Jump to content
SAU Community

Recommended Posts

May sound like a silly question,

I'll be towing my car on a car trailer for the first time next week and need some advice on how to tie the car down, eg. where do i tie down? the diff? each wheel? all 4 wheels? chains or truck tie down ok?

Link to comment
https://www.sau.com.au/forums/topic/386869-towing-a-car-on-a-trailer/
Share on other sites

where you tie it down sort of depends on the trailer and where the points are to tie it down. my opinion is to tie it down via parts of the car connected to the lower part of the suspension that aren't going to move too much if the suspension is compressed. for example, if you were to tie it down via the body somewhere, if you hit a big bump then the suspension of the car can compress and the chains/tie-downs can slacken and the car can move. but as i said, it comes down to where the points are on the trailer to tie down to.

also make sure that you have the car foward all the way so you have most of the weight over the front of the trailer. this will make it tow better. having too much weight over the back of the trailer is a good way to cause an accident once you pick up a bit of speed.

Thanks for the tips, im hoping that 4 ratchet tiedowns ( 1500kg rated each ) is enough around the lower suspension on each corner then, i think the tow trucks use chains and winches but ill be driving steady , its a 30min drive and the front of the trailer has a wire that hooks onto the tow hook, and the trailer has brakes . The trailer says its rated at 1200kg, do you guys see any problem if the skyline is 1400kg?

Do you guys think there is any issues with this setup? i know i could of just got a tow truck but it would be alot more expensive.

Think of the car as a tennis ball, doesn't matter which way you tilt the trailer (forward, backward, side) the tennis ball should not be able to move. Don't take any notice of how a tow truck operater secures a vehicle, 98% of them should be shot for their unsafe practices (a winch + 1 wheel tied down is not safe).

The easiest way is as Rekin has posted, using each wheel diagonally to the corner of the trailer. This prevents forward, backward and side movement but can play havoc on alignments.

Use 'hooker & keeper' 50mm ratchets which you can get a 4 pack from bunnings for about $50 rated to 1-2 ton. The amount of retards I see at motorsport events use 1x 20mm s-hook looped through the front axle and another looped through the back axle is astonishing. Most importantly is to tie it all down, then do a lap of the trailer to re-check each point then drive the car 50 or 100m and brake then get out and check it all again.

Just make sure your hand brake is on and the car is in the gear that you value the least. Chuck a mate in there to hold the brakes on and turn the wheel for a bit of extra friction for security.

Make sure it can't move by tying it on as said (I'd also have the winch tightened if you can) and then take it a bit easy, towing a trailer with a car on it isn't hard if you use your brain, let people overtake you and if the trailer gets unsettled don't smash your brakes, pump them once and power out.

Thanks guys for all the good advice,

Towed the car to ERD this morning, ended up using 3 tie downs and had my bro follow behind me in his car just to make sure it was ok, first time towing was a bit anxious lol, but was suprisingly smooth ride,

the car didnt move at all on the trailer and was solid, the EL falcon got a work out.. i can see why people use 4wd's to tow there drag cars.. the temp guage was sitting high and the brakes became shakey by the end.

Cheers :thumbsup:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
    • I got adjustable after market rear camber arm to replace the stock one's because got sick of having to buy new rear tyres every few months. Can anyone please let me know what the best adjustment length would be. I don't have the old ones anymore to get measurements. I'm guessing the stock measurement minus a few mm would do it. Please any help on replacing them would be fantastic I've watched the YouTube clips but no-one talks about how long to set the camber arm to.
    • Heh. I copied the link to the video direct, instead of the thread I mentioned. But the video is the main value content anyway. Otherwise, yes, in Europe, surely you'd be expected to buy local. Being whichever flavour of Michelin, Continental or Pirelli suits your usage model.
×
×
  • Create New...