Jump to content
SAU Community

Recommended Posts

Hi guys , im almost done building my RB26DET , who's gonna sit in a 200sx s13.

084.jpg

Project can be followed at : http://www.muldal.blogg.no . Its in Norwegian. But its a picture page, not really a blogg ! So the pictures will do the talk ! :-)

Love to get pos/neg feedback !

Regards Fred from Norway

Link to comment
https://www.sau.com.au/forums/topic/390643-s13-rb26-gtr-and-garage-project/
Share on other sites

Very nice work!

Please post the media here instead of a link to an external site as per the rules for this section; http://www.skylinesaustralia.com/forums/topic/279306-where-did-my-thread-go/page__view__findpost__p__4716975

You can get some 120 or 150 degree fittings to replace the 90 degree ones.

Or replace the adaptors from straight to 90 degree like this one on the right

380-03.jpg

But the bad thing is that i need a 22mm (metric) to AN (AN size does not matter) And i don't think that is possible to get in the same shape as the right pic. Or is it`?

im sure it all has been done, just have to try someone locally that does fittings or look more in depth at the Speedflow, Earls catalogues online (or whomever makes your existing adaptors, those 2 are just the main ones used in AUS)

  • 3 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi everyone, I've been wrestling with this for a while now and have been trying to find out the cause. For context, the turbos used are Garrett 2860 -5s, the BOV is a BNR32 HKS SSQV IV kit, the car is currently tuned to ~470 whp on 17.5 psi. The car drives normally, pulls well when it doesn't happen, and I can replicate it fairly easily. It does not sound like turbo shuffle or flutter. The engine has only a thousand or so miles and has had this behavior since it was completed. After my engine was built for my R32 GTR, I noticed that the car now sometimes makes an air discharge sound on what appears to be positive boost pressure that sounds really similar to a BOV. I had thought that it was a BOV issue but even when replacing it with a brand new unit, the sound persisted. It seems like it's coming from the passenger side but I may be mistaken. The closest scenario I could find was this post here https://www.gtr.co.uk/threads/maybe-a-boost-leak-opinions.147955/https://www.gtr.co.uk/threads/maybe-a-boost-leak-opinions.147955/ started by @yakshii and it sounds very similar. As in, at partial throttle once I reach positive boost I begin to hear the same psh psh psh psh psh sound like air is leaking somewhere when I keep the throttle in the same position. It most commonly happens in 4th gear at around 3-3.5k RPM and 5th gear around 2.5-3k RPM, which seems to coincide with normal positive boost thresholds. It might be similar to what @Austrian GTR mentioned about his own HKS SSQV. Notable difference would be that when he applies more throttle when it happens, it stops. In my scenario if I apply more throttle during this repeated psh psh psh sound, the cadence of the sound gets faster and louder rather than stopping. If I lift off slightly and apply throttle again, it will normally stop and pull without issue. I've checked all rubber couplers to ensure that they are tight, but have not gotten the opportunity to properly do a pressurized boost leak test. If anyone has had similar experiences or thoughts on what might be the cause, I'd be very keen to hear them. I also have a video of it happening from inside the cabin, if that would make it easier to understand: https://youtu.be/2zqZXcx8jbA
    • I'd want at least $40K for mine, but thats easy to say cos I'm not selling anyway.
    • That's incorrect. We have 4 seasons, consisting of pre winter, winter, post winter and a small glimpse of hope! 
×
×
  • Create New...