Jump to content
SAU Community

Recommended Posts

  • Replies 7.5k
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Hostile when i waved i nearly hit the car in front of me. I didn't notice it stop, thank god for good brakes. I think i need to use that inside lane a s you always come from nowhere and dissapear into the distance while i never seem to move >_<

Yep for sure... the inside lane is always movin well cept for buses!! I always stay inside and change after the split for Ayliffes rd. Only a few km from there to work for me!

ok who was the fool who decided to fishtail it out of bp servo at pooraka. i was driving past there this morning to work, he must have seen me and wanted to prove a point. roads were wet at the time, he exited the servo driving on the limiter, i could hear it bouncing off the rev lim. seriously, its ppl like YOU who get us targeted. was a marron r33, wasnt you was it redgtst?? raises eyebrow*

WTF why does every one think that as soon as a Maroon car does a chirpy or something that it is automatically me!!!! Thr fricking cops do it tooo, one guy said he recognised my car and i had never even frickin seen the dick b4.

As for being at Pooraka WTF i would not be seen dead out there! my ride would get stolen in Boganville.

Hmmmmm -SKYLINE-?????

hmmm :) yep that was me!!! i nailed it in second until i noticed that there was water on the road from the sprinkler system......... damn council..... watering grass at 10pm at night!!!

Spotted Marron R33, with unpainted front bar, turning right into Grand Junction Rd from Pt Wakefield Rd south-bound.

Spotted (drove behind him) Black R32 with BN/Vertex kit heading north up Main North @ cnr of Diagonal.

was @ bosotworx today having timing belt done and a dyno tune after that tony had to put my front tailshaft back in and he jacked it right up on the troley jack and he said that how u want it launhing @ the drags fron wheel in the air :whistling: i thought it looked a bit kool to i got my camera and took a photo ... but i accidently had the camera set wron and it came out better than i expected :laugh:

post-13315-1152873704.jpg

oh enough to bring the front wheels off the ground :whistling:

on a 3rd run he got 175rwkw and stopped short cause it was leaning out

i also got a leak on the plenum so need a new gsaket and need to find a air leak shaun said u only loose about 5kw through the transfer case

oh first run was 140 rwkw (thats how sick it was)

and he said it looks like the guy that got it turbo'ed didnt just wack a turbo on the DE motor that he put a DET engine in so i can prolly run 14psi when i get the rest sorted

Edited by Madaz
oh enough to bring the front wheels off the ground :whistling:

on a 3rd run he got 175rwkw and stopped short cause it was leaning out

i also got a leak on the plenum so need a new gsaket and need to find a air leak shaun said u only loose about 5kw through the transfer case

oh first run was 140 rwkw (thats how sick it was)

and he said it looks like the guy that got it turbo'ed didnt just wack a turbo on the DE motor that he put a DET engine in so i can prolly run 14psi when i get the rest sorted

Ahhhh sweet, so a new fuel pump for you then???

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
    • EMU Classic. For what I need it to do I see no reason to upgrade. Link and Haltech would both cost an extra chunk of money for a lot of unutilized features
×
×
  • Create New...