Jump to content
SAU Community

Recommended Posts

ok so the leak sorted the boost issue... the turbos are spooling to 25-26 pounds

but the car is still struggling to make power

make 320kw on e85 with 25 pounds :( :(

Chea said he has trippled checked all the bolt ons and says everything on the outside of the motor is fine

he believes its the head... more specifically the valve springs

peak power right now is at 6300... car just starts struggling to breath and loses power

he's done a compression test on the motor said it was healthy and believes the bottom end is all good

so now we gotta change the head!

any thoughts?? does this problem sound like it would be caused by dodgy valve springs??

I dont want to spend another $2k sorting the head and then finding out there is some other issue thats going to cost me another couple of grand to fix!

What does the power graph look like? When valves go it is often very bumpy up and down, but even if it is smooth it doesn't rule it out. I've only ever really hard of this happening on rb25s not 26s though. Wait for someone with more experience to reply.

Edited by Rolls

He didn't specifically say to change the head but he is saying its the springs.. he said it might be worthwhile to change the head while you're at it

He said he is very confident that its the springs but as always they can't be 100% certain

I'll put up dyno in a sec

He didn't specifically say to change the head but he is saying its the springs.. he said it might be worthwhile to change the head while you're at it

He said he is very confident that its the springs but as always they can't be 100% certain

I'll put up dyno in a sec

Take it to Unigroup. It sounds like your tuner is guessing, Yavuz does not guess.

Best post in this thread.

I'd be out the door at "change the head while you're at it".

At least do springs first!

Best post in this thread.

I'd be out the door at "change the head while you're at it".

At least do springs first!

I might have misinterpreted him

i think he meant due to the cost involved in changing springs... it might be financially better to 'do' the head (if i wanted to) seeing as we're spending $$ on labour regardless

anyway... going to see him on Sat and see whats the next step

but prob will end up getting it to Yavuz for a 2nd opinion

in the meantime, if anyone has any insights feel free to share

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...