Jump to content
SAU Community

Recommended Posts

Hey everyone iv tried searching google and all that but I keep getting mixed answers. Now I'm putting a sr in my BMW and I have a sr box and a rb20 box either one will work I just want to know what one is better I don't want stupid answers only people that have used both. The sr box is out of a 180 type x and the 20 box is out of my old 32. The sr will be running a td06h-20g so I'm hoping around 260kw which the 20 box handled before. Anyone thats thinking buy a rb25 box I know they are better but a pain to fit up to a sr. Any info would be gold

RB20 and RB25 gearboxes bolt to the backs of RBs. So I would expect you would have the same issues using an RB20 box on an SR as you would an RB25 box on an SR.

The SR20 and RB20 internals are very similar though, with the same PPG and OS Giken part numbers anyway. So general health and age would be the determining factor one would think.

I would be sticking with the SR20 gearbox behind an SR20. Just be sensible with the sprung centre clutch and use good quality Castrol fluid and would be ok provided the car isnt being clutch kicked like a wet, stray dog

Yeah that's what I would do. I just don't want to put a weaker box on when I have both available I already need a custom shaft so I don't care about that. Also the shifter is in different locations the 20 box seems to line up near perfect. I'm not to worried about gearing as the diff in using (m3 LSD) is already in the 3.8 regon I think so that would decide most of how the car reacts.

They are for most part the same box, no real difference, just made for a different car. So go with the SR20 for ease of use. As for RB25 gearbox, you can buy SR20 adaptor plates so no cut and shut necessary. Running 260rwkw that's the path I'd heel heading down, personally.

I don't think it really matters which box you use. My experience has been that Nissan makes near indestructible gearboxes. (Although I have heard of 1 person who managed to lunch 3 RB boxes in a matter of months - probably using a VHD multi-plate clutch, and sidestepping the clutch at 7000 rpm.)

Since you are using a SR engine, it makes good sense to use a SR gearbox, IMHO.

another thing i've been told is that the SR has longer raitos. may want to scope that out for yourself though.

RB tops at around 200, SR at 240ish. (Same diff ) but again, double check that...

I can tell you now my 20 box seen more the 200 got 215 (nismo 260 cluster) before I slowed down on a private road of course diff is the main controll of top speed so the m3 diff would benefit from a shorter ratio box

Yuh, not even close to correct.  The RB20 will see over 180 km/h in 4th easily, run to much much more than 200 in 5th.  The main differences in ratios between SR cars and RB cars is that the RB diffs are shorter than 4:1 and the SR diffs are taller than 3.7:1.  The SR gearbox ratios are therefore better suited to the longer diff gears.

Bsa.  Just use the SR gearbox.  It is better suited to your engine and your diff ratio.

Edited by GTSBoy

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...