Jump to content
SAU Community

Recommended Posts

Ok, i did a quick search for the same problem, but i couldn't find anything.

I have an odd ticking noise coming from my engine bay, it's irregular, and only happens when im idling. it's coming from the drivers side of the engine bay. i'm fairly certain i have a dodgy AFM, and my only theory is that it's playing havok with the injectors so they're turning on and off randomly or whatever injectors do at idle. the idle does jump around slightly, between 700 and 1200, but usually sits around 700 - 800. it goes away as soon as i rev it and never happens while driving. is there anything serious that could go make that noise on that side of the car? it's sort of like an electronic ticking like a solenoid going spastic.

anywho, any help appreciated.

Link to comment
https://www.sau.com.au/forums/topic/38937-random-ticking-noise-in-engine-bay/
Share on other sites

nah oil is fine, it's an electrical ticking noise, like a solenoid clikcing on and off at random intervals. whenever my idle is playing up is when it happens. if the idle is being a good boy on that day it won't do it. that's what led me to believe possible injector problem.

Interesting... I had a ticking noise., but it happened all the time... I found it out to be the electric window switch was playing up, when i put my window down, the switch would stay partly on, and it would tick (ie a solenoid). I've figured out aslong as i make sure the switch is off after i put my window down its fine... Probably not wat ur problem is, but thought it was worth a mention.

one solinoid that is fairly loud is the vvt solinoid which comes on as soon as there is movement of the throttle, your tps (throttle position sensor) could be dodgy and kicking the vvt solinoid in and out.

just a thought

this sounds like my problem, thanks dude. i'll have to get my TPS checked out.

If you have a dodgy AFM then there's a fair chance the idle's jumped because the ECU's in limp mode. Dodgy TPS shouldn't cause the idle to jump - I think the ECU resets its throttle reading when you start the car, ie it makes whatever it's reading then as 0% throttle.

I have the exact same ticking noise on my car. It's a worn lash adjuster. Nothing to worry about, just annoying. The reason it only ticks at or near idle is because that's when oil pressure is at its lowest, and if the adjuster is worn it'll return the oil more quickly than it should and so 'bleeds' itself. Think about trying to blow up a balloon with a small hole in it. If you only blow a little bit, it will stay flat. It you blow harder, so that you're putting in more air than the hole is letting out, the balloon will stay inflated.

Different oil doesn't fix it - well maybe something like 80W90 would, but that's not a good idea :rant:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Power steering is probably because someone has nuked the HICAS CU and you no longer have the variable power asist doing what it is supposed to. How much boost are you running? You are aware that any more than 10 psi on the stock ECU is just asking for it to go to full R&R (that's Rich & Retard, which is effectively Retarded and Retarded!) which kills all the power. Depending on the exact conditions, it can just be runnign on the fat and stupid end of the maps, then the conditions change, you make a little more boost and the ECU goes into panic.
    • @BuiltNotBought Just as GTSboy said.   If you want driveabilty and more low down torque..keep the stock runners. They are VERY good from a factory. I have them too on my RB25DET NEO and as a GTSboy i have fmic but with stock piping route(i have Blitz intercooler) Iam making around 320 BHP and the car pulls "hard" from like 2,5k all the way to 7k. I have it dyno tuned to mimic N/A power curve and making little less max torque due to the smallbox tranny. But driveability is very great. I had 350Nm below 3k so car feels very quick.   EDIT:  Not my channel but i saw this and i know that is what i want (and i have exactly this)  
    • Looking to sort out a couple of issues on my skyline  It recently was rebuilt, however rebuilder long story short did not give two flying effs about the work he did. So moving forward it's running but I have two persistent issues 1) it has a misfire / lag type of issue (was at higher RPMs but I had a dead piggy back ecu removed which improved it) now it's not as bad but still does it at random, I thought it may have been a boost issue I'm running an older turbosmart dual stage controller, turbosmart told me to try running off gate pressure however it still has a lag at random times. It has New MAF, maf plug, coil packs, sparks, CP harness.. injectors tested and cleaned. Factory ECU. 2) Power steering issue. It is tight as anything. Flushed power steering, rebuilt my pump because the bearing was shot. Flushed again still tight (mainly when parking and going slow into my driveway etc)  No kinks in hard lines, replaced the lines I could see had cracks. Still tough to steer.  I was told to shim a coin and place into the solenoid plug? Is there anything else. My steering angle sensor also has a issue. It's a used one I replaced, does it need to be calibrated? I feel like I've tried everything and this car is my voodoo doll.   
    • Holy shit... wow!!! I totally missed this
    • One main filter. Each tank has a prefilter to keep rocks and small children out, then the big main filter that also does water separation. Clogged the first one so bad it was like a rev limiter at 3200rpm. Literally just like dropping the throttle off and maintaining rpm!
×
×
  • Create New...