Jump to content
SAU Community

Recommended Posts

I would go flat out to adelaide etc, have a look around, then go via the appostles, GOR, otways(stay over night in apollo bay and do the otway fly etc), then head down the bellarine peninsula, get the ferry to sorrento, then drive up to mount dandenong(stay a night at Gracehill in olinda, eat dinner at wild oak ;) ) go through the yarra valley(mt donna buang, the road from warburton to noojee,) jump on the monash fwy and take it into the city and do you city trip.

THEN, hall arse the whole way home ;)

oh, you must do phillip island, and the prom, and go to flinders blowhole on the [mornington]peninsula.

  • Replies 41
  • Created
  • Last Reply

Top Posters In This Topic

I would go flat out to adelaide etc, have a look around, then go via the appostles, GOR, otways(stay over night in apollo bay and do the otway fly etc), then head down the bellarine peninsula, get the ferry to sorrento, then drive up to mount dandenong(stay a night at Gracehill in olinda, eat dinner at wild oak ;) ) go through the yarra valley(mt donna buang, the road from warburton to noojee,) jump on the monash fwy and take it into the city and do you city trip.

THEN, hall arse the whole way home ;)

ill agree with this but you are starting to make an epic long trip.

Also consider taking the train home from Adelaide. Its quicker, you can relax and i assume going back is alot more boring cause you just passed everything not too long before.

EDIT:

Or another idea would be to fly to Melb rent a car and do some of the above drives. something like

>fly in and spend a couple of days exploring the city (goto the zoo, we love it!)

>rent car and do day trips to yarra valley etc

>over night trips? sorrento (check out the old ww2 base) then ferry across to bellarine peninsula to check out Torque (bells beach/rip curl/quicksilver shops?) stay somewhere over night around there then back to melb via geelong (Warrabee open range zoo on the way into melb) then spend another couple of days drinking epic coffee and exploring the cbd (arts centre, museum,HM Thearter for a play etc).

Hmm think i miss Melb/vic been a while since i have been there, lol.

Edited by Boss-zilla

ill agree with this but you are starting to make an epic long trip.

Also consider taking the train home from Adelaide. Its quicker, you can relax and i assume going back is alot more boring cause you just passed everything not too long before.

EDIT:

Or another idea would be to fly to Melb rent a car and do some of the above drives. something like

>fly in and spend a couple of days exploring the city (goto the zoo, we love it!)

>rent car and do day trips to yarra valley etc

>over night trips? sorrento (check out the old ww2 base) then ferry across to bellarine peninsula to check out Torque (bells beach/rip curl/quicksilver shops?) stay somewhere over night around there then back to melb via geelong (Warrabee open range zoo on the way into melb) then spend another couple of days drinking epic coffee and exploring the cbd (arts centre, museum,HM Thearter for a play etc).

Hmm think i miss Melb/vic been a while since i have been there, lol.

otways/GOR dont get decent until apollo bay(well, the anglesea-apollo bay section is nice, and then through to the apostles is awesome), torquay is a hole.

Man i miss the place, i'm back in 2 weeks for a week, YAY

otways/GOR dont get decent until apollo bay(well, the anglesea-apollo bay section is nice, and then through to the apostles is awesome), torquay is a hole.

Man i miss the place, i'm back in 2 weeks for a week, YAY

same. wife grew up in anglesea and we were living near by for about 18 months. nice little spot when its not full of tourists

same. wife grew up in anglesea and we were living near by for about 18 months. nice little spot when its not full of tourists

awesome. I spent many a holiday down there growing up. then lorne when I got older!

Would have loved to live down around Apollo bay, but it doesn't work for my career at this point in time... Hence moved from Toorak to Mount Dandenong(prior to coming here), peace and quiet and still commutable.

same, same!

Just talked to someone about some work that has popped up in Melb. Sounds alright but dont know............................

OT: also do the hot air baloon ride over the cbd Dale, if your into that sort of thing.

same, same!

Just talked to someone about some work that has popped up in Melb. Sounds alright but dont know............................

OT: also do the hot air baloon ride over the cbd Dale, if your into that sort of thing.

And go up the eureka tower- time it right to see day And night.

Hi. I did this in October 2009. See my thread about it, including planning, with lots of pictures on the last page.

GTR across the Nullabor - both ways

I would recommend using the BP and Shell websites to see which stations sell 98 octane fuel (if you need it). They are very good and give the kilometres to the next one, plus a map. (Which is fairly simple, given that there is one road for the main part!)

Also look at www.nullarbornet.com.au. That is a great website that gives distances between each town, plus information on places to stay, what to do, mudmaps around the areas, etc. Really good resource.

I found every one of the roadhouses to be really good. I did my own study of the ham, cheese and tomato toasty across Australia! All of the people at them were friendly and helpful, with only one exception in the whole trip. The best thing to consider, when judging any roadhouse or motel, is that you should remember that you are going into the back of beyond. If you are expecting them to be like city centre hotels and serve food and coffee to rival Melbourne cafes, you will be disappointed. Go with an open mind and you will be pleasantly surprised.

