Jump to content
SAU Community

Recommended Posts

I have been running my C34 on E10 for years. It is tuned for it. I don't know if you will see any benefit if you don't have any means of tuning your car although it may clean up the fuel system. Tip: after running on E10 for 1000km or so change your fuel filter(s) as any gunk in the tank may have been liberated!

I am keen to change to E85 but its not readily available at the pumps and I'm not prepared to buy it by the drum as I could be stranded when away from home.

Link to comment
https://www.sau.com.au/forums/topic/393660-e10/#findComment-6260801
Share on other sites

My local united has no e10 anyone know of a station with e10 around rowville/ Knox area? Melbourne....

List of stations that have the Premium 100

http://www.unitedpetroleum.com.au/store-locator/fuels/Premium-100

Closest United Servos to Rowville

=3178&distance[search_distance]=20&distance[search_units]=km"]http://www.unitedpetroleum.com.au/store-locator?distance[postal_code]=3178&distance[search_distance]=20&distance[search_units]=km

Link to comment
https://www.sau.com.au/forums/topic/393660-e10/#findComment-6261824
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • all brand new unit from Tomei, fluid, bearings, etc. Tomei said they call it a 1.5 lsd because its 100 percent lock up under acceleration and 50 percent under deacceleration.  as I mentioned I used their fluid, install and their break-in procedure, (alot of figure 8's) but even when driving straight, or even slowly backing out of garage for first time, (at 2 mph) then driving to and from figure 8 parking lot, each tire in the rear would sporadically grab, skip, bounce, shutter and skip, shutter back a force I could feel causing clutch to slip then grab, at any speed. shaking entire car. I removed unit, since I put stock back in and all is fine, via process of elimination, its something with the lsd unit itself. I wasn't going to beat up the entire car more or change anything else for no reason as I had a feeling something in the lsd itself was wrong as everything was fine before this alone was installed and I rechecked over everything else after first time backing out I suspected an issue. I'll probably sadly already need new tires now just from trying to drive it 5 miles and performing the figure 8 break in. but if someone has any ideas I'm all ears 
    • Ok thanks..that was my second question if i can somehow bypass this even with Nistune(that is all i have right now...aparat from stock ECU. So with some aftemarket it can by "bypassed" or make it work?  I know there is Link or Haltech (mainly used). We have ECUmaster here so i will gather some info about it.
    • Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
×
×
  • Create New...