systems on a 20 year old gtr to consider. Don't get one from Blacktown for starters! Come on man use ya brain. Import from those tidy little bastards over there. Un-molested,clean and hopefully rust free. They ARE an old car but,shit, for just over 20k your gonna smash any other ride that could pick up for that $$. Use your melon and be patient. Stay away from s**t that's been "rebuilt". Your getting into trouble straight away unless NISMO built it!! And leave the thing alone unless you are a mechanic stop doing the dodgy s**t to these cars if ya don't know what ya doing!!! Don't get one if ya don't have some $$ in the bank either, they aint cheap to maintain properly with good quality gear. STOP DREAMING!!!

I'm currently looking for a 32 GTR for da womenz and ur indafo waaaz really helpful braa!$&

Jks your a f u c k i n g retard kent. Are you f**king joking or what c u n t this bloke owns a Australian delivered GTR he isn't dreaming you loser.

just for some perspective i recently picked up my JDM 32 gtr for $15800 78267 kms on the original cluster with all aussie history bought it off the first aussie owner needs a few small things (badges door trims replaced few small scratches replace front intercooler mesh)but appart from that its performing very well ate putty road for breakfast the other day :)

You little boys and your toys. If you don't have any mechanical knowledge at all or have only driven a hyundai before you'll never know what to look for in a high"ish" performance machine when purchasing. There are so many systems on a 20 year old gtr to consider. Don't get one from Blacktown for starters! Come on man use ya brain. Import from those tidy little bastards over there. Un-molested,clean and hopefully rust free. They ARE an old car but,shit, for just over 20k your gonna smash any other ride that could pick up for that $$. Use your melon and be patient. Stay away from s**t that's been "rebuilt". Your getting into trouble straight away unless NISMO built it!! And leave the thing alone unless you are a mechanic stop doing the dodgy s**t to these cars if ya don't know what ya doing!!! Don't get one if ya don't have some $$ in the bank either, they aint cheap to maintain properly with good quality gear. STOP DREAMING!!!

I think there is some good perspective in your bitch comments, but "little boys and their toys"...? and "Dreaming" ? ( You got a face slap or limp wrist to go with that?) Makes me think youve been on Oxford Street for some time "dreaming" about "little boys and their toys"...more so than any good info you have about cars.... If you want to be real, Id agree cars cost money, nothing is cheep or perfect, so thanks for stating the obvious. These threads are for ppl to share ideas and info, stating the obvious really isnt helpful especially with your Bitch attitude/nature. Stick to your boys and their toys and stay away from cars would be my advice to you, then again, guess im also stating the obvious...

Edited by nathanau

To be honest with you I couldn't really understand what this jibberer was on about!

Anyway........As is already documented within this topic, I've bought a JDM R32 GT-R which I'm restoring to a reasonably high standard. It's at my trimmers until tomorrow and the goes into the panel shop on Monday to have a fair bit done.

I intend to post up before and after pics plus a direct comparison with the ADM.

Cheers,

Bob.

just for some perspective i recently picked up my JDM 32 gtr for $15800 78267 kms on the original cluster with all aussie history bought it off the first aussie owner needs a few small things (badges door trims replaced few small scratches replace front intercooler mesh)but appart from that its performing very well ate putty road for breakfast the other day :)

Congrats on your buy Braden, as well as Bob. :yes:

It's a buyers' market atm - sign of the times - lean 'n mean

Congrats on your buy Braden, as well as Bob. :yes:

It's a buyers' market atm - sign of the times - lean 'n mean

Thanks Terry,

Got my car back from my motor trimmers on Friday and I'm thrilled with his work.

Here are a few pics from today at Sydney Dragway.......

post-78207-0-37158300-1335685917_thumb.jpg

post-78207-0-16699800-1335685923_thumb.jpg

post-78207-0-53345200-1335685929_thumb.jpg

post-78207-0-39885400-1335685936_thumb.jpg

post-78207-0-22272900-1335685943_thumb.jpg

post-78207-0-32603400-1335685949_thumb.jpg

post-78207-0-81673600-1335685955_thumb.jpg

post-78207-0-35018900-1335685962_thumb.jpg

post-78207-0-82240200-1335685968_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...