Jump to content
SAU Community

Recommended Posts

Hi, new to the forum. Just got a '98 R34 GTT Sedan. Looking to swap out wheels. Is anyone running hub adapters? Looking to fit a set of work meister s1 3p, 18x8.5x10.5 +49. Tires are slightly stretched. Bolt pattern is 5x130 ( they were on my Porsche 944 turbo ). If I get 19mm adapters that go from 5x114 to 5x130 that should give me 20mm offset, correct? My only worry here is if the stock hub studs would be too long, hitting the back of the rim, popping out of the hub adapters. Does anyone know the length the stock hub studs stick out from rotors? Just trying to see if I can make this work. Thanks in advance.

1 hour ago, shortyboy said:

My only worry here is if the stock hub studs would be too long, hitting the back of the rim, popping out of the hub adapters.

I don't think that that's your only worry.

First up, it's not a problem in itself. If it happens, you just put shorter studs into the original hubs.

Secondly....to try to fit a 10.5" wheel on the back of an R34 is an exercise in getting the offset absolutely perfect. You'd want to be damn sure (measure it yourself 20 times) before committing. Because you don't have the option to do anything except just throw that wheel onto the (probably only choice of) hub adapter, you only have one outcome. Either it fits or it fouls and you probably can't do anything about it if it fouls (beyond guard mods, perhaps coilovers, whatever it takes to find the required space).

  • Like 1
On 12/5/2023 at 5:23 AM, shortyboy said:

Hi, new to the forum. Just got a '98 R34 GTT Sedan. Looking to swap out wheels. Is anyone running hub adapters? Looking to fit a set of work meister s1 3p, 18x8.5x10.5 +49. Tires are slightly stretched. Bolt pattern is 5x130 ( they were on my Porsche 944 turbo ). If I get 19mm adapters that go from 5x114 to 5x130 that should give me 20mm offset, correct? My only worry here is if the stock hub studs would be too long, hitting the back of the rim, popping out of the hub adapters. Does anyone know the length the stock hub studs stick out from rotors? Just trying to see if I can make this work. Thanks in advance.

I'm running 18x10 +20mm rear on an R34 2 door GTT and it's too wide. It works, just, with 265/23 tyres and rolled fenders. But it would be about perfect at +25mm offset. If I were buying the wheels again - bought originally for my 350z - I would opt for 9.5 rear then f*ck around with a 5mm spacer if necessary. 

Edit: I should add that the coupe has about +10mm body width at the rear fenders.

IMG_3570 DNG-5.jpg

Edited by GoHashiriya
  • Like 2

Need some advice myself.

These are my wheel options

19x8.5 +35

19x8.5 +43

19x9.5A +25

19x9.5A +35

19x10B +25

19x11B +18

 

I'm thinking 19x8.5 35 front and 19x9.5 35 rear
Not many people running 19's, I've mostly seen 18's.  But staying between 30 - 35 offset seems to be the consensus

I'm wondering if I could do 9.5 +25 or 10 +25 in the rear.  

I'm looking for flush, not slamming the car or any camber.

I guess its hard for me to visualize not knowing where the fender is.

 

 

Screenshot 2023-12-11 at 5.28.49 PM.png

Screenshot 2023-12-11 at 5.29.06 PM.png

What car? Do you not have it in possession?

The reasons I ask are:

  • Obviously it differs between the different models as to what will fit, including choices like strut/coilover choice,
  • It makes no sense to be buying wheels for a car that is not in possession. When you have it in possession, you can actually measure what is on there and how much clearance you have. Then the answers just fall from the sky.
  • Like 1

Yes, so then my advice is as I have given in the past. Don't rush it. You don't have to let the excitement make you make bad decisions. You don't have to have the nicest wheels immediately. You can wait a few extra weeks. Get hold of it and measure it yourself.

It is important to realise that the subframe might not be evenly set left-right across the car and you could easily have a 10mm difference left to right. And if you're trying to do this from internet measurements and pushing it to the last mm, you will possibly find yourself with it rubbing on the inside on one side of the car, and on the outside on the other. The only way to win in those circumstances is to go with a more conservative wheel choice, because, while you can put a 5mm spacer on one side, there is no such thing as an "unspacer"** for the other side.

**even if I did manage to convince some numpty that they existed abut 20 years ago.

5 hours ago, myktek said:

forgot to mention, R34 GTT Sedan

The car is not with me at the moment, in the shop getting some maintenance work.  I just got it a few weeks ago

I agree with GTSBoy on this, but I will say that 19x10 +25mm will be a stretch on an R34 sedan body. Out of your options, I'd wager the 19x9.5 +25mm as being the closest to perfect (flush), but I'm not considering the implications a 19" wheel will bring over an 18". When you get real close to making it perfect, your alignment settings will have an impact too; I rubbed very slightly on hard corners/rumble strips at -2.5 rear and not at all when set at -3.0.

 

On 12/4/2023 at 12:14 PM, GTSBoy said:

I don't think that that's your only worry.

First up, it's not a problem in itself. If it happens, you just put shorter studs into the original hubs.

Secondly....to try to fit a 10.5" wheel on the back of an R34 is an exercise in getting the offset absolutely perfect. You'd want to be damn sure (measure it yourself 20 times) before committing. Because you don't have the option to do anything except just throw that wheel onto the (probably only choice of) hub adapter, you only have one outcome. Either it fits or it fouls and you probably can't do anything about it if it fouls (beyond guard mods, perhaps coilovers, whatever it takes to find the required space).

