Jump to content
SAU Community

No R36 - R35 End Of The Line!


Recommended Posts

I recently heard a rumour from sources in Japan that, The 2012/13 Nissan R35 is the last GTR for at least this decade?

Apparently Nissan have achieved their goal of smashing the World and burning their reputation into the sports car scene as the producers of the World's best ever performing value for money super car.

It makes sense when you consider how long the R34 magic lasted, years after they stopped making them.

It may be anywhere between 5 to 8 years before we see an R36?

Anyway, if this is the case, it will be interesting to see the affect this will have on the value and demand of used R35's.

Has anybody else heard the same?

Edited by kymbo
Link to comment
https://www.sau.com.au/forums/topic/391898-no-r36-r35-end-of-the-line/
Share on other sites

my intention was to sell the r35 when the r36 is released.... looks like I'll be hanging onto this car for a while then

we'll know for certain by about mid year to see if they start working on a 2013 (US 2014)

if true, may even look at buying a 100% stock spec v out of japan for the collection

Interesting.

I have heard a few arguments suggesting this couldn't happen with all the investment made in GTR facilities at dealerships, but I am sure our dealer delivery charges and hourly labour rate for GTR techs has nicely covered those little investments!

the more you think about it, the more it makes sense

dealers will continue to profit from the servicing of the existing cars, and more so as they start changing hands on used market and km's rack up exponentially

with the shift towards green energy, there is no doubt the next GTR will employ some form of hybrid tech. And I don't believe any manufacturers are anywhere near using this tech in high performance app's. It'll take them years of development to fine tune it

plus there's no where more to go with the current drip feed power increase on the r35. They'd be at the limit now of factory warrantied power levels (hence the small power jump in 2012 for marketing above all else). Doubtful they'd invest in an improved gearbox or change engine internals this late in the cycle to warranty over 600hp. They've also run out of chassis tuning ideas - read stiffer springs on one side to counter balance drivers weight in a 1700+kg car is pure wank

Edited by domino_z

i took kymbo's post as meaning there will be no further development - doesnt make sense for nissan to just stop production entirely, id imagine they'll keep building the current car for a few more years

Edited by domino_z

i took kymbo's post as meaning there will be no further development - doesnt make sense for nissan to just stop production entirely, id imagine they'll keep building the current car for a few more years

Possible. Maybe something like a series 2.

Good example is the MkiV Toyota Supra that ran from 1993 to 2002, mainly cosmetic with some mechanical upgrades.

I'd "imagine" Nissan would do something similar (as there is money to be made on a proven formula). Probably some more cosmetic tweaks, maybe a direct injection engine with variable valve timing on both intake and exhaust with lift.... Maybe introduce flex fuel.

While they still sell in US and worldwide they will still make them, providing they are profitable.

hurry up and get on the wagon mate - then grab your mate over there with the tuned 996 tt and come down to melb for some good driving roads

The days of large businesses making these sorts of decisions based on ideologies alone are long gone. Nissan know they have a responsibility to their shareholders to make as much cash as they can, the slick wankers in charge aren't car enthusiasts. They are money hungry narcs and they will stop at very little to make more money, it's what they do. I don't see them binning a hugely successful, iconic and profitable car just because they have achieved some fluffy goal.

You want a chunky prediction? We will see the R36 this decade.

i took kymbo's post as meaning there will be no further development - doesnt make sense for nissan to just stop production entirely, id imagine they'll keep building the current car for a few more years

Completely agree.

Even if we look at the engine emissions legislation we can be positive and confident that VR38DETT is not going to disappear in a hurry.

Euro 6 is only starting on the Sept 2014.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I myself AM TOTALLY UNPREPARED TO BELIEVE that the load is higher on the track than on the dyno. If it is not happening on the dyno, I cannot see it happening on the track. The difference you are seeing is because it is hot on the track, and I am pretty sure your tuner is not belting the crap out of it on teh dyno when it starts to get hot. The only way that being hot on the track can lead to real ping, that I can think of, is if you are getting more oil (from mist in the inlet tract, or going up past the oil control rings) reducing the effective octane rating of the fuel and causing ping that way. Yeah, nah. Look at this graph which I will helpfully show you zoomed back in. As an engineer, I look at the difference in viscocity at (in your case, 125°C) and say "they're all the same number". Even though those lines are not completely collapsed down onto each other, the oil grades you are talking about (40, 50 and 60) are teh top three lines (150, 220 and 320) and as far as I am concerned, there is not enough difference between them at that temperature to be meaningful. The viscosity of 60 at 125°C is teh same as 40 at 100°C. You should not operate it under high load at high temperature. That is purely because the only way they can achieve their emissions numbers is with thin-arse oil in it, so they have to tell you to put thin oil in it for the street. They know that no-one can drive the car & engine hard enough on the street to reach the operating regime that demands the actual correct oil that the engine needs on the track. And so they tell you to put that oil in for the track. Find a way to get more air into it, or, more likely, out of it. Or add a water spray for when it's hot. Or something.   As to the leak --- a small leak that cannot cause near catastrophic volume loss in a few seconds cannot cause a low pressure condition in the engine. If the leak is large enough to drop oil pressure, then you will only get one or two shots at it before the sump is drained.
    • So..... it's going to be a heater hose or other coolant hose at the rear of the head/plenum. Or it's going to be one of the welch plugs on the back of the motor, which is a motor out thing to fix.
    • The oil pressure sensor for logging, does it happen to be the one that was slowly breaking out of the oil block? If it is,I would be ignoring your logs. You had a leak at the sensor which would mean it can't read accurately. It's a small hole at the sensor, and you had a small hole just before it, meaning you could have lost significant pressure reading.   As for brakes, if it's just fluid getting old, you won't necessarily end up with air sitting in the line. Bleed a shit tonne of fluid through so you effectively replace it and go again. Oh and, pay close attention to the pressure gauge while on track!
    • I don't know it is due to that. It could just be due to load on track being more than a dyno. But it would be nice to rule it out. We're talking a fraction of a second of pulling ~1 degree of timing. So it's not a lot, but I'd rather it be 0... Thicker oil isn't really a "bandaid" if it's oil that is going to run at 125C, is it? It will be thicker at 100 and thus at 125, where the 40 weight may not be as thick as one may like for that use. I already have a big pump that has been ported. They (They in this instance being the guy that built my heads) port them so they flow more at lower RPM but have a bypass spring that I believe is ~70psi. I have seen 70psi of oil pressure up top in the past, before I knew I had this leak. I have a 25 row oil cooler that takes up all the space in the driver side guard. It is interesting that GM themselves recommend 0-30 oil for their Vette applications. Unless you take it to the track where the official word is to put 20-50w oil in there, then take that back out after your track day is done and return to 0-30.
    • Nice, looks great. Nice work getting the factory parts also. Never know when you'll need them.
×
×
  • Create New...