Jump to content
SAU Community

Recommended Posts

Hi,

PM sent - correct the ID's are actually EV'14's just flow matched by injector dynamics. Not sure about the milling though as I haven't heard of it.

- Brendan

  • Replies 191
  • Created
  • Last Reply

Top Posters In This Topic

Hi,

PM sent - correct the ID's are actually EV'14's just flow matched by injector dynamics. Not sure about the milling though as I haven't heard of it.

- Brendan

Can you please also PM me a price for the ID 1000cc injectors to suit an R34 GT-T, with the plugs. I'm looking for something that is pretty much drop in on the standard fuel rail.

Thanks

Justin

Can you please also PM me a price for the ID 1000cc injectors to suit an R34 GT-T, with the plugs. I'm looking for something that is pretty much drop in on the standard fuel rail.

Thanks

Justin

Hi,

These would not be a direct fit as they are universal injectors, but with extensions and plug's I can do 6x 1000cc EV14's for just $630 incl. delivery! These are readily used on the R34's so installation is no major issue if using an experienced workshop.

- Brendan

  • 4 weeks later...

Hi mate I'm looking for some E85 1000cc injectors to run in a BNR32 with 11mm HKS rail, SARD regulator & warlbro 450lph pump, cheers.

Hi mate I'm looking for some E85 1000cc injectors to run in a BNR32 with 11mm HKS rail, SARD regulator & warlbro 450lph pump, cheers.

Hi,

I would go with the BOSCH EV14's 1000cc top feed injectors. They are E85 compatible and come with extensions to suit 11mm o-ring.

Can do 6x with extensions and USCAR plug for $630 incl. delivery

- Brendan

  • 1 month later...

Hi

Chasing some prices on 700-800cc injectors for RB25 (Side Feed)

May be interested in going top feed if there is a good deal on a package however :)

Thanks

Hi,

The side feeds would be $150/injector so if you can go top feed that would save a lot of $$$!

Top feed BOSCH EV14's 1000cc are $640 incl. delivery for 6x which include the extensions and plugs.

- Brendan

Hi,

The side feeds would be $150/injector so if you can go top feed that would save a lot of $$$!

Top feed BOSCH EV14's 1000cc are $640 incl. delivery for 6x which include the extensions and plugs.

- Brendan

Hi Brendan

Thanks for that, so with the injectors, extensions and plugs they are pretty much plug and play (minus the rail of course) or do they need the resistor pack?

Thanks

Callan

Hi,

They are practically plug-and-play but you would need to contact a workshop to get specifics on what else may be required.

These have been widely used on the R33's so certainly no major task as all.

Also note these are the same injectors as used by injector dynamics!

- Brendan

  • 1 month later...

hi there I am after a set of injectors for 450kw gtr im thinking id2000? How much for 6 with the required adaptors to fit stock fuel rail and connectors I assume they are not plug and play and need some work from the tuner?

Scott

hi there I am after a set of injectors for 450kw gtr im thinking id2000? How much for 6 with the required adaptors to fit stock fuel rail and connectors I assume they are not plug and play and need some work from the tuner?

Scott

PM Sent :yes:




  • Similar Content

  • Latest Posts

    • Sorry to hear your HFM BM57 was faulty,  did you contact HFM I would hope they would be at least grateful for the information if there was some sort of manufacturing fault, you would hope they would be sympathetic even if your item was 2 years old if it had never been fitted. May I ask where it leaked from ?
    • Cats are called Bella, and Donna...  Like that poisonous plant And I remember your 2 monsters, I remember making a little bit of wee when you let them out... LOL I have already installed cat doors into the laundry where their kitty litter is, and the sun room, apart from the cat doors there's not going to be any permanent mounted stuff on the interior walls (interior doors are cheap and easy to replace) I will get a outdoor cat cage thingie once I finish the landscaping out back... https://catnip.com.au/ The only off limit areas are the main bedroom and the gym room....but, currently the cats are curled up in bed, in the main bedroom with the Mrs.....LOL, the off limits for the kittens to the main bedroom lasted about 5 minutes with Jackie I currently only have 1 free standing huge cat tree multiple level scratching post thingie in the lounge room, but, I will be getting another one soon now that I'm happy with the furniture layout in the back room and have a perfect spot for it  
    • All of this is making it seem clear that running the Coppermix twin was definitely the way to go, especially in hindsight with how insane tariffs have gotten and the strength of the USD vs yen at the time.
    • That sounds like no chance of even importing one for road registering then Now I see why Duncan wants to check LHD rules for Targa...   I wonder how "bolt in" the AWD would be if you got one imported from the US and swapped it to an AUD one
    • Not to mention they drive like a bucket of bolts! yuck!
×
×
  • Create New...