Jump to content
SAU Community

Recommended Posts

Hi guys I'm new to this site but I know there is some1 that can help me I wana bring my skyline over from nz and i would be great full if there is some1 that could help me my main concern is getting the car register if anyone knows some body that does all this shit can you give me a contact number I'd love to have the car here it is one of the mintest r32s in nz highly moded Cheers

Link to comment
https://www.sau.com.au/forums/topic/398506-r32-gtst/
Share on other sites

I have they just say to me no to much modifications not worth it but I no its possible just need some help from some on that has done this before I could get the car here and then they fail it for a f*k al reson and I waste 3grand just getting it here thanks for the advise

Link to comment
https://www.sau.com.au/forums/topic/398506-r32-gtst/#findComment-6328895
Share on other sites

do you have import approval yet?

you cant just bring a car in from overseas willy nilly, needs to be approved

in your case as a personal import, in which you will need to supply proof of ownership for at least 12 months etc

speak to an importer

Link to comment
https://www.sau.com.au/forums/topic/398506-r32-gtst/#findComment-6328898
Share on other sites

Right yeah iv spoken to them about the approval and that seems straight forward the car is all up to nz certification I just don't wanna spend all this money and then I can't get it reg here because maybe the aus certifications are diffrent to the ones back in nz it's a freaky process. Thanks guys for the comments keep them coming cheers

Link to comment
https://www.sau.com.au/forums/topic/398506-r32-gtst/#findComment-6328962
Share on other sites

get the car over here and then take it back to standard which will make it heaps easier to get passed/through rego, our laws here arent as easy going as NZ, once passed you SHOULD be able to mildly mod it if not too over the top(ie NO SCREAMER pipe)

Link to comment
https://www.sau.com.au/forums/topic/398506-r32-gtst/#findComment-6329422
Share on other sites

With enough money anything is possible. Revert it to stock exhaust etc, make sure it's all tidy. And throw it on a boat, put 5k aside for all the little fee's / compliance in AUS (if needed) ..

Pics of this bad boy! Mint 32's are getting rare.

Link to comment
https://www.sau.com.au/forums/topic/398506-r32-gtst/#findComment-6331194
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
×
×
  • Create New...