Jump to content
SAU Community

Recommended Posts

Hmm ok. That does look a lot lighter then the momo steering wheel option.

There was a couple of options for woodgrain. The options catalogue in this post has them:

http://www.skylinesaustralia.com/forums/topic/293993-m35-stagea-sales-brochures-books/?p=4908287

There was a couple of options for woodgrain. The options catalogue in this post has them:

http://www.skylinesaustralia.com/forums/topic/293993-m35-stagea-sales-brochures-books/?p=4908287

Ahh cool, I hadn't seen that. And I finally can see my suspension is a Nissan option upgrade. Wish I knew what it said about the suspension. Also it's good to see I literally have every option I would have wanted from that book.

Little bit over two weeks to go. Getting excited but very nervous at the same time.

Gathering the stuff ready in two crates ready. Just have to buy oil and filter and im set.

Big thanks to Travis (one of the few non Vtards) who found me the missing bits of trim for my.option momo that someone on here sold me and has not been helpful at all. I think some of you know who it is.

Also looking for the woodgrain door grab trim strips. Would also be keen on a black leather/woodgrain gear shifter to match but not fussed.

#NF

Good to hear you found the pieces for your wheel mate.

In Aaron's defence, he's not actually on this forum; nor has he ever been.

When he stripped the car, his father kicked him out of his home, and had the partially dismantled car removed by Simsmetal and immediately destroyed.

I'm not saying you shouldn't feel hard done by; but I can assure you, he had far more important things to worry about than some covers for your steering wheel.

If he'd had the pieces, I believe he would have given them to you.

He is a stand-up guy, and a good friend of mine.

Glad to hear it's getting toward the end, you must be pumped.

Would have been nice of he told me that the covers were missing to begin with. Otherwise i wouldnt have bought it.

I asked him for the VIN or any form of identification of the car so i could goto nissan and get the parts.

Dont get me wrong hes a nice guy the emanage was a complete steal and im happy but the whole steering wheel thing wasnt right.

But hey whats done is done

Yes there are two different colours of "woodgrain" the lighter and more common tan colour and there is a dark chocolate almost black colour which i am yet to see in the flesh.

I rang nissan for all four trims and shifter ans it came to about 900. Got onto amayama and it was 476.

Getting pretty pumped!

The part numbers might be on the back of the hand grabs...

Also If you get a VIN with the optioned parts and put them into epcdata you might find the option.

*EDIT* I had a quick look could only find http://www.ebay.com.au/itm/03-04-05-Infiniti-G35-door-panel-wood-trim-grip-handle-/230775342365

Which I believe is only half of what you need :(. epcdata showed f**k all.

I asked for the model code and VIN of the car the wheel came off with no luck. But im sure many of you have seen that gold 2004 arx that can not be complied om ebay atm. It has a momo wheel, he put a picture up of the build plate and from that i rang Lake macquarie nissan here in newcastle with unable (or to lazy to use google translate) i rang hornsby NIssan and they gave me a rough quote of 900 for all four trims and shifter posted to aus. Was provided with part numbers and went on amayama and got quoted 476 without postage.

But josh the ones you linked us too i found on import monster which are for 47 so they will be getting watched closely.

http://page16.auctions.yahoo.co.jp/jp/auction/u63246415

Ha looks like there are 3 different colours.

I want that colour! If i find a momo in that id do that. It wont stand out like dogs balls like the one i have will. Ohwell.

I want that colour! If i find a momo in that id do that. It wont stand out like dogs balls like the one i have will. Ohwell.

Maybe get a set of these; it'll draw peoples attention away from the dogs balls.

rarewheels.jpg

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...