Places to visit: Streaky Bay on South Australia. Great little spot and only a short diversion from the main route. If you have the time, drive around the peninsular to Port Lincoln. It is supposed to be well worth it (but I have not been). And do the Great Ocean Road! Take a few days to do it and explore some of the smaller places.

Also, go to the Head of the Bight ranger station / tourist station. If the whales are around it is amazing and it is spectacular anyway.

I drove to Geelong in 4 days and then we took 6 days to drive back from Melbourne, but could have done with a few more days to explore. I am glad I did not take the train to Adelaide on the way East, but it would be a good option to reduce your time on the road, if you want to.

Ignore what people say about it being boring. It is the only way to see Australia. You don't experience anything from 35,000 feet! The towns, the people, the vast, changing vistas - it was an adventure that I intend to repeat some time. But maybe next time in the Land Rover, and maybe the GTR on a trailer to try out some of the Eastern States race tracks - now there's a thought!

Cheers. :cheers:

Well, after some hardcore negotiations, we have decided to alter the plans a little.

Since crossing the nullabor (in both directions) is going to take so much time out of the small amount of holidays I have available to me, we are now going to fly to Melbourne, hire a car and drive back as far as Adelaide (I didnt even know you could do one way car hire, but there you have it!) and take at least 5 days to do it, so all suggestions for between those 2 cities are now valid (and/or cool stuff to see and do outside of the CBD)

kgo

Mk2

Hi. I did this in October 2009. See my thread about it, including planning, with lots of pictures on the last page.

GTR across the Nullabor - both ways

Damn it! I was looking for this thread before I drove over from Adelaide Australia Day last year! In addition to all of the above, make sure you have good tyres on your car - I learnt the hard way!

Also, fuel is around $2 per litre (for 98) across the Nullarbor, and you won't always get 98. It is a drive I think everyone has to do at least once, and other than tyre blows both my 260RS and R34 GTR were a dream to drive. Oh, and one last thing, there's no mobile coverage from just out of Norseman until your across the Nullarbor, from memory it might have been nearing Ceduna but can't remember.

Some pics from my trip, my old man helped me drive the GTR over (and he's over 70!).

nullarbor_1_800.jpg

nullarbor_2_800.jpg

nullarbor_3_800.jpg

  • 3 weeks later...

Ceduna Pie Shop - Nothing even comes close!!!!!!!!!

If you dont stop there, you will remain dead to me!

This the one near the Shell Servo???

Dale the drive is awesome. As i did Perth to Mt Isa in a truck only a month or so ago i could not encourage you harder to do this!

Make sure you stop at the usual spots like border village for photos with Rooey II and Kimba for the big galah (might be a bit off the road for a car route....follow the truck route through town :) )

Id post pics up but they are too big apparently :(

Well, all of you have convinced me.

We have pushed the date back untill the end of the year, due to exams and stuff for the loinspawn, and then we will be heading off! I cant wait!!

So, questions that remain to be answered - has anyone done the ferry across the bay in SA? Worth it?

And what sort of date do people recommend? I am thinking before xmas, but maybe just on, or just after?

Obviously traffic wont be much of an issue for most of the driive, but should I avoid adelaide - melbourne between xmas and new years?

Well, all of you have convinced me.

We have pushed the date back untill the end of the year, due to exams and stuff for the loinspawn, and then we will be heading off! I cant wait!!

So, questions that remain to be answered - has anyone done the ferry across the bay in SA? Worth it?

And what sort of date do people recommend? I am thinking before xmas, but maybe just on, or just after?

Obviously traffic wont be much of an issue for most of the driive, but should I avoid adelaide - melbourne between xmas and new years?

I wouldnt bother being a tourist in vic over the holiday periods :)

