Jump to content
SAU Community

Recommended Posts

Hello all,

I would like to share some pics of my new rims. They're 18x8 and made by Rays Engineering for Payton's Place. I bought them off the Yahoo Auctions in Japan thru J-Spec. J-Spec have also sourced me some Tein coil overs which should be here soon allowing me to put the car on its arse :)

The tyres are Hankook Ventus K104s (235/40/18f, 255/35/18r). The reason for the Hankooks goes a little like this; I was sold by the fact that they have the same traction rating (AA), same heat rating (A), and better wear rating (280 vs 220) when compared to the Michellin Pilot Sports. The best part is they're almost half the price!

Let me know what you think :D

wheels1800.jpg

rays.jpg

Link to comment
https://www.sau.com.au/forums/topic/38737-new-wheels-are-on-the-car/
Share on other sites

  • Replies 57
  • Created
  • Last Reply

Top Posters In This Topic

I was sold by the fact that they have the same traction rating (AA), same heat rating (A), and better wear rating (280 vs 220) when compared to the Michellin Pilot Sports.

I hope you realise that the higher the treadwear rating (280 vs 220), the harder the tyre it is...

The Michelin Pilot Sports are a lot softer and stickier than the Hankooks... Yours will last longer but won't have the same level of grip.

Nice wheels! :)

Nice, what did you pay?

I dont really know because I havent made the final payment :) (long story). I'm expecting around the $1300 mark. Not bad for a brand new set of 18" Ray's :D

Hope you got lock nuts.

Yep, in fact would-be thieves would have to come ultra prepared ;)

I hope you realise that the higher the tread wear rating (280 vs. 220), the harder the tyre it is...

The Michelin Pilot Sports are a lot softer and stickier than the Hankooks... Yours will last longer but won't have the same level of grip.

Nice wheels! :)

Yep, I'll pay that. But heres the deal, I had a V104K and a Pilot Sport side by side at the tyre shop. Everything about these 2 tyres was bloody similar. As I said, the traction and heat ratings are exactly the same, the tread patterns are bloody similar, and the review both tyres got in Motor (Dec 2003) is also bloody similar. That, teamed up with the fact that Michelin own 80% of Hankook, was enough for me to save the $200 odd per corner at the expense of negligible traction differences. And, as you pointed out, they'll last longer :D

you might be able to convince em to chuck the rims in the boot of the car if its still in japan. The new container we're packing should be ready ina few weeks, and then its shipping time again :D

which means all my shit will finally get here, then its widebody time :D:)

basically costs are:

cost to buy rims

cost to transport rims from seller to tokyo container packing place

taxes

then once it arrives here you pay a percentage of the total shipping cost which is broken up by how much you transported (dimensions and weight factors).

For example to ship my entire bodykit cost $400 (bodykit itslef cost $900) so for $1300 I got a brand spanking new not found in australia bodykit :D

Oh and not all Rays are expensive... :) if you know how to get em

nah i don't.... "we" was used meaning me n j-spec (coz I got some shit in there alongs with a few more stuff for a few of my friends etc). We're all good friends tho from a while back.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Probably speedometer itself if the odometer is ticking. If the needle is stuck from a bit of grease or something that can cause it to stay at 0. Or a cracked solder joint in the speedometer can do it too.
    • Thanks Fella’s   to take this off topic and to elaborate a bit more. I have an rb25/30 going into a r32 GTST.. expected to make around 600-700hp. Would you?   A) R34 GTT box   B) CD00#?  I’ve seen a few posts about the CD swap and sounds fairly involved with making it fit etc but if it’s worth the work then I’ll go that way
    • Lower at the hubs. Funny I forgot to mention that part. Do this pull here I turned the camera off too soon but the graph shows a drop at the top and that was because the pipe from the turbo blew off. The tuner said we could’ve made possibly another 15 whp. He also added if I switched to ethanol we could up the boost some more as well. I was comfortable capping it at the most of 20 pounds. Turns out the turbo pipe just needed a new worm clamp. Got home replaced that then did a third gear pull from 3k to 7200 rpm and the power was great to the top. I just got an ecu mounting bracket from IEE that I need to try and get everything to fit well. It’s a PITA to get the harness and ecu fit properly behind that kick plate 
    • He means "as opposed to mechanical cable drive". Older cars (R32 for ex.) had cable drive. Later cars with essentially the same gearbox, ie R34 GT (NA RB25) used essentially the same box as the R32 GTSt, but instead of a cable drive, had an electronic speed sender plugged into the same hole in the box, running from the same little gear that would have run the cable. Some of the shittier later cars use a speed sender on the nose of the diff, or the ABS sensors.
    • Lower than engine, or lower than it should at the hubs? Either way, that is a nice power figure and I'm not surprised you say it rips now. What stopped you from turning it up any more? Injectors? Or did it just stop responding to boost?
×
×
  • Create New...