Jump to content
SAU Community

Recommended Posts

For those who may find this interesting, here is a copy of a post I made in the Skyline Specific section covering ADM's.

Hi Guys,

Here are a few more direct comparisons. I was at Sydney Dragway today and a mate of mine with an ADM parked next to my JDM. I was going to do this comparison with my ADM but having his car there I thought I'd post up a pic or two.

As previously posted, you can see the rear tail light configuration is different.

The ADM gets vinyl sun visors as opposed to the JDM which gets velour covered ones.

Skyline badge on the bonnet vs Nissan badge.

The ADM gets factory fitted 300ZX side blinkers, JDM gets generic Bosch or Mitsubishi blinkers.

ADM gets High/Low dimmer switch, JDM gets fog light switch.

As also stated before, ADM gets Blaupunct/Bosch Auto Flex centre roof aerial.

There are many more changes that I'll document one I guess a chance.

Cheers,

Bob.

post-78207-0-93082400-1335686345_thumb.jpg

post-78207-0-03306700-1335686353_thumb.jpg

post-78207-0-72739800-1335686359_thumb.jpg

post-78207-0-80143500-1335686365_thumb.jpg

post-78207-0-92609200-1335686371_thumb.jpg

post-78207-0-81565100-1335686378_thumb.jpg

post-78207-0-90683300-1335686385_thumb.jpg

post-78207-0-22581600-1335686392_thumb.jpg

post-78207-0-48312200-1335686402_thumb.jpg

post-78207-0-81651500-1335686408_thumb.jpg

  • Replies 115
  • Created
  • Last Reply

Top Posters In This Topic

  • 3 weeks later...

Hi Guys,

Just thought I'd post a bit of an update with some pics.......

The trim and bodywork is pretty much completed all bar a bit of touch up stuff.

I'd say we are 95% of the way there but there are always things that could be improved.

Cheers,

Bob.

post-78207-0-49304300-1337491185_thumb.jpg

post-78207-0-51028700-1337491192_thumb.jpg

post-78207-0-20948100-1337491243_thumb.jpg

post-78207-0-57800600-1337491249_thumb.jpg

post-78207-0-16295500-1337491256_thumb.jpg

post-78207-0-28881000-1337491263_thumb.jpg

post-78207-0-10806400-1337491270_thumb.jpg

post-78207-0-75345700-1337491343_thumb.jpg

post-78207-0-93755000-1337491350_thumb.jpg

post-78207-0-29811000-1337491358_thumb.jpg

post-78207-0-53502000-1337491441_thumb.jpg

post-78207-0-20049300-1337491448_thumb.jpg

post-78207-0-44237300-1337491455_thumb.jpg

post-78207-0-29365500-1337491462_thumb.jpg

post-78207-0-54265900-1337491468_thumb.jpg

post-78207-0-87802100-1337491474_thumb.jpg

  • 2 weeks later...

Ey mate I know your after a 32 but just to let you know there is a stock midnight purple r33 v-spec listed yesterday for $16,300. I recognized it and remembered it was listed not so long ago for $19000 in Newcastle. Which I messaged him and confirmed. So it's a bargain but just be cautious.. Too soon to be reselling but definately worth a look!!! Cheap cheap.

Looks very clean in those pics inside & outside, shame on the bubble in the dash other than that it looks very neat & tidy.

You've done a great job.

LOL........ Replacement NON BUBBLE dash going in tomorrow afternoon.........

Bob. :yes: :yes: :yes:

LOL........ Replacement NON BUBBLE dash going in tomorrow afternoon.........

Bob. :yes: :yes: :yes:

http://www.skylinesaustralia.com/forums/topic/401608-replacement-dash-fitted-today/

I guess you've just about achieved what you wanted with this car, great job Bob.

Nearly........

I'm just looking at a few fabric dying options as the front seats are still not quite in a condition that I want and then a decent security system and THAT'S IT!

Went and saw Daniel at Carbon Car Systems at Blacktown on Saturday and settled on a premium Viper system.

June 30 was always going to be my deadline........ I must admit I'm so sick of forking out money every month restoring this poor thing. The budget is blown and what I've done in 4 months most people would do in 2 years so it is rather stressful.........

Bob.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So, I've had my V36 for about a month now and have already copped an "excessive exhaust noise" notification from QLD TMR, reported by someone in my local area. It's a twin as per the original, and can have a bit of a throaty note to it when idling cold 😄 and if I do get up it a bit, it can be noisy, but it did pass a roadworthy inspection before sale, so.... ... but in the interest of being a good neighbour, I do want to quieten it down a bit. Is anyone here running a quiet aftermarket cat-back on their V36 or 370Z? And the big, bold question: does an aftermarket cat-back really make much of a performance difference on these cars?
    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
    • Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
×
×
  • Create New...