Jump to content
SAU Community

Recommended Posts

  • 7 months later...

Well, it has been ages since I've posted on here, and basically nothing has happened with the car... A lot of stuff happened for me though, I was offered a job up in Sydney and am now living and working here, sold my ute and R33 skyline but kept the R32. The plan is to come back on weekends and take it out to the track every now and again, do some super sprints and hill climbs etc to get back into it. I don't own a car up here (close enough to the city there's no need) so I need to get back into driving properly.

I've been waiting on some stuff with the mechanic for a while (have been pestering him with phone calls) but got a call last week with some good and bad news.

Good news: My mechanic had his auto electrician friend around and they isolated the ECU on the loom from the rest of the car and were able to get the injectors firing by turning it manually, the PFC was functioning perfectly. There were also a few wires found which were seemingly disconnected when the car was stripped out and hadn't been reconnected. At this point everything was looking good for getting it to finally turn over properly.

Bad news: They hooked up the splitfire coilpacks and tried again, the PFC turned itself off and started to get a burnt smell. They disconnected the coilpacks, but after this the injectors no longer worked and the PFC didn't come back on.

I got in contact with my mate who fixed the PFC last time, he went and picked it up from the mechanic the next day. The exact same two chips have burnt out, which means it should be fine (RAM chip and another, no ROM chips as far he can see), but still needs to be fixed. They were thinking the coilpacks may have issues (I know there's two types for RB25's depending on your engine?) or a resistor pack which my friend has taken and will be testing also.

Anyone have any ideas as to what could be causing this? Previous experiences or knowledge in this area would be great as I don't particularly want to be playing the "toast the ECU" game each time they plug it in.

THE ENGINE STARTED!!!1!

Had a call from my mechanic yesterday, when the ECU was fried the other day they actually went through the whole process again but with one of his friends GTR Power FC's (brave move). This had the injectors firing again, and after hooking everything up it still continued to function though there wasn't any spark, where my ECU turned into an expensive (though shitty) toaster.

A few days later he shoved in an RB20 ignitor module, and hooked up a stock standard RB20 ECU. This gave it spark, it started, and he ran the engine for around 20-30 seconds. Everything sounded healthy, oil pressure built up etc.

Now when he called he said his friends ECU was a PowerFC for a R32 GTR, whereas mine is for an R33 GTR and that may explain why mine exploded and his didn't. As far as I know (and as far as I can see online) the PowerFC released versions for the R32/R33 GTR (combined, with Autech Stagea also?) and the R34 GTR and GTST variants were separate. They opened up both PowerFC's side by side and the internals are completely different, possible different models? I've asked the mechanic for the model number of his friends PowerFC which worked so I can check a few things out.

He suggested that there was simply an issue with my old ECU after the first encounter which caused it to fail again, and that buying a new PowerFC would fix the issue. Seems strange to me that a stock RB20 ECU works though, as the wiring is meant to be different?

Either way, the engine sounds healthy and actually works, that's the most expensive part of the whole operation so it's a relief to finally hear it turn over. At this point I'm looking at buying a brand new R32/R33 GTR PowerFC to put in the old girl, but I want to be certain it will work before I do.

Any thoughts on the above would be much appreciated :)

TL;DR

My engine started, it's healthy. I ejaculated from pure excitement. Shit's still broken.

the rb20 ecu will run fine on a modified to suit gtr loom as the main difference between the 2 is just doubling up the the afm signals.

gtr power fc's are cheap as chips i wouldnt bother with a nistune board as they arent that cheep and a power fc is easier to retune if your going to play around with the car

R32 and R33 ECU's are identicle. The PFC has got about 5 different versions, no feature changes just different manufacturing techniques.

If you run a GT-R PFC you need to mod the airflow maps to suit the single AFM. Not hard to do if your tuner has the Datalogit software

.....wut?

I think he's talking about the R32/R33 PowerFC ECU's ;)

Looked into Nistunes, it appears they really aren't that much cheaper if you're starting with nothing (no base ECU, no consult cable etc) and want the tuning software. I also briefly looked into Haltech, but seeing as I'd need to change the loom _again_ to do that I'm pretty hesitant and don't see any major benefits for what I'll be doing.

I called the mechanic up to talk about the Nistune option, and at this point I wasn't certain it would even run with an RB26 PowerFC, but he assured me everything was working except for spark with his mates ECU, and now the ignition module has been replaced it should be good to go. He's getting his mates PowerFC back and will get her started with that over the next week, and will pass on the model number just to be sure.

Does anyone know of any ridiculously cheap R32/R33 GTR PowerFC's around Tassie? If not I think I'll go with a brand new one from somewhere which will give me a 12 month warranty, I want to be 100% certain there's nothing wrong with the ECU when we put it in because of all the dramas we've had up to date.

  • 3 weeks later...

Down for Christmas and just got back from looking at the car, ordered a new ECU from Brad before I came down and it has been installed in the car with no problems. The 6boost manifold has been mounted with the Tial wastegate plumbed in, and the 3076r is hooked up properly as well.

The only thing (that I'm aware of) that needs to be done is building the dump pipe and some of the intercooler piping, then it's a bit of tidy up and a tune. He started it up and it was as loud as hell, to be expected with no exhaust set up yet, but sounds like an absolute beast.

Glad that all the electrical issues are out of the way (or appear to be for the moment) so we can focus on getting everything else set up and running. Once it's all done I'll be catching the first flight down to take her to the track.

Thanks to Brad for a super quick delivery of the PowerFC ;)

Yay!!!

How good is brad?! Always super helpful :) hilarious sense of humor to boot

Great to deal with, definitely would recommend to anyone. He was really helpful and very quick to get the PowerFC down to Hobart, also flashed the ECU to the right injector size and AFM before posting it down.

  • 4 weeks later...
  • 4 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...