Jump to content
SAU Community

Recommended Posts

I have been googling away the past week trying to get a decent snap shot of the brands of semis slicks used these days. I have not considered the likes of the Federal 595RSR as a semi slick, though they are a very good tyre.

Their are loads out there and in the 17" diameter range you seem able to get them for $300-350 a tyre vs the $550 that Yokohama and Dunlop wants for their tyres. (I have used a 255/40/17 as the baseline tyre for comparison)

So I have not gone into huge details, just the brand and links. If people have used any of the more obscure models then be great if you could post feedback or results of any decent OS tyre tests you have come across.

Dunlop

DZ03G

Dunlop DZ03G Link

Comment - Seem to be recognised as almost being as quick as the AO50, but like all Dunlops good in the wet and quiet.

Bridgestone

RE55

http://www.bridgestone.com.au/tyres/motorsport/RE55s.aspx

Comment - Still decent enough things though really need to roll out an update. No idea what is happening with the RE-11S

Yokohama

AO50

http://www.yokohama.com.au/motorsports/

Comment - Almost the track day standard tyre in Aus. Great grip but grossly expensive at ~$550

Nitto

NT01

http://www.nittotire.com/Tire/nt01#size

Comment - Seem insanely cheap at $350 a tyre

Michelin

Pilot Super Sport

Michelin Motorsport page

Comment - Said to have almost Pilot Sport Cup level of grip

Pilot Sport Cup

Micheline Pilot Cup site

Seem to be the rage for the best road tyre you can put on fast track/street cars

Federal

FZ-201 & FZ-202

http://www.federalmotorsporttires.com/index.php?page=fz-201

Comment - Up around the $500 a corner and not a great range of sizes available.

Kuhmo

V70A

http://fsport.com.au/kumho_v70a.html

Seem to be used a bit on control tyre circles

Toyo

Proxes R888

http://toyotires.com/tire/pattern/proxes-r888-high-performance-competition-tires

Seem to be better at shorter events like hill climbs where grip is there from near cold

Hankook

Ventus TD Z221

Hankook Motorsport page

Comment - Seem popular in the US. AO50 type money and look to be of equivelant performance to AO50 for sprints

Silverstone

FTZ Sport Type RR

Dealer link

Similar pricing to Nitto, ~$250.

Link to comment
https://www.sau.com.au/forums/topic/395003-circuit-semi-slicks/
Share on other sites

Roy,

while your comments on the 050 costs are valid, the feedback I'm hearing from the IPRA guys is that they heat cycle very well, and maintain grip almost down to the canvas. In those terms, if you look at $ per useful km their cost isn't that bad. Compared to the 048, these are cheaper, but they lose tremendous grip after only a handful of heat cycles. A lot of guys will get rid of tyres once they start going off, often with lots of meat still left on them. If you can get useful life out of a tyre, then its cost over a season might not be as high (specially if you want to be at the pointy end of the field)

Food for thought.

boxheadmr, I tried a set of slicks for the same reason. cheaper and yes they turned out faster by 9 tenths at Lakeside. Kumho S700 slicks 58.9 vs Toyo R888 semis 59.8. There was almost certainly more time in the slicks because I ran that time with a stock viscous diff, single spinning everywhere. Took a few laps to really get them up to temp, but when they were, the cornering grip was awesome! But they didn't heat cycle well. Next day there with a shimmed diff, I was 2 tenths slower and suffered a blowout on the front. Next track day I had aother front blowout and the other front delaminated. So don't buy Kumho slicks is my tip! I always felt like I was cheating on slicks too.

Roy, you should be able to get the Federal FZ201 much cheaper than $500. They were about $100 cheaper when i bought them and have heard they're cheaper now - but that was the old 'mate of a mate' story... Mine have done 9 days of sprints and hillclimbs on 2 different cars, and still going strong - probably another 4 or 5 days in them and they're still getting me PBs. So heat cycling is not a problem and they're wearing well. I've got the mediums. They are VERY wide for their size - the 255/45x17's overall width is about 275 and tread width is almost 265. I bought 10" wheels for them because they were bulging so much on 9s.

