Jump to content
SAU Community

Recommended Posts

Im competing in the dutch time attack championchip with my R32 GTR.

Lot to learn for me on this forum as i am the only one compeating

In time attack with an R32 gtr over here.

something about the car,

specs:

Build Rb26 engine,

(87mm) close to 2.7liter

Wossner pocketed forged pistons 8.2-1CR

Wossner forged steel con rods ARP bouten

ACL race serie's bearings

cranckshaft ballanced and polished

1.4mm Tomei MLS kop pakking

1.2mm oil restrictor naar cilinderkop

Tomei competition sump baffle kit

extendid sump 8.5liter

external head oil return

Tomei bronze valve guides

Tomei Valve retainers and folowers

Tomei B type valve springs 10.85mm

Tomei Procam 270graden 10.25mm lift

Haltech 33mhz boost control kit

Haltech platinum Pro ECU

AET T78-33D Single Turbo with trust 48mm external wastegate

Wiffbitz 3.5'' titanium race exhaust

Apexi 145mm super drag intercooler

Injector dynamics 1000cc injectors

Tomei 280 litre per hour in tank lift pump

Paxton aeromotive fuel pump

Sard Fuel Pressure Regulator

HKS Fuel rail, twin fed 11mm

C's quickshift

OS Giken twin plate clutch

Autosaurus 1 piece lightweight propshaft

Alcon Brake system, 370mm front, 350mm Rear

welded shassis+ Full FIA cage

Custom BC racing suspension system (car is sponsored by BC racing).

8266317.jpg

8249753.jpg

8249752.jpg

4995636.jpg

8247391.jpg

hope you will like it!

Link to comment
https://www.sau.com.au/forums/topic/400644-pro-import-r32-gtr-time-attack-car/
Share on other sites

Yes thats zandvoort haha ;)

your right, its not the most easy car to drive on zandvoort, with the tight turns, hills, and few ''brake killing'' brake points.

normaly im round the 2 minute barier on street tyres (we have to run dot tires in the series).

curently im running Falken RT615 semi's in hard compound, with some softer tyres like R888 ill have to take an

extra 3 seconds, will try that later this year.

first event i'm attending will be superlap battle its 17 of june!

You have to go to assen to, its a nice track for skylines, much faster than zandvoort ;)

Edited by Peter de Beus

Was hoping to do Zandvoort in early August but have some other things coming up which means I can't be os until later that month. Zolder and Spa appear to be a good track for street cars with some grunt. :)

I see the car still has plates. How is Holland for registration of modified cars. The cost to register cars in Belgium is rather scary.

Its quite easy to get plates, they don't look at anything. Most difficult is to keep them, as you cant make more then 98db, but normaly its no problem.

Let me know when you come over!

Spa is the best track there is, together with "the ring" ofcoars!

Edited by Peter de Beus

Hey mate,

What gearbox are you running? Fantastic looking 32!!

Not sure whether you were asking about improving lap times, but if you were :P for quicker lap times IMO ... (all relative to budget obviously)

Your engine looks the happiest bw 5500 to 8000 (I like to

400ps at 4500rpm newer turbos can do this) .... with a t78 there is definately time to be gained coming out of a slow corners 70km/h On the tyres you quoted ... I dare say ur loosing seconds off ur lap times as this will compound into the next turns.

What are ur tire options? The ones u quoted are at least a couple of

Seconds slower per lap compared to a Hankook z221 or yoko ao50

or even bridgestone re11s as these are all in the same class in oz...

Good luck for now !!

:cheers:

Thanks mate,

I know i can get seconds quicker with other tires.

I bought those tires for half the normal price, just to try how they are, i will try the the avon zzr or maby the new federal fz201. Yokohama and other brands are difficult to get, and verry verry expensive. Only yoko's that are available are the ad08, but im not sure how good they are....

I need an extra 10kmph in the slow corners.

It would help me with the slow spooling turbo...

Time to import some track tires! Haha

Will be upgrading the turbo for next season to a holset or gtx series or something like that

Yoko AD08's are one of the best street tyres around if not, the best for basically a street "semi" legal tyre. You would definitely pick up some time using better tyres and more speed in the corners!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
×
×
  • Create New...