I can send you heaps of amazing places that should be dead though... its just some areas will be chockers.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So, that is it! It is a pretty expensive process with the ATF costing 50-100 per 5 litres, and a mechanic will probably charge plenty because they don't want to do it. Still, considering how dirty my fluid was at 120,000klm I think it would be worth doing more like every 80,000 to keep the trans happy, they are very expensive to replace. The job is not that hard if you have the specialist tools so you can save a bit of money and do it yourself!
    • OK, onto filling. So I don't really have any pics, but will describe the process as best I can. The USDM workshop manual also covers it from TM-285 onwards. First, make sure the drain plug (17mm) is snug. Not too tight yet because it is coming off again. Note it does have a copper washer that you could replace or anneal (heat up with a blow torch) to seal nicely. Remove the fill plug, which has an inhex (I think it was 6mm but didn't check). Then, screw in the fill fitting, making sure it has a suitable o-ring (mine came without but I think it is meant to be supplied). It is important that you only screw it in hand tight. I didn't get a good pic of it, but the fill plug leads to a tube about 70mm long inside the transmission. This sets the factory level for fluid in the trans (above the join line for the pan!) and will take about 3l to fill. You then need to connect your fluid pump to the fitting via a hose, and pump in whatever amount of fluid you removed (maybe 3 litres, in my case 7 litres). If you put in more than 3l, it will spill out when you remove the fitting, so do quickly and with a drain pan underneath. Once you have pumped in the required amount of clean ATF, you start the engine and run it for 3 minutes to let the fluid circulate. Don't run it longer and if possible check the fluid temp is under 40oC (Ecutek shows Auto Trans Fluid temp now, or you could use an infrared temp gun on the bottom of the pan). The manual stresses the bit about fluid temperature because it expands when hot an might result in an underfil. So from here, the factory manual says to do the "spill and fill" again, and I did. That is, put an oil pan under the drain plug and undo it with a 17mm spanner, then watch your expensive fluid fall back out again, you should get about 3 litres.  Then, put the drain plug back in, pump 3 litres back in through the fill plug with the fitting and pump, disconnect the fill fitting and replace the fill plug, start the car and run for another 3 minutes (making sure the temp is still under 40oC). The manual then asks for a 3rd "spill and fill" just like above. I also did that and so had put 13l in by now.  This time they want you to keep the engine running and run the transmission through R and D (I hope the wheels are still off the ground!) for a while, and allow the trans temp to get to 40oC, then engine off. Finally, back under the car and undo the fill plug to let the overfill drain out; it will stop running when fluid is at the top of the levelling tube. According to the factory, that is job done! Post that, I reconnected the fill fitting and pumped in an extra 0.5l. AMS says 1.5l overfill is safe, but I started with less to see how it goes, I will add another 1.0 litres later if I'm still not happy with the hot shifts.
    • OK, so regardless of whether you did Step 1 - Spill Step 2 - Trans pan removal Step 3 - TCM removal we are on to the clean and refill. First, have a good look at the oil pan. While you might see dirty oil and some carbony build up (I did), what you don't want to see is any metal particles on the magnets, or sparkles in the oil (thankfully not). Give it all a good clean, particularly the magnets, and put the new gasket on if you have one (or, just cross your fingers) Replacement of the Valve body (if you removed it) is the "reverse of assembly". Thread the electrical socket back up through the trans case, hold the valve body up and put in the bolts you removed, with the correct lengths in the correct locations Torque for the bolts in 8Nm only so I hope you have that torque wrench handy (it feels really loose). Plug the output speed sensor back in and clip the wiring into the 2 clips, replace the spring clip on the TCM socket and plug it back into the car loom. For the pan, the workshop manual states the following order: Again, the torque is 8Nm only.
    • One other thing to mention from my car before we reassemble and refill. Per that earlier diagram,   There should be 2x B length (40mm) and 6x C length (54mm). So I had incorrectly removed one extra bolt, which I assume was 40mm, but even so I have 4x B and 5x C.  Either, the factory made an assembly error (very unlikely), or someone had been in there before me. I vote for the latter because the TCM part number doesn't match my build date, I suspect the TCM was changed under warranty. This indeed led to much unbolting, rebolting, checking, measuring and swearing under the car.... In the end I left out 1x B bolt and put in a 54mm M6 bolt I already had to make sure it was all correct
    • A couple of notes about the TCM. Firstly, it is integrated into the valve body. If you need to replace the TCM for any reason you are following the procedure above The seppos say these fail all the time. I haven't seen or heard of one on here or locally, but that doesn't mean it can't happen. Finally, Ecutek are now offering tuning for the 7 speed TCM. It is basically like ECU tuning in that you have to buy a license for the computer, and then known parameters can be reset. This is all very new and at the moment they are focussing on more aggressive gear holding in sports or sports+ mode, 2 gear launches for drag racing etc. It doesn't seem to affect shift speed like you can on some transmissions. Importantly for me, by having controllable shift points you can now raise the shift point as well as the ECU rev limit, together allowing it to rev a little higher when that is useful. In manual mode, my car shifts up automatically regardless of what I do which is good (because I don't have to worry about it) but bad (because I can't choose to rev a little higher when convenient).  TCMs can only be tuned from late 2016 onwards, and mine is apparently not one of those although the car build date was August 2016 (presumably a batch of ADM cars were done together, so this will probably be the situation for most ADM cars). No idea about JDM cars, and I'm looking into importing a later model valve body I can swap in. This is the top of my TCM A couple of numbers but no part number. Amayama can't find my specific car but it does say the following for Asia-RHD (interestingly, all out of stock....): So it looks like programable TCM are probably post September 2018 for "Asia RHD". When I read my part number out from Ecutek it was 31705-75X6D which did not match Amayama for my build date (Aug-2016)
×
×
  • Create New...