Pic of 255 on 10" and 235 on 9":

425583_257513767658531_119330041476905_582232_1009404181_n.jpg

R888 I used to hate them when I had them, because they felt gripless. But they got decent lap times if you were prepared to use a fair bit of slip angle. They are cheap, durable and heat cycle well - never lost any pace over their life span of a couple of years.

All evidence says Nitto = Toyo with a different pattern.

Edited by hrd-hr30

Nitto is a brand division of Toyo Tire (USA) Corp. http://www.toyojapan.com/cgi-bin/column/data/release/1119852599.html

They have the same construction, and use the exact same picture in their marketing - the only difference is the tread pattern. They have the same 100UTQG rating, and they are made in Japan with the Toyos.

eurp_0510_02_z+nitto_nt01_tire_launch+cross_section.jpg

r888_construction.gif

lol, ditto is a good name for them!

Edited by hrd-hr30

interesting stuff, the R888's i used to use donkeys ago but found the A050's and even the RE55's to be a better tire.

I know it looks like the photo is the same but you would have to think that seeing as the R888's have been around for so long that the Nitto's would be an "updated" version?

Off-topic slightly but last week i bought a brand new set of hoosier slicks in 13 inch for my little american legend car for $95ea. They are oval track tyres, but $95ea for fresh slick rubber as opposed to the $50ea ive been paying for 1.5yr old semi's, im stoked!

Roy, you should be able to get the Federal FZ201 much cheaper than $500. They were about $100 cheaper when i bought them and have heard they're cheaper now - but that was the old 'mate of a mate' story... Mine have done 9 days of sprints and hillclimbs on 2 different cars, and still going strong - probably another 4 or 5 days in them and they're still getting me PBs. So heat cycling is not a problem and they're wearing well. I've got the mediums.

I can get them for $1200 from OS, so looking at that . The wear is encouraging, can you gauge their outright pace against other tyres you run or similar modded cars? Are they quicker then RE55s? Equiv to AO50s? I read they are quicker then R888s

That's very good buying Richard! You probably know, but Nev and I are hitting Lakeside April 5

interesting stuff, the R888's i used to use donkeys ago but found the A050's and even the RE55's to be a better tire.

I know it looks like the photo is the same but you would have to think that seeing as the R888's have been around for so long that the Nitto's would be an "updated" version?

NT01 is nothing new either.

It looks like the photo is the same because it is the same :P If they cbf spending 30min to make a new pic of it's different construction, what makes you think they'd spend time developing a new construction and retooling to make a new tyre and then sell it cheaper than the R888?

But for the money they're going for, they're definitely worth a try. In fact, at the price I saw just now I might buy some this payday! I don't mind sliding around a bit to get the times if I have too.

oh i thought the nitto was released in 2006 vs the R888 that was late 1990's early 2000's so compound changes would be something i thought might change.

Would not mind hearing back about how you go trying them - where was the "cheap" price from?

Edited by boxheadmr

I can get them for $1200 from OS, so looking at that . The wear is encouraging, can you gauge their outright pace against other tyres you run or similar modded cars? Are they quicker then RE55s? Equiv to AO50s? I read they are quicker then R888s

Hard to say. I had a set of RE55S and loved them, but that was 5 or 6 years ago on a very different car - GTR.

They are available in soft compound too. Can't remember how much faster Paul was on the softs compared to the mediums.

Can't speak for pace compared to A050 because so few people use them up here, but I very much doubt they are equivalent to them! From what I hear, its A050 and that Hankook semi, then the DZ03 which was the pace setter for a few years, then the rest... I'd say these are up there with the best of the rest.

I do have a mate with a 206rwkw Sil80, stripped out, with basic aero and alot of setup work on corner weighting etc... and he's a self-confessed data nerd so pretty much everything is optimised, but its still a real budget car. Anyway, he runs 2.5 sec faster than me at Lakeside on these FZ201s. So who knows...

oh i thought the nitto was released in 2006 vs the R888 that was late 1990's early 2000's so compound changes would be something i thought might change.

