Jump to content
SAU Community

Recommended Posts

Hi all,

I've had my car for a few months now and there are some things which i can easily see were modified. However, I'm still not sure whether my turbo is stock or not.

It already had a manual boost controller installed and it was turned up to max boost, which boosts beyond the reaches of the stock boost gauge. I'm worried that if it's a stock turbo, the turbo can't handle the boost and will blow soon. I don't want to turn down the boost (for obvious power reasons). Are there any tell-tale signs of a stock turbo? I can't see any signs or writing on the turbo without taking it out. It seems to be a bit rusted compared to the rest of the components next to it so I'm wondering if that's normal, or some second hand or aftermarket turbo in there.

I'll put some pics up when i get a chance.

Thanks guys,

Jay-C

Link to comment
https://www.sau.com.au/forums/topic/388400-is-my-turbo-stock/
Share on other sites

Put it on a dyno and find out just how much power its making and how much boost its running.

Dyno opperator will be able to tell you if its safe or not.

If its got well over 200kw and tuner says its safe you can assume that its tuned and has an upgraded turbo, if its making around the 200 mark or less then its a stock turbo and you should turn the boost back to 12 at most.

This is if you fail at identifying what it is for yourself. You really should have asked about the cars full history when you handed over your hard earned coin....

Not sure if this helps you at all, but these are pics from the original owner of my car when the old turbo was done -

BEFORE -

post-47580-0-63749600-1326688023_thumb.jpgpost-47580-0-50440600-1326688064_thumb.jpg

AFTER -

post-47580-0-61520800-1326688119_thumb.jpgpost-47580-0-61402000-1326688154_thumb.jpg

Errrr it would appear the first AFTER image is EPIC FAIL..... Sorry >_<

Just going on the pictures, you can quite clearly see that the turbine side (exhaust wheel) is much larger and looks to be steel in the after shot. Very confident that if those pictures are of the same turbo and it is on your car, you have high flow job.

Just going on the pictures, you can quite clearly see that the turbine side (exhaust wheel) is much larger and looks to be steel in the after shot. Very confident that if those pictures are of the same turbo and it is on your car, you have high flow job.

Dude, i only posted them for an example for the guy that started the topic :cool: That turbo was off my R34......... Was trying to help!

Thanks for the responses. Yes, 34GTT i realise that post was for me to get a better idea of what it could look like. I'm not going to be taking the turbo out though so i'm hoping that i can tell just from the housing.

i guess if it says "nissan" on it, it's stock.

Thanks for the responses. Yes, 34GTT i realise that post was for me to get a better idea of what it could look like. I'm not going to be taking the turbo out though so i'm hoping that i can tell just from the housing.

i guess if it says "nissan" on it, it's stock.

No, that isnt totally correct.

You can have the stock turbo high flowed to make more power. So your turbo may LOOK stock, but the internals are far from it.

AS mentioned the easiest way is to see if the compressor inlet has been bored out. :)

Edited by gotRICE?

Another way to tell is by the cartridge. Often hi flow jobs consist of putting a different cartridge such as a 2860 or 2871. The casting of the cartridge looks different to that of stock, If its a relatively new hi flow, the cartridge will look newer and with less rust.

I sent a stock RB20 turbo off to hypergear to get high flowed, and when I got it back the centre housing of the turbo looked quite different to before, obviously very clean, but also different, so posting a pic of that as well might help?

I sent a stock RB20 turbo off to hypergear to get high flowed, and when I got it back the centre housing of the turbo looked quite different to before, obviously very clean, but also different, so posting a pic of that as well might help?

What sort of power did the RB20 make after you got it back from Hypergear? and was there much difference in the low to mid range response? am considering doing the same.

Mike.

coz he originally bought it already moded and has NFI?

a couple of the cars i sold were sold on rep, the new owners have NFI whats in them and if they arent in contact with me when they sell then they never will

equally so many people get their cars done at shops and dont ask questions

What sort of power did the RB20 make after you got it back from Hypergear? and was there much difference in the low to mid range response? am considering doing the same.

Mike.

Am getting it tuned very shortly, hopefully next week, but on whatever tune is running it spools up well, no power after 5000 rpm, but it's got some weird chip in the ECU that will be gone for a Nistune and should make some good power, looking like it will be great value for money, watch the RB20 upgrade thread, will be posting there after the tune, but for the money, so far recommended.

Didn't mean to hijack, carry on.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...