Jump to content
SAU Community

Recommended Posts

Hey guys,

Looking at buying another car which is a bit more street friendly but one that can also tow my r33 when I take it to the track.

I've been looking up stageas because there are some sub 10k which is in my price range..

Obviously id put a trans cooler and other bits and pieces to aid in towing but I'm looking at any first hand experiences in towing cars with one...

Thank for any input

Link to comment
https://www.sau.com.au/forums/topic/387208-towing-a-car-with-a-stagea/
Share on other sites

Sydney Kid is the one to look up. He tows his track car with a Stag, or did? Getting a towbar can be a pain. Actually found a Patrol the best option. That is used to tow the Sil

I used my stag to tow a car trailer on the odd occasion, and it towed my boat a fair bit. I didn't really like it. Not enough power so it kept changing gears every 2 secs up hill.

That's partly the reason I sold it, it can tow of required, but as a dedicated tow car, I'd look elsewhere.

It was a series 2 auto(neo motor) It had 3" turbo back exhaust, pod and 12psi, shift kit and sway bars.

It's more that it lacked torque, ie on boost up hills, all good

Off boost, slight rise in the road, gutless, down change a gear :(

I found that unless I was towing on the flat above 100k I'd just hold it in 3rd gear

The rear end felt fair average with the boat on it. Not ver heavy, ie 950kg on the trailer with spare fuel and ski gear, but the long ass trailer made the back end feel like poo

I've towed a few times with mine (rs4s), my only complaint is my excedy heavy duty slipped when accelerating ocassionally up hills. But I would deffinately recommend a brake upgrade just as a safety concern. Emergency stops are not possible. But my previous tow cars have been a 2002 Camry, 1976 corona, 97 surf, 89 falcon, 2000 hilux 2wd. The stagea towed better then those.

Just for information my mods were as follows. 3inch exhaust, front mount, k&n panel filter, split fire coils and the clutch.

as mentioned above, getting a towbar can be a pain. there is a guy in canberra who made one up rated by him to 2.0 tonne. don't confuse this with being engineered to 2.0 tonne you have to get it engineered urself to make it completely legal. however do your research as i bought one of these on recommendation of many SAU members and found it didn't allign at all with the back of my car. The installer up here did tell me though that once they got my rear bumper off there is evidence that my car has been in a accident (which i didn't know when i bought it) and was also told same thing by the tyre shop when they tried to do an allignment, so now i'm out $800 odd for a towbar that won't work on my car. So by research i mean no rear damage repaired or otherwise to the stagea you buy. Also alot of places won't fit second hand towbars, or ones that are made by someone else, or be willing to design one for you.

I tow a fair bit with my stagea and other than terrible fuel economy it is excellent.

All I had to change to make it tow well was:

Much harder and higher rear shocks

Big brakes

Big wheels to clear the big brakes

Rb30 with 25 head

High mount turbo

Front mount intercooler and forward facing plenum

PowerFC

GTR injector conversion

2t tow bar from Max in canberra (mine fit the chassis but required heaps of work trimming the dayz kit)

Also did a manual conversion but I don't think that helped it's towing ability, it is a bit of a pain to pull away from standing starts.

So....for irregular towing I would say go for it....but for regular towing of big loads a lot of work and money is required to work well.

Having said all that, I am very happy with how the car ended up. It is a daily car with occasional (1-2/month) towing of large loads (up to 2.5 tonnes) over long distances. When towing it is dead steady, brakes are great and plenty of power whenever it is needed. The only issue is the fuel economy is terrible when towing.

2t tow bar from Max in canberra (mine fit the chassis but required heaps of work trimming the dayz kit)

i have a mate that works in the industry that deals with hayman reese at good prices inc supply and fit, im sorting out a group buy for the WA boys atm.

Yep, just like my new ride

1989 chev silverado

350 chev, injected, auto, 1500kg in the tray, up to 3000kg on the tow bar.

Doesn't turn, doesn't stop, and it doesn't go fast, but it tows!

  • 3 weeks later...

Anyone have any experience towing with an M35 Stagea by any chance?

Ive been advised that you would (of course) have to get one custom made for the M35, but anyone know where to start in VIC? or is any have been made up in other states?

I am only looking at a tow weight of possibly 1.5-1.6 Tonne max, just a stripped out z20 drifter + trailer, so might not even be that heavy in total

Cheers

Ken

ive researched it to be something like 1.6 tonne safely? (according to wiki and car sales :P)

any chance you'd roughly know how much it would set someone back to get a custom one made up dirtyRS4?

even if its for a c34 id at least know a rough price range :P

cheers

Ken

  • 7 months later...

Not sure if your stil looking at this but these guys do them http://www.wynnumtowbars.com.au/Wynnum/Towbars.html but there in Qld... Im considering getting one done for a boat weighing 500kg gross payload.... Surely got to be better than trying to tow with the Mrs corolla...

  • 6 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...