Jump to content
SAU Community

Recommended Posts

Wrecking complete R33, suspected blown head but not too sure, just don't have the time anymore to fix it.

Car has been sitting since April 2012 still street registered, body is straight besides smashed rear windshield from the recent storm that occurred in ACT.

PM for any parts or inquiries on the car.

Will let the whole car go for 2.5-3g.

Thanks !

  • 2 weeks later...

http://www.skylinesaustralia.com/forums/topic/410131-act-for-sale-mx73-cressida-perfect-cruiser-or-great-base-for-engine-conversion/

This!

No rego now....$1500 ono, comes with heaps of stuff I need the room so make an offer.

I can throw 3 months rego on for extra if you want. I don't have the space or time for it any more.

ARP Head Stud Kit Suit RB25DET, brand new only test fitted to block $150

Turbosmart Type 2 Blow Off Valve $50

RB30/VL Turbo Standard Setup, Original T3 turbo and Manifold, Dump Pipe Water and oil lines. Also have turbo plenum & runners also turbo brown top injectors all taken off running car,prefer not to seperate $800 taking offers

contact here or 0404429279

Best

1. to confirm coilpacks by swapping over with known good ones.

2. If it is coilpacks narrow it down to the one thats failing and replace it (one) or

3. If you have enough coin get some new splitfires for around $500. (if one has gone the others will follow soon after, one at a time - lol)

Not sure what the R33 S2 takes.

Your in Canberra ?

Best

1. to confirm coilpacks by swapping over with known good ones.

2. If it is coilpacks narrow it down to the one thats failing and replace it (one) or

3. If you have enough coin get some new splitfires for around $500. (if one has gone the others will follow soon after, one at a time - lol)

Not sure what the R33 S2 takes.

Your in Canberra ?

Yeah, I was going to do the 1by1 but I thought the rest will follow soon after, so was going to purchase a whole new set of splitfires. The R33 S2 takes a specific set (cannot use S1).

Yep, from Canberra.

OEM Nissan MCP-1330

Part # 22448-25U00

Are you sure it's the coils failing? Does it have a stock or aftermarket ECU? What Boost are you asking of it? Re Gap your plugs to a smaller gap ie. 0.8mm?

Oh and Welcome to SAU fellow Canberran R33 Driver. ;)

OEM Nissan Part Number is MCP-1330.

Are you sure it's the coils failing? Does it have a stock or aftermarket ECU? What Boost are you asking of it? Re Gap your plugs to a smaller gap ie. 0.8mm?

Oh and Welcome to SAU fellow Canberran R33 Driver. ;)

That is a very good question. I know very little about skylines / cars in general. (Just learning). I'll have to ask a mate of mine who will be able to answer the questions.

Before I bought the R33, the guy said he had tested a lot of things / replaced and seemed pretty certain that it was the coil packs.

I am currently running 1 bar or 0.8. PSR would be around the 8-9?

Thanks Rob, enjoying SAU so far, nice people around here. R33 is the way to go !

edit: It has new plugs as far as I'm aware (As of 3 weeks ago, pre-purchase).

edit2x The Mate: It's got a stock ecu, it's also running a dual stage boost controller which I think it's installed incorrectly. I also think the fact that you got 3x yellow jacks coils and 3x standards.

Edited by Jeremy90

Mismatched Coilpacks could be a thing, also if the ECU is Stock, any more than about 10psi boost, the ECU will freak out. search R&R (Rich & Retard). <<<------ aka Sinista :D

Airflow meter might need a clean also...

No probs. :)

What side of town are you on? If Northside I Could maybe assist?

I'm over at Dunlop. At this stage, I'm taking all offers haha. I'm only starting to learn about cars and decided I'd start with a R33 Skyline.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Thank you, 100% the intent. New coils were due and the 17" sixers look/feel loads better than the stock wheels. The aero options are so spot on.   Thanks for the warm welcome, all!
    • 98 r34 gtt Been rocking my latest setup and car running like never before. Have put a good 200 miles on it since all the latest changes and additions. everything is dialed in and have been driving it a bunch.   However, all a sudden last weekend as soon as I pushed throttle passed 4k and the engine stumbles, (slow or fast acceleration) hesitates and doesn’t go above 4100 or so, like a misfire. Everything else seems fine. I had a “good” set of coil packs that I removed from car when I first got it when I changed them over to new coils. I swapped out current ones for those, but no change. I also changed the plugs, no change. Seems to rev over 4 when out of gear with no load just fine no “misfire”, but as soon as its in gear with a load of any kind, it “misfires” as soon as rpm drop back below 4 k it runs perfectly, smooth, starts, restarts and drives fine as long as I keep it below 4 k while in gear. All readings look fine, no CEL   Any idea as to what could all a sudden cause an issue when pushing rpms passed 4 k?
    • When you say your cams are 272/262 is that 272in and 262ex?
    • We're arguing semantics. I am saying 45 accel and a 55 deccel ramp are "2 ways". Even a 45 degree ramp and an 89 degree ramp is "2 ways", because it is literally... two ways. The cusco 55/30 ramp is a 2 way. It's two ways. I get it though - in normal nomenclature a "2 way" would be 45/45 or 55/55 or 60/60 i.e the same locking in both directions. And something like 45/65 would be considered "1.5 way". I would then say if we're getting into the nitty gritty then every locking diff is a "2 way" diff and we should not speak in 1.5, or 2 ways but ramp angles instead. Which ofc if one of those ramp angles is 90deg, that side is not doing any locking. :p So Nismo don't obviously sell 3 things. The fact of the matter that they only sell two items really goes to show that there's a 2 way and a "1,5 way" which is really a 1 way. I believe the actual lockup for the 'adjustability' of the GT pro is really just setting preload for when the ramps actually start locking up. It's not changing how much 'wayness' there is. It is (somehow) horribly explained. People just buy whatever diff and go "locks up good bruh" and that's what ends up on socials forever.  
×
×
  • Create New...