Jump to content
SAU Community

Recommended Posts

Hey guys,

Was changing my oil this arvo and noticed that my front driverside front driveshaft boot is in a word GONE. What would i need to fix this issue. You'll understand better when you see the pics.

http://img402.images...4/p5090010a.jpg

http://img401.images...12/p5090011.jpg

I'm in need of a passenger side inner boot if you find an aftermarket or oem part to fit. There are wraparound ones you can temporarily use if you get stuck.

That one is certainly the worst I have seen, did you find the boot?

Sorry to see that Josh,

I probably don't need to tell you, but get it seen to pronto. I was a tight ass and left the boots cracked and separated for a few thousand kms on a honda. Instead of costing me a few hundred, it cost me a lot more because the uni joints went. The click on turning/accelerating sound that you get from worn unis.

Sorry to see that Josh,

I probably don't need to tell you, but get it seen to pronto. I was a tight ass and left the boots cracked and separated for a few thousand kms on a honda. Instead of costing me a few hundred, it cost me a lot more because the uni joints went. The click on turning/accelerating sound that you get from worn unis.

Yeah im not driving it till I get it fixed. Crap timing as I was bout to drive it to cairns on friday for a holiday now I have to take the missos corolla seca.

That's the same one as failed on mine. I used these aftermarket ones: http://www.ebay.com.au/itm/220865687512?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649

You just need to specify the size you need at each end (~75mm & 27mm) & they'll send it to you within 1 or 2 days, at least it arrived that quick for me.

The boot was a couple of mm bigger than it could have been but the stainless ties held it OK (so I was told by the mech who put it in for me).

That's the same one as failed on mine. I used these aftermarket ones: http://www.ebay.com.au/itm/220865687512?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649

You just need to specify the size you need at each end (~75mm & 27mm) & they'll send it to you within 1 or 2 days, at least it arrived that quick for me.

The boot was a couple of mm bigger than it could have been but the stainless ties held it OK (so I was told by the mech who put it in for me).

Hard to fit leon? Thats great news thanks for the link. Do you know what your measurement was by any chance?

I decided the same thing. Only bought the CV boot so I could get it done in my timeframe rather than waiting for the mechanic to order it in. The good thing about you being in Brisvegas is your specialist with most likely have one on the shelf

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...