Jump to content
SAU Community

Recommended Posts

I used to love my old Turbosmart Supersonic, had a cool schh schh schh sound between a vent and a dose. Problem was though, literally EVERY time I got pulled over, the cops would either pick on or notice it.

Ended up going to an ARC which I also had VTA, didnt sound bad either. This was due to my cooler piping not being stock and not having anywhere to recirc to and my own laziness in not rectifing this lol.

Also wasn't running a MAF ;)

Bahahahahaha. Lol. I'm sorry this thread is awesome makes my day so much better reading it.

Dude! You obviously want an atmo bov so go on YouTube or go check out George street of a sat night.

That is all dot dot dot dot.

I only changed mine to a Turbosmart Raceport when I went to single turbo and also ViPec ems. Getting rid of that also gave my oil cooler a home. I'm a fan of the standard GTR valves as they are proven and work well.

I just needed some extra space ;) lol

Hey Fellas, Serious question.. If someone had to run a haltech ecu which eliminates the purpose of the standard afms... would that make a aftermarket BOV work ok?

I've got a R32 GTR, Standard BOV's and near stock... Not intending on changing my bov's either they sound good and cops cant f**k me up but was just curious hey

thanks !

Yes that's fine.

I wonder why so many people dont do it then if its going to make the difference between making your car run like shit and making it run fine...

ah well.. thanks for the response man :)

I wonder why so many people dont do it then if its going to make the difference between making your car run like shit and making it run fine...

ah well.. thanks for the response man :)

Read this 4 times still no understand

You wonder why they don't change it

Or you wonder why people do it

Read this 4 times still no understand

You wonder why they don't change it

Or you wonder why people do it

Sorry it was regarding the haltech i spoke about.

if say you were to run one and it would make your car run good with aftermarket bov's then why dont people do it rather then just chucking a aftermarket bov with standard afm which leads to dramas.

Sorry it was regarding the haltech i spoke about.

if say you were to run one and it would make your car run good with aftermarket bov's then why dont people do it rather then just chucking a aftermarket bov with standard afm which leads to dramas.

Well they aren't exactly cheap lol.

Most people that run atmo bov's either don't know the problems they can cause, or they aren't reallyyyyyyyy that interested in performance and so wouldn't spend a lot of money on an ECU with capabilities like a Haltech. Just judging by appearance, most people I can see who ask about running atmo bov's on here tend to be all about the image of fast cars. They like the noises and the appearance, but don't want to spend the money to make it all work properly.

Not saying everybody who runs an atmo bov is in that category. Just an observation.

Well they aren't exactly cheap lol.

Most people that run atmo bov's either don't know the problems they can cause, or they aren't reallyyyyyyyy that interested in performance and so wouldn't spend a lot of money on an ECU with capabilities like a Haltech. Just judging by appearance, most people I can see who ask about running atmo bov's on here tend to be all about the image of fast cars. They like the noises and the appearance, but don't want to spend the money to make it all work properly.

Not saying everybody who runs an atmo bov is in that category. Just an observation.

Very True.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • Bunnings would have just handed you your money back on that one!
    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...