Jump to content
SAU Community

Recommended Posts

yeah i tried all that Ben and Joel,

I just took it around the block then and it drives ok, feels a bit sluggish down low but starts to go hard by about 4000rpm, but i dont want to take it to high RPM or drive it too much just incase... but i drives, but will not hold idle.

  • Replies 285
  • Created
  • Last Reply

Top Posters In This Topic

HEY bbenny

just a thought but in the process of taking it all apart you may have accidently disconnected 1 or a few vacuum hoses...i know when i was mucking around puting in a catch can i knocked a vacuum hose and it did the same thing...idle would drop then die....similar to when you have a stock RB20DET and disconnect the plumb back pipe from the BOV

just a thought..maybe check all ther hoses

Aaron

yeah i tried all that Ben and Joel,  

I just took it around the block then and it drives ok, feels a bit sluggish down low but starts to go hard by about 4000rpm, but i dont want to take it to high RPM or drive it too much just incase... but i drives, but will not hold idle.

Wierd?? sounds like a vacum leak, or something like that. Is your vacum lines hooked up to your BOV? Might pay to get a timing light and check the timing??

Does it blow alot of black smoke out of the exhaust at idle? That is a sure sign of a vacum leak.........

i played with the idle, but no adjustments made any difference.

i did pull the throttle body off for the installation but i dont think that would be the cause.

It runs fine when you give it some throttle.

the only thing i see responsible is the stiff in. cam...

i have tried just about everything else there is!

i played with the idle, but no adjustments made any difference.

i did pull the throttle body off for the installation but i dont think that would be the cause.

It runs fine when you give it some throttle.

the only thing i see responsible is the stiff in. cam...

i have tried just about everything else there is!

does seem odd, thats why I thought of the throttle, maybe its not open enough under idle or something? could explain why its running fine when the throttle is open a little? just a thought, as other wise I have no idea mate, sorry

You checked base timing yet? what is that set to?

I can't really see how a cam that is harder to turn (but is also is just as hard when the stock cam is in place) would be the culprit

well it was noticably harder to turn...

but then again that could be due to some of the lobes compressing a valve or two...

I can only point to a few possibilities - either the in. cam is not turning free enough, as we have discussed.

or the posibility that the timing belt jumped a tooth when i started the engine

however i did turn the engine manualy 3 revolutions and check the timing marks on crank and cam pulleys...

Its frustrating!

I will disasemble the whole damn thing again and see if i find anything.

Yep i think it is.

Ive decided to bail on the cams as i just cant afford aftermarket management.

otherwise it would be one kick-ass upgrade, i mean 25rwkw average increase for $300 is pretty damn impressive!

so im a little dissapointed i cant pull it off with the std ecu

i can confirm it is the ECU flysky. because i checked and tried everything, there were no other causes.

and SydneyKid has done several running a PFC with no problems and considerable gains.

no probs with standard cams joel

Cams and cam gears are in... only thing is i need someone i Melb that has a blown RB20 that i can steal some parts off.

I need the cap for cylinder no.6 on the inlet cam...as one of the stud has siezed in the aluminium cap, i was lucky to get it unbolted from the head without snapping or seizing...

Anyone in Melb able to help me out, or know of a friend/workshop that can help me without woth one (will need thw two stude that go with it as well.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
×
×
  • Create New...