Jump to content
SAU Community

Recommended Posts

Just got my car back from the work shop, has now got 270 degree cams an cam gears, an the insides of the cat were removed as it was chocked up, an some other unrelated mods.

Car now pops under decelleration with an occasional loud pop (backfire?) when i back off from full throttle, (full revs) to grab nxt gear or just slow down with an occasional flame coming out the back exhaust.. wondering wot people's thought are, is this normal or would it be hurting the engine? :ermm:

Link to comment
https://www.sau.com.au/forums/topic/394521-popping-on-decel/
Share on other sites

Having not cat will allow the popping and flames travel all the way to the end of the exhaust. The cat usually stops this and the sound.

The other thing is, if you have an ATMO BOV, aw well as AFMs. This creates a rich condition on decell, and you will get this same issue, but more likely stalls and fouled plugs. The car will eventually start running like crap.

Yer i have an atmo bov, always have, were on the car when i bought it 4 years ago, chnaged where it is so its closer to the intake an put a diff bov on but both were atmo bov's. dont use the z32's anymore since i got a vipec bout 2 years ago.

Did u mean the car will start running like shit if the plugs carbon up or for a diff reason? =s

Yer i have an atmo bov, always have, were on the car when i bought it 4 years ago, chnaged where it is so its closer to the intake an put a diff bov on but both were atmo bov's. dont use the z32's anymore since i got a vipec bout 2 years ago.

Did u mean the car will start running like shit if the plugs carbon up or for a diff reason? =s

If you have a Vipec and you're running a map sensor, then the ATMO BOVs shouldn't be a problem. I've never liked them because the cars were never designed to operate that way, but thats just me, I've always noticed cars run better with the plumb back ones on. But where there are heavy mods, it doesn't usually matter any more.

Also, after clearing your cat, you might need a tune.

When I mentioned the plugs fouling, that will only happen with ATMO BOV's and AFMs.

But as I said earlier, with no cats, you will always get popping and flames, because the cats always block this. Its also how a cop can tell if you have not cat - because you are blowing flames. A smart one will simply hear it via the popping.

Anyway, the short version - No cats = popping and flames.

Car has been tuned since, thinkin of gettin a new cat again.. got 3inch in let out let on current cat with a 3inch high flow cat, does anyone know if you can put a 4 inch cat into a 3inch exhaust? or does the diff size (3inch -4inch-3inch) mess up the air flow too much?

:ermm: Ritio, will ring them tomorrow, an guess ill have take it back to brisbane when i get a spare weekend.. an get them to strap it back on the dyno. hopefully for free.. already spent 1k on tuning for the cam, an cam gears.. cat was removed before tuning. i dont mind paying out my hard earned dollars to overcharging performance shops but when i do, i expect the jobs to be done perfect.. an get annoyed when things aren't because it means wasting a weekend to go down to brissie drop the car off, an if it cant be fixed immediatley finding a lift home an a lift back down to pick it up when its ready, or paying an employee to pick me up an drop me off, or sometimes its easyier if im busy to tilt tray it.. which is all a pain in the ass.+1 reason for buyin a stock xr6-t

Car has been tuned since, thinkin of gettin a new cat again.. got 3inch in let out let on current cat with a 3inch high flow cat, does anyone know if you can put a 4 inch cat into a 3inch exhaust? or does the diff size (3inch -4inch-3inch) mess up the air flow too much?

I have a 5in Venom 100 cell metal cat on a 3in exhaust - my theory is the bigger the cat the less the resistance.

I have a 5in Venom 100 cell metal cat on a 3in exhaust - my theory is the bigger the cat the less the resistance.

Running exactly the same as you mate, never had any issues and in my opinion you can't go to big on a turbo!

  • 4 weeks later...

took the car back, over run fuel cut was turned off, he turned it on.. but does it need setting up? seemed to have fixed the car for a while unless it was coincidence, just a slight popping on decel nothing major, but by that night it was back to back firing/shooting flames with a load bang, big enough so i could see the flames in my right hand mirror (exhaust is on the left) probably once in every 12 gear changes under full accelleration (when i back off to change gears) Could it be possible the computer turned it back off?? drove it last nite with a car load of ppl seemed to back fire every gear change under acceleration to some degree some very large, some not so big, all Very noticable..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • haha don't worry I'm sue you've got more fun ahead buying a 30 year old turbo car....but at least you are in the right place to ask
    • some days eh? The keyless entry and interior light on/off with the key will be controlled by the Body Control Module, but I'm not certain where that is or what it looks like (you might get lucky with a search to get a part#, which could be printed on it). I'd start at the A pillar/ Under dash/kick panel on the driver's side
    • It might be hit and miss, but Nissan Genuine Parts and Pitworks are not the same thing, although both are available from Nissan Dealers with Nissan Part Numbers. Nissan Genuine Parts are the OEM stuff, Pitworks are their attempt to get people back from generic parts makers
    • I did end up getting it sorted, as GTSBoy said, there was a corroded connection and wire that needed to be replaced. I ended up taking out the light assembly, giving everything a good clean and re-soldered the old joints, and it came out good.
    • Wow, thanks for your help guys 🙏. I really appreciate it. Thanks @Rezz, if i fail finding any new or used, full or partial set of original Stage carpets i will come back to you for sure 😉 Explenation is right there, i just missed it 🤦‍♂️. Thanks for pointing out. @soviet_merlin in the meantime, I received a reply from nengun, and i quote: "Thanks for your message and interest in Nengun. KG4900 is for the full set of floor mats, while KG4911 is only the Driver's Floor Mat. FR, RH means Front Right Hand Side. All the Full Set options are now discontinued. However, the Driver's Floor Mat options are still available according to the latest information available to us. We do not know what the differences would be, but if you only want the one mat, we can certainly see what we can find out for you". Interesting. It seems they still have some "new old stock" that Duncan mentioned 🤔. I wonder if they can provide any photos......And i also just realized that amayama have G4900 sets. I'm tempted too. 
×
×
  • Create New...