Jump to content
SAU Community

Recommended Posts

  • Replies 100
  • Created
  • Last Reply

Top Posters In This Topic

PUt mine on dyno ready for e85 and clutch slip so lucky i had a spare nismo twin sitting at home , put in this week and try again :)

but to fair you knew it was going to happen cant wait to hear the exhaust on dyno going to loud bouncing off the wall.

can anyone suggest some cams for the more lumpier sound?

have a fully rebuilt engine -5s etcL

Lol you don't buy cams cause u want a lumpier sound......

Get your tuner to lean it out at idle, and I think they do something with timing. There's ways to make em sound lumpy, if that's what your into

With the piping going smaller wouldnt that cause a bottle neck in your exhaust flow? Especially if your after big power? Im currently looking at getting this aswell but i dont want any bottle neck's in my set up.. I'll be running 20+psi and will be looking at trying to max out my -5's on E85.

With the piping going smaller wouldnt that cause a bottle neck in your exhaust flow? Especially if your after big power? Im currently looking at getting this aswell but i dont want any bottle neck's in my set up.. I'll be running 20+psi and will be looking at trying to max out my -5's on E85.

Im going e85 0n my -5s now to , i have hpi dumps , sunline ti front pipe , and the tomei ti cat back , i dont think there will be any restriction but i will tell you in a few days and post a vid of it at full noise on dyno :)

Im going e85 0n my -5s now to , i have hpi dumps , sunline ti front pipe , and the tomei ti cat back , i dont think there will be any restriction but i will tell you in a few days and post a vid of it at full noise on dyno :)

Please do mate! Seems like we are bothi doing the same thing. I also have HPI dumps, 3.1 front pipes (Non Ti) currently on the hunt for a cat-back and i will be going for my E85 tune.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...