 

Just trying to make wheels I already have work. If I cant get the rears to fit properly, Im looking to get Okubo Factory rear fender flares. The adapters have been ordered from Caold in Australia. So itll take a bit to get to me in Hawaii.

On 12/10/2023 at 6:26 PM, GoHashiriya said:

I'm running 18x10 +20mm rear on an R34 2 door GTT and it's too wide. It works, just, with 265/23 tyres and rolled fenders. But it would be about perfect at +25mm offset. If I were buying the wheels again - bought originally for my 350z - I would opt for 9.5 rear then f*ck around with a 5mm spacer if necessary. 

Edit: I should add that the coupe has about +10mm body width at the rear fenders.

IMG_3570 DNG-5.jpg

Thanks for the specs and pic. So my 10.5x18 at +20mm definitely wont fit. Lol. Lucky I ordered a pair of 15mm and 20mm adapters. Ill keep this post updated Once I get them.

  • 4 weeks later...

Adapters came in. Got them from Caold Technology in Australia. 20mm in the front and 15mm in the rear. Front looks like it could take another 5mm. Work Mesiter S1 3P 18x9.5 and 18x10.5 +49. Coilovers are Blitz, may go lower a bit but the exhaust is already scraping alot of driveways. 😂 

PXL_20240108_031402033.jpg

PXL_20240108_031409862.jpg

PXL_20240108_031422221.jpg

  • Like 1
  • 2 months later...
On 1/8/2024 at 4:50 PM, shortyboy said:

Adapters came in. Got them from Caold Technology in Australia. 20mm in the front and 15mm in the rear. Front looks like it could take another 5mm. Work Mesiter S1 3P 18x9.5 and 18x10.5 +49. Coilovers are Blitz, may go lower a bit but the exhaust is already scraping alot of driveways. 😂 

PXL_20240108_031402033.jpg

PXL_20240108_031409862.jpg

PXL_20240108_031422221.jpg

You're right, the front needs about another 5mm and a size wider on the tires. Rear needs to lose about 10mm in offset.

The wheels work well with the car though, I would just see if there's any machining that can be done with the adaptor and original studs. Studs are easy to replace so you shouldn't be too frightened about shortening them. Just buy some spares first. Of course it's your car, not mine, so do what you want.

On 1/9/2024 at 2:26 PM, myktek said:

Konig Heliograms

19x8.5 ET32 225/40/19

19x9.5 ET35 265/35/19

On Tein coilovers, no rubbing  

413961452_1064388084881345_1276627699449507906_n.jpg

413026854_316292818053014_3798155686686440745_n.jpg

413898037_922598355422868_985077072375819078_n.jpg

414269832_383497300754294_1810082273763923967_n.jpg

Fitment is nice and overall it looks good, albeit 19s are too big for me - I've been tempted to go with 17s. Did you roll the fenders and is there any rubbing up front at lock?

7 hours ago, GoHashiriya said:

Fitment is nice and overall it looks good, albeit 19s are too big for me - I've been tempted to go with 17s. Did you roll the fenders and is there any rubbing up front at lock?

I initially rubbed only on the driver front because of my fat ass, lol, so just adjusted the coilovers to support my 220 lbs of weight lol.

Didn't need to roll fenders or camber.

  • 5 months later...

ER34 GTT Altia 

I want to have such setup: 

18x8.5 ET35 - 235/40R18 
18x9.5 ET22 - 265/35R18

I have no worry for front. 
I'm confused about ET22 rear.
Is anyone ride on 265 at rear with ET22 or less, I don't want to roll the guards. 

  • 2 weeks later...
  • 1 month later...

Wheels: Work VS-XX
F: 18x8.5 +28 r-disc  235/40/18
R: 18x9.5 +32 a-disc 255/40/18

Regarding the fronts:

  • I'm not sure if I needed to get r-disc since there's about 1/2inch 2/3inch gap between the R34 GTT brakes and the wheel.

Fitment:

  • I would say it is almost perfect. The fronts could be a bit more aggressive though.
  • No camber adjustment, just lowered.

 

 

DSC03865.jpg

DSC03917-2.jpg

rear.jpeg

front.jpeg

Edited by ledvd
  • Like 3
  • 2 months later...

Since this is the page where i found myself while searching for wheel fitment, i will add the ones im looking to replace too.

Fenders arent rolled, so in big bumps they touch the tire (tires could be narrower). no any adjustable arms, so the camper is what it is (dont know).

Wheels: 5ZIGEN Fireball

Front: 18x9.5 ET12 - 245/40
Rear: 18x10.5 ET25 - 285/35


spacer.pngspacer.png

36 minutes ago, No1 said:

Since this is the page where i found myself while searching for wheel fitment, i will add the ones im looking to replace too.

Fenders arent rolled, so in big bumps they touch the tire (tires could be narrower). no any adjustable arms, so the camper is what it is (dont know).

Wheels: 5ZIGEN Fireball

Front: 18x9.5 ET12 - 245/40
Rear: 18x10.5 ET25 - 285/35

So, they simply stick out too far because very wide + very low offset (at the front).

At least it's up nice and high so they shouldn't bang into the car too much.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
×
×
  • Create New...