Jump to content
SAU Community

Recommended Posts

Auditioning may not be a bad idea, thanks Dale. Curious, was $950 landed or just the purchase price? If its landed and I can get a similar deal then the decision would be an easy one to make =)

I'm not really the best example unfotunately.

Mine was already in Australia, and was being sold by a guy who fell on hard times. This was at a time when they were still well above $1300 landed; so I couldn't refuse.

Edited by Daleo
  • Replies 118
  • Created
  • Last Reply

Top Posters In This Topic

Alrighty then, we've got some quotes back:

Mr Streeter - $1,142 delivered (depending on Exchange rate)

Imp Mnstr - $1,300 delivered (8 weeks)

TurboAlfa - $1,499 delivered (worst case scenario)

+ Dump & Mid - $700

Totalling $1,842 at its cheapest

The alternative would be local options:

Dump pipe - $470

Mid w/out cat - $230

2muffler cat back - $870

Totalling $1,570.

My next and only question is whether the Legalis is worth the extra $272? ...I'm not so sure but then I've never had any experience with aftermarket exhaust systems

My next and only question is whether the Legalis is worth the extra $272? ...I'm not so sure but then I've never had any experience with aftermarket exhaust systems

Yes.

There is a reason Nismo use the same main body design for their M35 exhausts.

Edited by iamhe77

Yep stick with a Jap cat back, the little extra is worth the research and quality of them and just get one of the 3 Aussie made dumps and front pipes. I would keep a high flow cat in the mid pipe if only for appearance to the blue boys.

I've never had a Jap cat back, I thought the main reason was noise, since they're all certified to a certain (quiet) volume.

I'm extremely happy with mine as is, and for me it's right in the sweet spot volume wise. That said, if mine is too loud, you can just order it with a bigger muffler, problem solved?

Depending on who does it locally, either way you're going to get a quality result. I think it'll probably come down to volume, and if it goes to someone who hasn't got experience building exhausts for these things it'll probably be too loud. Mine was first time, but at least you can go back to the local person and get it fixed.

get a scotty dump, no question on quality. then again im biased as i owned one lol

I think all 3 of the dumps that are usually mentioned will and are, all of good quality. It will just depend on the style you want and pricing your happy with.

Thanks for your help and opinions guys. I've done a bit of reading and would be happy to invest a little more in the Jap system the only problem or hurdle that remains would be to convince the better half of the investment value.

We're still yet to receive word on when the car will be shipped over so I'm deliberating as to when to put forward any orders, ie whether to wait till its landed or have everything ready to go once it arrives.

It seems, though, that we'll have ample time to ponder the pros and cons of each. =)

Q: How much difference does a cat back make to performance if you do the dump and mid pipe?

I did mine in one hit, I'd have no idea. Is it even worth it if you want a quiet exhaust?

Q: How much difference does a cat back make to performance if you do the dump and mid pipe?

I did mine in one hit, I'd have no idea. Is it even worth it if you want a quiet exhaust?

I did my dump pipe first, and there was a big difference in the response of the turbo, and a reduced amount of throttle required to hold the same acceleration as compared to the OEM strangler. Also, my fuel economy improved (once I removed my lead right clog)blush.gif

This say to me that there is a fairly significant hike in torque when the restriction is removed, and I'm sure there is a decent HP increase to go with it.

I love the rampant selling in these threads. :nyaanyaa:

Here's some unbiased advice:

Buy the cheapest dump and front pipe you can from (I believe the current 3 options are Scotty, Rex Kelway and AM).

If you want more performance/noise, either decide between a locally made cat back or one from Japan. The jap unit will likely be better made than the local unit unless you find someone dedicated like AM or Rex Kelway, and personally I'd always go the Jap unit since there's better resale.

Q: How much difference does a cat back make to performance if you do the dump and mid pipe?

I did mine in one hit, I'd have no idea. Is it even worth it if you want a quiet exhaust?

Noticeable difference.

I ran a Legalis with a Kakimoto front pipe and stock dump for some time.

No dyno but the same drive everyday showed higher boost when putting the boot in and slightly less throttle up the hills.

I love the rampant selling in these threads. :nyaanyaa:

Here's some unbiased advice:

Buy the cheapest dump and front pipe you can from (I believe the current 3 options are Scotty, Rex Kelway and AM).

If you want more performance/noise, either decide between a locally made cat back or one from Japan. The jap unit will likely be better made than the local unit unless you find someone dedicated like AM or Rex Kelway, and personally I'd always go the Jap unit since there's better resale.

Spot on Jase. thumbsup.gif

I did my dump pipe first, and there was a big difference in the response of the turbo, and a reduced amount of throttle required to hold the same acceleration as compared to the OEM strangler. Also, my fuel economy improved (once I removed my lead right clog)blush.gif

This say to me that there is a fairly significant hike in torque when the restriction is removed, and I'm sure there is a decent HP increase to go with it.

Makes perfect sense, but did you notice much of a difference when you did the cat back later?

Thats what I'm wondering. Seeing the difference between OEM and after market dump pipe and mid pipe, I know they'd make a huge difference on their own. Just curious what a cat back adds.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yeah well per the video it took 15s for the stock unit to start up....even if I give it a few seconds discount for starting that is at least 12 sec before you get a reverse camera if you are trying to leave a park.  The android unit is way faster, but 2016 for the stock unit is a long time ago in consumer electronics
    • Yea that’s why I said ima test them with multimeter and see the reads.
    • Only at idle. Isn’t a problem when rev it seems.
    • @Haggerty This seems silly to ask, but are you confident in your ability to tune the Haltech?  
    • Next on the to-do list was an oil and filter change. Nothing exciting to add here except the oil filter is in a really stupid place (facing the engine mount/subframe/steering rack). GReddy do a relocation kit which puts it towards the gearbox, I would have preferred towards the front but there's obviously a lot more stuff there. Something I'll have to look at for the next service perhaps. First time using Valvoline oil, although I can't see it being any different to most other brands Nice... The oil filter location... At least the subframe wont rust any time soon I picked up a genuine fuel filter, this is part of the fuel pump assembly inside the fuel tank. Access can be found underneath the rear seat, you'll see this triangular cover Remove the 3x plastic 10mm nuts and lift the cover up, pushing the rubber grommet through The yellow fuel line clips push out in opposite directions, remove these completely. The two moulded fuel lines can now pull upwards to disconnect, along with the wire electrical plug. There's 8x 8mm bolts that secure the black retaining ring. The fuel pump assembly is now ready to lift out. Be mindful of the fuel hose on the side, the hose clamp on mine was catching the hose preventing it from lifting up The fuel pump/filter has an upper and lower section held on by 4 pressure clips. These did take a little bit of force, it sounded like the plastic tabs were going to break but they didn't (don't worry!) The lower section helps mount the fuel pump, there's a circular rubber gasket/grommet/seal thing on the bottom where the sock is. Undo the hose clip on the short fuel hose on the side to disconnect it from the 3 way distribution pipe to be able to lift the upper half away. Don't forget to unplug the fuel pump too! There's a few rubber O rings that will need transferring to the new filter housing, I show these in the video at the bottom of this write up. Reassembly is the reverse Here's a photo of the new filter installed, you'll be able to see where the tabs are more clearing against the yellow OEM plastic Once the assembly is re-installed, I turned the engine over a few times to help build up fuel pressure. I did panic when the car stopped turning over but I could hear the fuel pump making a noise. It eventually started and has been fine since. Found my 'lucky' coin underneath the rear seat too The Youtube video can be seen here: https://www.youtube.com/watch?v=uLJ65pmQt44&t=6s
×
×
  • Create New...