Jump to content
SAU Community

Need Grounding Kit Installation Manual

Deep Dish V35
 Share

Recommended Posts

Deep Dish V35 Experienced

Deep Dish V35

Posted
Posted (edited)

im assuming that the guy who originally put the grounding kit on my car did it incorrectly as the gear changes just take for-bloody-ever. if anyone can point me to a guide for the proper bolting locations for this kit, itd be appreciated.

i didnt realise how lethargic the nissan auto was untili drove the boxster this week..

ta

Edited by Deep Dish V35
Nightcrawler Grand Master

Nightcrawler

Posted
Posted

The grounding kits do ABSOLUTELY NOTHING. Don't listen to a word anyone says if they say they do. I have put them on 3 of my previous cars and my V35 just in case they actually did something, but they don't.

And seriously, you are comparing a new (presumably dual clutch pack) $100k+ Porsche gearbox to an 8 year old V35 gearbox? WTF?

sonicii Veteran

sonicii

Posted
Posted

I have always wondered about the effectivness of grounding kits. I put one on my old J30 maxima years ago, and it did absolutly nothing. At the time I figured it was just a money making scheme for those who were too lazy to clean their factory ground points, and since I always kept connectors and ground points clean, it didn't do anyting for me.

Deep Dish V35 Experienced

Deep Dish V35

Posted
  • Author
Posted

my car comparison was simply from a point of selecting a gear in the V35 and then waiting multiple seconds for anything to happen. i have to select at 4000rpm so that it shifts by the time it gets to 6500rpm....,

its just that when driving our 2008 porsche, tiptronic is worlds apart in effectiveness. not so much the shift speed, but the shift delay..

sonicii Veteran

sonicii

Posted
Posted

And seriously, you are comparing a new (presumably dual clutch pack) $100k+ Porsche gearbox to an 8 year old V35 gearbox? WTF?

Does the boxster have a DSG? If so, then it is very unfair to compare it to any standard auto.. not just the V35 RE5.

Alkatraz Rising Star

Alkatraz

Posted
Posted (edited)

The grounding kits do ABSOLUTELY NOTHING. Don't listen to a word anyone says if they say they do. I have put them on 3 of my previous cars and my V35 just in case they actually did something, but they don't.

I have to disagree, I put one on my V36 a while ago and it definitely sped up the speed of the down changes through the paddles. If it makes any difference to power (which I doubt), it would never be enough to be noticeable and it didn't seem to make any difference to the up changes. One other thing that I have noticed is that it doesn't seem to hunt for gears as much when driving in traffic, in full automatic, previously the box seemed to take a little while to decide which gear it wanted and would sometimes stay in a lower gear for too long. This simply makes it feel a little less jerky when putting around at low speed.

If you believe that they do absolutely zero, then that's fine, but I have noticed a definite difference. Now whether it was worth the $80 or whatever it was, is another question.

Edited by Alkatraz
zei20l Grand Master

zei20l

Posted
Posted

my car comparison was simply from a point of selecting a gear in the V35 and then waiting multiple seconds for anything to happen. i have to select at 4000rpm so that it shifts by the time it gets to 6500rpm....,

its just that when driving our 2008 porsche, tiptronic is worlds apart in effectiveness. not so much the shift speed, but the shift delay..

you need a shift kit, at 4000 when you shift, the trans will shift at around 4200 or less

Deep Dish V35 Experienced

Deep Dish V35

Posted
  • Author
Posted

its not a shift kit thing. its something electrical. maybe even something in the computer that could be reprogrammed with the right scantool. i dont want it to throw itself into the mext gear and chirp the wheels, just begin the gearchange process when i push the selector.

looks like i'll have to post a video of how long it waits before changing gears. i can literally push the selector, turn the volume up on my radio, then put my hand back on the steering wheel before it does anything at all.

zei20l Grand Master

zei20l

Posted
Posted

they all do it, they are programmed to be sluggish.

mine did the same thing also.

also the position of the throttle makes a difference. if you full throttle the car, no matter where you select to change gear, it will change at redline (or close to it) again, another programming thing by the TCU

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Duncan
      What brakes on R34 GTT(Europe)

      By Duncan · Posted

      Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
    • 04-LOOX
      R34 GTR Vspec Garage Sale - All must go!

      By 04-LOOX · Posted

      Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
×
×
  • Create New...