Jump to content
SAU Community

Recommended Posts

okay, got the car back last tuesday, mechanic pulled the timing down and got it to run rich so its a flamin mongrel at cold starts, and is slow as all hell and made me put around the area in it.
over the 350odd km ive done over the week, driving to maccas and trying to pickup barely legal bitches from epping plaza,

it has,
developed a small waterleak
started leaking from the rear turbo drain
shredded a power steering belt for absolutely no f**king reason lol

just dropped it off to the mechanics for a bit and well see how we go with more timing n leaks fixed :)

car had been missing between 1krpm and 3krpm last week.
pulled out the afms to swap them over and noticed something.
i wont go into great detail just yet, but ill leave this here.
1238119_10203356999828684_350051861_n.jp


this weekend was nuts


pulled out the air flow meters and noticed this in the front turbo intake
1625540_10203380531496961_1857750209_n.j

okay then...


had a better look.

1898100_10203380533297006_653260278_n.jp

f**k thats alot of metal man
1974988_10203380531816969_1335533594_n.j10001558_10203380532176978_1769188579_n.

f**k.

1796686_10203380532816994_1555494939_n.j




the mechanic i had put it all together had dropped a nut into the intake, obviously being rubber it wouldnt have made a noise so he didnt notice it.
the nut was small enough to slowly shred up the blade over time.
had i not decided to check the afms id have never seen it, and it would have eventually blown up and sent bits of steel into my engine.

i had gone in this morning and i am very very pleased with the outcome.
he had offered to have them rebuilt and do the necessary precautionary checks on the motor to make sure its unharmed.

plenty of mechanics that i know of wouldnt have owned up to the error and would have told me to go f**k myself, but im glad that this guys a true gentleman and offered to repair it all for me.
i guess good customer service and looking after customers isnt dead afterall :)

everything will be back on track soon enough!

  • Like 2

the guy felt so bad about it hes pushing me to get it to him ASAP so he can get me on the road again.

im buying him a slab of beer for this, and im definitely going to be getting him to do further work etc.

  • Like 1

fuark.
Lucky.
Had a nut destroy a turbo when I had my second last GTST.
Doing 110 on the M1, gave it a hit, heard a chink, felt a sudden loss of power, big ass bang, smoke out from under the hood.

Shattered the impeller, split the outer housing wide open, shredded the front silicone intake pipe and left little dents in a square foot area under the hood and inner guard, etc, luckily none of that went into the motor.

Your mechanic sounds like a top bloke too, so cheering there. :yes:

fuark.

Lucky.

Had a nut destroy a turbo when I had my second last GTST.

Doing 110 on the M1, gave it a hit, heard a chink, felt a sudden loss of power, big ass bang, smoke out from under the hood.

Shattered the impeller, split the outer housing wide open, shredded the front silicone intake pipe and left little dents in a square foot area under the hood and inner guard, etc, luckily none of that went into the motor.

Your mechanic sounds like a top bloke too, so cheering there. :yes:

holy f**k, thats intense!

been following this build for ages man, youre basically building the car of my dreams. cant wait to see this thing running :yes:
btw that whole impeller damage thing is crazy

Edited by rekoyl116

haha thanks dude, while ive always wanted a wide body rb26 sedan, this isnt my dream car, it would have been my dream car if it was my original sedan, which the new owner bastardised and crashed :(

told the mechanic not to stress to much, hes got a month to get it sorted.

  • 4 weeks later...

well. im convinced this car is some form of possessed ex wangan Devil R voodoo witchcraftmobile
swapped over the AFMs and fixed a few other issues like a bung o2 sensor and some vac leaks and the miss is almost gone and the AFRs are looking pretty good
that said the temp wont go over 1/4 way,

the devil R part

the clutch fans clutch didnt engage, as soon as my mechanic touched it, slicing the end of his finger clean off...
this thing bites back....










ps: hes fine, skin graft n shit

the clutch fans clutch didnt engage, as soon as my mechanic touched it, slicing the end of his finger clean off...

this thing bites back....

ps: hes fine, skin graft n shit

Oh wow what the eff? Glad to hear he is ok

This car of yours is definitely cursed by some voodoo sh!t.

yeah.. i dont know what to expect from it.
the whole cars have soul this that thing, i agreed with it to an extent,
now im adamant this thing has a soul...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...