Jump to content
SAU Community

Recommended Posts

hey guys im wondering if any one else has had this issue and how you fixed it.. my s1 r33 is spitting and carrying on from around 4k almost till red line, ive used a hotter spark plugs before but that seemed to be a tempory fix. this time i went a temp range colder and its worse than before. im running 12 pound boost on the stock det wit jus a front mount and an exhust.

any help is much apreciated thanks gaz

Link to comment
https://www.sau.com.au/forums/topic/394331-rb25det-spitting/
Share on other sites

im thinking for the moment ill go back to the hotter plugs, and ill try winding the boost down... i have ran 14 psi thro it before with out any problems, (it jus kept hitting boost cut when it spiked).

i was thinking it could be a fuel issue but i have a feeling its more spark issue like the fuel isnt being ignighted properly :S

i have a malpassi adjustable fuel reg to put on i just need a fuel pressure gauge to put on it and i was told to do a bigger fuel pump to go with my new gt30 turbo.

i have also been told that possibly the injectors could be carboned up a lil. so they are spraying droplets instead of a mist (but this dosnt entirely make sense to me as the car has ran fine before with the hotter plug) but it does seem to foul them anyway (they carbon up then dont fire properly) wich is wat makes me think its a spark/fuel issue..... id like some one to confirm it really or tell me its a silly thing ive over looked, im not to familar with rb engines atm lol

Spitting and carrying on, you're either misfiring or lean popping. R&R will not cause splitting and sputtering. It pulls timing and pumps fuel. Misfiring will cause the car to spit, fart, splutter. Lean popping is the same kind of thing but you can distinguish lean pop from a misfire.

At 12 psi It will cause issues if it still does not fix the problem then install coilpacks

Ive had my car hit R&R when the old shit boost controller decided not to work. It wouldn't splutter, you just instantly lose all power. It revs perfectly fine, but makes no power. Spluttering is the symptom of another issue.

Running to rich will cause misfire. My mates 33 was hitting r&r at 10.5 pound it car misfiring and driving like shit turned the boost down 1 psi to 9.5 and it drove perfect after a plug change as they fouled up nothing else was changed now it pumps around town no prob

lean popping?? ive never heard a car do that before.. it is a diferent sort of popping to rich, but my bumper is black as from running rich lol so i didnt think running lean would be an issue.

i wound the boost down to 9 psi thismorning, jus driving around normaly is fine but when u pin it it still does it jus not as bad. i got new plugs that are slightly hotter and i have an adjustable fuel reg to put on, the timing did cross my mind to but i wasnt to sure

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That looks good, but I think you're going to need much beefier side skirts now.
    • They are daft and there's a reason it never caught on. Steering feel? We don't need no stinking steering feel!
    • I gotta pull you up on this. It's driving me crazy. A shutter is something that closes, like over a window or in a cmera. The word you want is shudder. That LSD is clearly f**ked. Take it to a diff shop and get it disassembled and examined by an expert. YOu might have plates welded together or something equally crazy.
    • Define "starting to fail". Wy not just rebuild them?
    • Check the Nistune doco. There are a few assumptions being made here that might not be valid. I will list the things that occur to me: Base map. Base map for what? Base map for Z32? Then the cranking pulse width is probably wrong for an RB25. The extra 500cc of capacity might well be enough to prevent it from catching. Base map for RB25? I don't think you can load one of those into a Z32. You have to just make the settings correct for an RB25 in the Z32 base map. That is either K or the TIM to get the pulsewidth right. Loom. You bought a loom for an RB. And you plugged it into a Z32 ECU. Did you make sure that any iwre differences were swapped. From memory, there's at least a couple. And as per the others, I would suggest making sure that the fuel pressure is correct while cranking and that the injectors are actually flowing as expected. They really must come out and go on the bench, unless you do find that you have messed up as per above points. I would also suggest watching in Nistune to make sure that everything is reading correctly. That the correct binary flags are raised at the right time (like the crank signal), that there's no stupid values in K or TIM. That you have not got mismatched firmware for the ECU and/or a wrong image loaded.
×
×
  • Create New...