Jump to content
SAU Community

Car Playing Funny Buggers :(

soultz

By soultz,
in Engines & Forced Induction

 Share

Recommended Posts

soultz Community Regular

soultz

Posted
Posted

hey guys,

took my car to get fuel in the morning yesterday, then washed it. ready for heathcote drag day. we left for the hume highway at 7.30, the car got to the servo fine where we met up with the rest of the cars attending. when we left i started the car all was ok, was travelling down the highway at 100Kmph, then all of a sudden felt the car not shaking but more like a shutter sort of like when you are about to stall it in a manual but all the time...when i accelerated the car would go nowhere untill the turbo kicked in then it JUST dragged the car along...we stopped at a safway on the side of the road, and i turned the car off and back on, and it still done it...i looked under the bonnet and everything seemed ok....i als checked for boost leaks using my gauge, and vaccum and boost was fine...i then turned the car off, left it for a bout 5 mins and turned it back on and it was FINE??!! i still didnt trust it so i left it there all day and went to the drags without it. i came back later that afternoon to grab it and it started fine, drive 50 mins home fine and now runs fine...i cant fault it now??

the car also sort of missfires when i put the foot to the floor at 5000 rpm, but the revvs still keep climbing like normal??? i changed the coilpacks and that helped a LOT, but it still does it under full throttle...its not like a missfire but like a stutter??

can anyone help with BOTH these problems???

cheers!

Link to comment
https://www.sau.com.au/forums/topic/391524-car-playing-funny-buggers/
Share on other sites
  • Replies 46
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

89CAL Grand Master

89CAL

Posted
Posted

Id point towards a plug or sensor got wet or the fuel you got had some crap in it. seen as the only 2 things you did was wash it and put fuel in it. it might clear itself up after a drive, don't flog it to much in the mean time

SargeRX8 Grand Master

SargeRX8

Posted
Posted

In the boot, remove the back board, you will see 4 10mm screws holding down a plate. Remove that. Under there is a black lid thing with 3 hoses. You want to unplug the wires and get a rag ready for when you remove those lines as fuel is going to come out. Keep the hoses out of the way and take that lid off. To do that get a piece of wood and put it in the notches in the lid and tap it with a hammer to loosen it and get it out. Fuel pump is inside. Plenty of guides here to elaborate and show pictures of how to do it, wire it and fit it back in.

Its not a fun job. Don't do it on a hot day and be ready for swearing. DO NOT EVER attempt to do it with more than a quarter fuel in the tank. Hell run it to near empty if you can.

Hanaldo Grand Master

Hanaldo

Posted
Posted (edited)

Fuel pump isn't that hard if you get a good one. my tomei pump was easy as. pull the old one out, drop the new one in

This. Took me half an hour, including diagnosis of why the car wouldn't start when I reversed the polarities :P

Agree with running the tank near empty first though. Arms get real damn itchy immersed in petrol ermm.gif

Edited by Hanaldo
SargeRX8 Grand Master

SargeRX8

Posted
Posted

This. Took me half an hour, including diagnosis of why the car wouldn't start when I reversed the polarities :P

Agree with running the tank near empty first though. Arms get real damn itchy immersed in petrol ermm.gif

And in a hot day, that itch plus the humidity rising from the fuel tank is enough to really f**king frustrate you when you cant get that cradle in the bracket.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • ARB26
      S1 Autech 260RS Wiring Diagrams

      By ARB26 · Posted

      Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • DanMac34
      R34 Speedo not working after manual swap

      By DanMac34 · Posted

      Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • joshuaho96
      Speed Sensor replacement

      By joshuaho96 · Posted

      Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • QB6SAGR
      Tein Circuit Master- rebuild worth it?

      By QB6SAGR · Posted

      Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • funkymonkey
      Howdy Y'all

      By funkymonkey · Posted

      Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
×
×
  • Create New...