Jump to content
SAU Community

Recommended Posts

Already said, but a new DE Motor are as cheap as they come now. Even a DE NEO can be had for under $1k at times.

Stock air box is the best way to go on an N/A Skyline. I'm not entirely sure with the R33 without looking for a pic, but the air feed on the N/A R34's is better than most custom set ups for an N/A.

A K&N Panel in the stock box, with a cold air feed going into the box if necessary, is going to be more than ample. An N/A Skyline isn't going to surpass the capability of a K&N Panel.

  • 2 weeks later...

When i removed my panel filter and installed my stainless intake pipe i noticed a bit of oil gathering inside it. + 1 for the catch can bro, but extend your piping into the empty space where the snorkel would have feed down into.

  • 5 weeks later...

With the tutorial on moving your CAI to behind the front bumper, I have a few questions.

1. Wont water collect in it being so low and un protected?

2. will it collect a lot of dust being low?

well i guess you could say why bother with a skyline of any type whilst a full time student etc, but yeah i'd be leaning towards the new motor option, the n/a rb25 is worth about as much as an rb30 lol

where r these cheap nas for the price of an rb30,

Already said, but a new DE Motor are as cheap as they come now. Even a DE NEO can be had for under $1k at times.

Stock air box is the best way to go on an N/A Skyline. I'm not entirely sure with the R33 without looking for a pic, but the air feed on the N/A R34's is better than most custom set ups for an N/A.

A K&N Panel in the stock box, with a cold air feed going into the box if necessary, is going to be more than ample. An N/A Skyline isn't going to surpass the capability of a K&N Panel.

+1

IMHO - The K&N or any quality high flow panel filter will be more than good enough. Even on a lightly modded turbo model the highflow panel filter will still be more than enough.

I was a student when I bought my R34. Panel filter and a high flow cat gave it a bit more perk in the mid to high range. No difference in the low end.

So what gave the idea to my previous owner of the N/A rb25 to put a POD filter on it?

I'm guessing little knowledge... Don't know.

One thing to keep in mind is Nissan engineers (any car manufacturer) that work on power trains have unlimited dyno time and are highly trained/educated. Joe Blow thinks a pod filter is better and bolts it on....

Funny thing is pod filters are actually cheaper than all the complex piping and airbox systems.... So why would Nissan bother putting such an expensive and complex setup if it was crap in the 1st place....

  • 4 months later...

My mechanic told me that Iv'e got an oil leak problem with my engine and the cost effective preventative measure against any possible damage was to install the catch can. I'm not 100% on what the exact problem is aside from being told that I'll have to rebuild most of the engine /sigh.

Pump like 3 bottles of or wynns engine oil stop leak into that sucker :yes:

Edited by Keith w

I'm guessing little knowledge... Don't know.

One thing to keep in mind is Nissan engineers (any car manufacturer) that work on power trains have unlimited dyno time and are highly trained/educated. Joe Blow thinks a pod filter is better and bolts it on....

Funny thing is pod filters are actually cheaper than all the complex piping and airbox systems.... So why would Nissan bother putting such an expensive and complex setup if it was crap in the 1st place....

Same reason they put all those resonators on there, induction noise (although the resonators also allow any "extra" air in the intake somewhere to go when you step off the throttle).

Why did Ford put a large pod on the supercharged V8 GT? My guess is they needed a shit load of air going in there and didn't have the space for a massive panel filter.

Same reason they put all those resonators on there, induction noise (although the resonators also allow any "extra" air in the intake somewhere to go when you step off the throttle). Why did Ford put a large pod on the supercharged V8 GT? My guess is they needed a shit load of air going in there and didn't have the space for a massive panel filter.

Very very different cars from factory, can't really compare them. You're talking a 335kw V8 compared to a ~180kw straight 6. Ford also designed it to work properly with a good heat shield and a cold air intake, something that most people who bolt on a pod filter don't bother doing.

Actually I wasn't comparing engines, just stating that pods are quite useful if implemented correctly... and that they can be a requirement when a panel filter is not up to the task. In the end, the engine will only take as much air it needs so no harm in getting the largest filter you can.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thank you GTSBoy and MBS206 I have done the compression test with the motor out of the vehicle, reason for the test was to see if I needed to remove the head and do rings etc while its out. I'm in the process of respraying the vehicle and tidying up a few things. Story behind it all is I've just purchased the skyline and it was running when I got it, never drove it on the street though as I wanted to pull it down and do it all up again before registering it. the gentleman I purchased it from told me the motor has a forged bottom end and has a decent tune through it but I was going to pull the sump off anyway to see if it is a forged bottom end. that's why I thought id do a compression test beforehand. 
    • Man, I'm kind of amazed that the price of the turbo has not changed in 7 years. Everything else is inflating beyond reason, but not this? Good on Tao / hypergear I guess? Anyways, good luck with the sale!
    • I'm selling my brand new, in the box, never used Hypergear ATR45 - and I had some additions I paid for a few yrs back when I purchased it. Never ended up having the rest of the money to add all the mods at once, so I just ended up slowly selling each part. I originally had it internally gated, with the dump pipe, however I found it was incompatible with what I was going to use it for, so I contacted (I think Ken) from Hypergear, and he and I messaged back and forth & he got me to ship the turbo back, where they modified it & made it externally gated, and gave me the 5 bolt dump pipe attachment for custom welding. (Photos below) This turbo like I said has never touched the inside of an engine bay, it's completely brand new, never used, been sitting in the same box it arrived in, covered in plastic & all. Below are the photos of it: And while the guys at Hypergear were making it in-shop, they sent me some photos of the process: I'm looking at selling this just because I'm in need of the money right now, and don't have plans on modifying the 34 anytime soon - and from reviews & peformance sheets, this turbo had amazing results back when I was researching. The turbo was purchased in 2018 for $1.9k, with the mods I got added on. Looking at the website now, for the same turbo they sell (ATR45SAT), with the current addons it adds up to $1830 for the turbo Current addons included: - Bolted dump adaptor - Ball bearing CHRA - Braided oil feeding line So I'm looking to possibly sell it for around $1800, with shipping included in that 1.8k, It cost me around $120 to ship - so yeah thought I'd throw it out there and see if anyone was interested in purchasing. Cheers!
    • Turn up your speakers https://youtu.be/5_GK5ChNjOs?feature=shared
×
×
  • Create New...