Would not mind hearing back about how you go trying them - where was the "cheap" price from?

maybe we're a bit behind, but I remember the RA1 was the benchmark hillclimb tyre up here in the early 2000's. The R888 took over from it around 2004 or something, and was universally hated by hillclimbers.

cheap price is on ebay - probably shooting myself in the foot, but its $249ea for 255/40x17 NT01 with 2011 manufacture date.

Edited by hrd-hr30
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Bit of an update to this one. Having some issues on the dyno that held us back (boost spiking) and I want to pass some info over you guys and see what you think is wrong with my setup. The current readout on this dyno is 462rwkw on a low reading dyno so keep in mind it is a real world 500rwkw setup on a hub dyno. Don't read into the power figure too much as a sign of the issue. The short and curly of it is: 2.8 Litre Racepace build RB25 NEO N/A Head with VCT (internally standard however ) Borgwarner EFR 8474  Turbosmart 50mm Straight Gate + Mac valve 6Boost Manifold 4" dump to full 4" exhaust (nil restrictions) Wastegate plumbed back in and all angles in the exhaust system are acceptable and not too sharp. GFB SV52 BOV in cooler piping  Turbosmart BOV in EFR Housing   The issue we are having is it comes onto full boost for example at 4000rpm and spikes to 24/25psi, before dropping down to 17psi before slowly rising back up to the target boost of 23psi. It was extremely uncontrollable and the tuner actually had to ramp in boost progrssively with each 1000rpm on each boost setting we selected to try and reduce the amount of spiking. Sometimes we would see a drop of 10psi from the peak at the beginning of the run, to the low, until it took the next 500-1000rpm to stabilise back up to the target boost. The tuner is pretty confident that the straight gate is just a poorly designed product and leaks too much boost upon cracking the gate open and theres no way to fix it other than going to a poppet valve. He's also confient theres no ignition breakdown or floating valves. The fueling is extremely stable as well. Turbo speed is somewhere around the 109,000rpm area. The spanner in the works for me is that prior to this Borgwarner and StraightGate, the car was tuned on -5 twins at a diferent tuner, and he also had issues controlling the boost with it spiking around the same rpm range, so to me this sounds like the same issue and it can't be anything on the turbo side as this was all changed and I think the behaviour is extremely similar, if not the same. We also removed the mac valve and did a run on wastegate pressure and it still spiked and had the same behaviour. My thoughts on possibilities are: Boost Leak VCT Cam Gear isn't reliably activating consistently - (On this however, we did a run with the VCT disabled and the boost still spiked) Turbosmart BOV is not handling the boost? However this seems unlikely to not be able to handle 20psi. I have a couple of logs that I can't make sense of if anybody knows how to read them and can obtain further logs of other parameters if they are not enough, happy to pay for anyones time. The dyno readout with the power figure is the most recent last week. The other picture is from two weeks prior to that where we couldn't break 400kw (we removed the cat), however the issue of the boost control persisted. @Lithium @Piggaz @burn4005 @GTSBoy @discopotato03 I've tagged those that were quite active in recent pages here, no disrespect to those that know turbos well but I missed tagging. Cheers 
    • I recently purchased a 2018 Infiniti Q60, which has an SD card navigation map. I can see my system has options for real time traffic updates etc, and am wondering if there is something I can purchase to get this working? I can see there are at least updated maps for USA and Canada, but nothing for Australia. Surely Infiniti took changing road systems and city expansions into account when they decided to use an inbuilt navigation over Android Auto/Apple Car Play, or are we doomed to drive on streets that don't exist in the navigation system if you drive to a new area?
    • Luckily I didn't put in etch primer as I just found out it's not compatible with my body filler lol. Also just need to sand the panel anywhere between 150-400 grit so I'm in the clear there. It does say to not apply to soft old paint, I assume that means paint that is flaking, peeling,etc
    • @dbm7 and @GTSBoy thank you both very much! will give that a shot!
×
×
  • Create New...