Jump to content
SAU Community

Recommended Posts

Had mine in for about 1000kms and love it. went to a track day last week and have a drag day at the end of the month. Do get chirps taking off sometimes if im at a complete stop, if i have a slight roll its nice and smooth taking off.

Clutch in, so far so good. Its acting like a twin plate at the moment, cant take off without spinning the wheels lol. The pedal is lighter somehow than the old excedy cushion button, which is awsome since the NPC carbotic is a much tougher clutch.

Only thing was the spigot bush that came with the NPC was 1mm thicker in ID so had to source another one.

Clutch in, so far so good. Its acting like a twin plate at the moment, cant take off without spinning the wheels lol. The pedal is lighter somehow than the old excedy cushion button, which is awsome since the NPC carbotic is a much tougher clutch.

Only thing was the spigot bush that came with the NPC was 1mm thicker in ID so had to source another one.

You and your shimmed diff lol

Well 2 weeks of 360kw and my Excedy Cushion button shat itself :/ so I'll call NPC and see what they recommend for 400kw as that's my next stop lolz

was it the pink pressure plate Exedy or the silver plate? saying that the NPC one is crazy good, so good I feel sorry for my gearbox LOL

was it the pink pressure plate Exedy or the silver plate? saying that the NPC one is crazy good, so good I feel sorry for my gearbox LOL

It was that long ago i cant remember.... It hasnt done many KM's but its been in there a while... i think it was pink, i know the plate was pink anyway....

For 400kw they will recommend a twin plate

Ghey! :(

For 400kw they will recommend a twin plate

I don't know why they would. Our NPC single plate 10" clutches are both holding 400-450rwkw happily for over a year now. Drag events, circuit racing. No problems.

We rate them up to 600whp before we suggest a twin plate is necessary

It was that long ago i cant remember.... It hasnt done many KM's but its been in there a while... i think it was pink, i know the plate was pink anyway....

Yep, the pink ones are made here, they're pretty much just modified factory spec pressure plates as Jim Berry told me, he goes the Silver ones are from Japan and they're suppose to be more serious.

I've had the Silver plate before from a R32 GT-R with a 4-Puk Ceramic, did me well for over 1 years till I sold the car, wonder if it's still going strong with the 3rd owner.

Ah. I have that npc 10", but i swear the guy said it will hold up to 400kw and after that a twin plate is recommended. Maybe i miss heard.

It's possible that slight arse covering is being done there. Maybe they don't want to say they can do something and then have one guy prove them wrong.400wkw is getting close to where we've tested them up to so I'm guessing that would be why they would say that

I don't know why they would. Our NPC single plate 10" clutches are both holding 400-450rwkw happily for over a year now. Drag events, circuit racing. No problems.

We rate them up to 600whp before we suggest a twin plate is necessary

This is what i want to hear! :yes:

I'm referring to the 5puk button variety btw. The organic we don't really push past 300rwkw

Yep just spoke to them about it, with modification he is confident it will hold the 400rwkw...... BUT it'll be a little pigish to drive daily :( anyone using one of these in a daily?

Hmmm thanks guys, will research all options but the guys at NPC seem to be the best in terms of knowledge etc so far :)

The button can be modified to hold 400kw so that should do!

Yep just spoke to them about it, with modification he is confident it will hold the 400rwkw...... BUT it'll be a little pigish to drive daily :( anyone using one of these in a daily?

I use mine every 3rd night? not too bad. I just drop it at around 1700rpm, I don't bother driving it smooth (clutch will last longer). Up the car park ramp at my gym is gold, there's a speed hump midway up. I usually just handbrake then chirp it over, people think I am retarded.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...