Jump to content
SAU Community

Recommended Posts

Going through and reading pages on pages of info, I'm getting confused...

With basic bolt ones, injectors, exhaust, power fc etc

Which GTR is the quickest straight line? 32 33 or 34?

Does it just come down to the 32 being the lightest? Or does the 34 make up for it being newer etc etc??

Link to comment
https://www.sau.com.au/forums/topic/396726-gtrs/
Share on other sites

Going through and reading pages on pages of info, I'm getting confused...

With basic bolt ones, injectors, exhaust, power fc etc

Which GTR is the quickest straight line? 32 33 or 34?

Does it just come down to the 32 being the lightest? Or does the 34 make up for it being newer etc etc??

Yes you certainly are confused.

The one with the most power/torque and least weight will win if all other variables are the same.

Link to comment
https://www.sau.com.au/forums/topic/396726-gtrs/#findComment-6300690
Share on other sites

No of course kw all being the same etc. But if you bolt the same mods on each of the models you won't get the same torque and kws correct?

Then take weight into account etc??

Lol can't afford a 35 and not keen on a 31...

32 33 or 34

Link to comment
https://www.sau.com.au/forums/topic/396726-gtrs/#findComment-6300702
Share on other sites

No of course kw all being the same etc. But if you bolt the same mods on each of the models you won't get the same torque and kws correct?

There is no golden answer other than this:

The one with the most power/torque and least weight will win if all other variables are the same.

Link to comment
https://www.sau.com.au/forums/topic/396726-gtrs/#findComment-6300792
Share on other sites

I kno each car would be different car from car even in the same model.

But there must be something like a tune with basic bolt ones a 34 will be quicker or the 32 won't have as many kws but much lighter. So quicker in a straight line and on the track etc

Link to comment
https://www.sau.com.au/forums/topic/396726-gtrs/#findComment-6300811
Share on other sites

this is my personal view on the topic...

if all 3 were brand new and had identical mods done, including supporting mods, they would all end up with about the same power.

if you then gave them all the same power, same gear ratios, same WEIGHT - then they will go as well as either or.

so in the end, engine condition, weight, ratios in no order make up the winning combo assuming power is equal.

k, done. lock.

Link to comment
https://www.sau.com.au/forums/topic/396726-gtrs/#findComment-6300835
Share on other sites

Yer but do you need more money and parts to make a 32 rb26 put out the same as a r34rb26?

What I'm saying is I spend $2000 on a power fc some injectors and a tune and your saying all 3 models will put

Out roughly the same kws? Etc

Link to comment
https://www.sau.com.au/forums/topic/396726-gtrs/#findComment-6300842
Share on other sites

What's so good about the 33 system?

Exhaust manifolds, aftermarket dumps and front popes are common between all 3 ( except for the O2 sensor bung sizes in the 32 and EGT temp probe in the V Spec and above versions of the 34). It's common knowledge that a 33 GTR cat back will bolt into a 34 with a few minor hanger changes and a bee's dick shorter.

So, where does this magical 30 HP come from?

Wouldn't it also depend if it was a 300 HP car or a 1300 HP car?

Link to comment
https://www.sau.com.au/forums/topic/396726-gtrs/#findComment-6300845
Share on other sites

So, where does this magical 30 HP come from?

The cosmos of course

I kno each car would be different car from car even in the same model.

But there must be something like a tune with basic bolt ones a 34 will be quicker or the 32 won't have as many kws but much lighter. So quicker in a straight line and on the track etc

How?

The R34 is heavier. The R33 is heavier.

So once again....

The one with ... least weight will win if all other variables are the same.

Link to comment
https://www.sau.com.au/forums/topic/396726-gtrs/#findComment-6300873
Share on other sites

What's so good about the 33 system?

Exhaust manifolds, aftermarket dumps and front popes are common between all 3 ( except for the O2 sensor bung sizes in the 32 and EGT temp probe in the V Spec and above versions of the 34). It's common knowledge that a 33 GTR cat back will bolt into a 34 with a few minor hanger changes and a bee's dick shorter.

So, where does this magical 30 HP come from?

Wouldn't it also depend if it was a 300 HP car or a 1300 HP car?

L2belessserious

Lol

Link to comment
https://www.sau.com.au/forums/topic/396726-gtrs/#findComment-6300877
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
×
×
  • Create New...