Jump to content
SAU Community

Recommended Posts

Going through and reading pages on pages of info, I'm getting confused...

With basic bolt ones, injectors, exhaust, power fc etc

Which GTR is the quickest straight line? 32 33 or 34?

Does it just come down to the 32 being the lightest? Or does the 34 make up for it being newer etc etc??

Link to comment
https://www.sau.com.au/forums/topic/396726-gtrs/
Share on other sites

Going through and reading pages on pages of info, I'm getting confused...

With basic bolt ones, injectors, exhaust, power fc etc

Which GTR is the quickest straight line? 32 33 or 34?

Does it just come down to the 32 being the lightest? Or does the 34 make up for it being newer etc etc??

Yes you certainly are confused.

The one with the most power/torque and least weight will win if all other variables are the same.

Link to comment
https://www.sau.com.au/forums/topic/396726-gtrs/#findComment-6300690
Share on other sites

No of course kw all being the same etc. But if you bolt the same mods on each of the models you won't get the same torque and kws correct?

Then take weight into account etc??

Lol can't afford a 35 and not keen on a 31...

32 33 or 34

Link to comment
https://www.sau.com.au/forums/topic/396726-gtrs/#findComment-6300702
Share on other sites

No of course kw all being the same etc. But if you bolt the same mods on each of the models you won't get the same torque and kws correct?

There is no golden answer other than this:

The one with the most power/torque and least weight will win if all other variables are the same.

Link to comment
https://www.sau.com.au/forums/topic/396726-gtrs/#findComment-6300792
Share on other sites

I kno each car would be different car from car even in the same model.

But there must be something like a tune with basic bolt ones a 34 will be quicker or the 32 won't have as many kws but much lighter. So quicker in a straight line and on the track etc

Link to comment
https://www.sau.com.au/forums/topic/396726-gtrs/#findComment-6300811
Share on other sites

this is my personal view on the topic...

if all 3 were brand new and had identical mods done, including supporting mods, they would all end up with about the same power.

if you then gave them all the same power, same gear ratios, same WEIGHT - then they will go as well as either or.

so in the end, engine condition, weight, ratios in no order make up the winning combo assuming power is equal.

k, done. lock.

Link to comment
https://www.sau.com.au/forums/topic/396726-gtrs/#findComment-6300835
Share on other sites

Yer but do you need more money and parts to make a 32 rb26 put out the same as a r34rb26?

What I'm saying is I spend $2000 on a power fc some injectors and a tune and your saying all 3 models will put

Out roughly the same kws? Etc

Link to comment
https://www.sau.com.au/forums/topic/396726-gtrs/#findComment-6300842
Share on other sites

What's so good about the 33 system?

Exhaust manifolds, aftermarket dumps and front popes are common between all 3 ( except for the O2 sensor bung sizes in the 32 and EGT temp probe in the V Spec and above versions of the 34). It's common knowledge that a 33 GTR cat back will bolt into a 34 with a few minor hanger changes and a bee's dick shorter.

So, where does this magical 30 HP come from?

Wouldn't it also depend if it was a 300 HP car or a 1300 HP car?

Link to comment
https://www.sau.com.au/forums/topic/396726-gtrs/#findComment-6300845
Share on other sites

So, where does this magical 30 HP come from?

The cosmos of course

I kno each car would be different car from car even in the same model.

But there must be something like a tune with basic bolt ones a 34 will be quicker or the 32 won't have as many kws but much lighter. So quicker in a straight line and on the track etc

How?

The R34 is heavier. The R33 is heavier.

So once again....

The one with ... least weight will win if all other variables are the same.

Link to comment
https://www.sau.com.au/forums/topic/396726-gtrs/#findComment-6300873
Share on other sites

What's so good about the 33 system?

Exhaust manifolds, aftermarket dumps and front popes are common between all 3 ( except for the O2 sensor bung sizes in the 32 and EGT temp probe in the V Spec and above versions of the 34). It's common knowledge that a 33 GTR cat back will bolt into a 34 with a few minor hanger changes and a bee's dick shorter.

So, where does this magical 30 HP come from?

Wouldn't it also depend if it was a 300 HP car or a 1300 HP car?

L2belessserious

Lol

Link to comment
https://www.sau.com.au/forums/topic/396726-gtrs/#findComment-6300877
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hard to say, just pop the rocker covers off and have a look if you think it's cammed. You probably need to replace the valve cover gasket/half moons anyways.
    • From my youth: GTi-R clutch change is a massive pain. The gearboxes are fragile? But the car is super cool and I want one 😢 
    • Remember this is 1988 tech.
    • Driveline vibration is resolved. I ended up loosening all my engine mount and trans mount bolts, giving it a good shake then retightening everything and it's gone... Let's just say I was surprised that fixed it.  I've been happily driving it around again but unfortunately put zero time into my direct port/constant pressure WMI setup. I'm on vacation next week, so I'll try and finalize it then.  On a different note, I spent all week fuel/ignition mapping 2x 216L V16 engines. Turbo's were burning glycol and we swapped them out for larger units. We also had planned emissions testing on site, so I figured I'd be there the same week to use their instrumentation and massage any emissions issues out if needed. This was a first for me. Fuel management is similar in certain ways to automotive (i.e air density as load variable) but very different in others. It's all PLC based and AFR's are controlled by air and not fuel. They use a control valve between the turbo and air manifold to control pressure which in turn controls AFR's. Due to this, target AFR tables supplied by the OEM are in pressures and not mass which really through me off. They use air pressure vs fuel pressure tables. I also relied on an O2 concentration sensor the emissions team had in the exhaust. Ignition timing was also all over the place and we were losing a fair bit of power. They're now happily sitting at 16-40BTDC depending on load. We were making about 1600kw at 900rpm at 90% load. Engines were running a lot smoother as well.    
    • heh, aint no R32 ever meeting modern targa cage rules unless the driver is veeeery short OP, good luck with the sale, since its already in the land of freedom I'm sure you will find a good buyer.
×
×
  • Create New...