Jump to content
SAU Community

Recommended Posts

Hi guys, Not happy at all but I think I've blown a turbo or turbo's. Engine isfresh. Rebuilt N1 spec motor with 4000km on it. Has Rebuilt R32 Nismo Turbo's.

Had some work done, tuned etc. Car is making 302rwkw on 18 psi. Been driving it for 2 weeks since and its been great and fine - no issues, but today I noticed a tiny bit of whit smoke under boost. I didnt think too much of it. But then earlier I drove it, and gave it a bit of a boot. As I did I heard a big bang, with a cloud of black smoke. :( = not good

Now the car doesnt boost at all. Quite undrivable... And if it hits boost, like 3000 or over. Exhaust just pours out with ALOT of white smoke. :( From all the reading ive done, means a blown turbo or turbo seal. Does this sound like the turbo's have gone?

I suppose now I have the option of getting them rebuilt, or buying some new Garrett 2860's or something etc. What do people recommend. $2-3k is probably about my budget.

Link to comment
https://www.sau.com.au/forums/topic/397660-r32-gtr-did-i-blow-my-turbos-oh-no/
Share on other sites

Im happy with the power im making. I just want to get this fixed and for it to be reliable. so Maybe 2860 -7's?

http://www.frsport.com/Garrett-GT2860R-707160-7-Ball-Bearing-Turbocharger-Nissan-Skyline-R34_p_7829.html

Is this the right part number?

Edited by 91BNR32

Im happy with the power im making. I just want to get this fixed and for it to be reliable. so Maybe 2860 -7's?

A pair of -7s will probably be about $400 cheaper than -9s once you take into account new actuators. From the rb26 dyno sticky they seem identical to at least 300kw, but -9s would work a bit better if you push higher.

You should be able to get them locally for that sort of money - check out the Traders section.

Put it this way - the bad news is you've blown turbo(s).

The good news is, they were crap to begin with so you can put on something much better.

The replacement option for response (-9s or -7s) will make just as much power as your Nismo turbos, but will be noticeably more responsive.

Rebuilding to start off with was kinda a waste of money unfortunately.

Put it this way - the bad news is you've blown turbo(s).

The good news is, they were crap to begin with so you can put on something much better.

The replacement option for response (-9s or -7s) will make just as much power as your Nismo turbos, but will be noticeably more responsive.

Rebuilding to start off with was kinda a waste of money unfortunately.

Thanks for the advice. -7's sound like the go to still have a more responsive 300awkw. The nismo turbos were already freshly rebuilt when I got the car. I guess they couldn't handle 19psi? :(

Any idea on what $$ for labour on a full turbo swap?

This seems okay. I dont wanna sound dumb but what are the actuators used for?

Controlling boost pressure.

As for turbo swap, give a few places a call.

If they tell you they need to take the engine out, hang up... After you tell them they're morons!

Controlling boost pressure.

As for turbo swap, give a few places a call.

If they tell you they need to take the engine out, hang up... After you tell them they're morons!

Ask deano. Haha he is doing his -5 upgrade

At the moment. He has spent 2 days so far. He is spewing he didnt pull the motor out

Ask deano. Haha he is doing his -5 upgrade

At the moment. He has spent 2 days so far. He is spewing he didnt pull the motor out

I spose it comes with experience. I don't have it but know people that can have them out and in within 5 hours.

Also, get Deano to call or PM me!

Is it worth the lag and just going to 300kw? I don't think so. Besides its been discussed to death. -7 300kw beats -5 300kw down the quarter. Don't know where I saw it, but one of the -5 vs -7 threads yielded that.

What kind of sick individual buys -5's to make 300Kw, unless they are planning to go further at a later date ?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
    • What ECU are you running? This is probably the biggest question. If it's a PowerFC, I'd probably change the ECU and get something newer that will handle the injectors in a nicer way.
    • FYI: Racebox RE7R Custom Tunes Released!   https://goracebox.com/.../2017-infiniti-q50-q60-re7r-tcm...   FOR GEN 2 (21+) VEHICLES, PLEASE SEE NOTE AT BOTTOM See more   But whomever tuned your car is the tuner you should go back to, AMS, Sonictune or BT Tune....
×
×
  • Create New...